Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Is a Curbless Shower? The Answer Most Irvine Homeowners Never Get
A curbless shower is a shower with no raised lip at the entry – the bathroom floor and the shower floor form one continuous, level surface, with water directed to a linear drain instead of held back by a curb. In most of Irvine, that definition hides the hard part: the vast majority of the city’s homes sit on slab-on-grade foundations with no crawl space, so a proper curbless install means saw-cutting the concrete to recess the drain, pitching the floor exactly 1/4 inch per foot toward it, and patching the slab back. Skip any step and water finds the wall instead. If you want it done right, call Groundwork Construction Co. of Irvine at (888) 578-4462 – estimates are free.

Key Takeaways
- A curbless shower removes the curb entirely; waterproofing and slope do the work a curb normally does.
- Slab foundations (standard in Irvine) require concrete cutting and drain recessing, not just new tile.
- Code-compliant slope is 1/4 inch per foot – with no curb as a backup, that tolerance is unforgiving.
- Membrane choice matters more without a curb; a failed install hides behind walls for 6-18 months.
- Expect $9,000-$28,000 for a full bathroom remodel in Irvine; a walk-in shower alone runs $4,500-$12,000.
Why a Curbless Shower Is Really a Waterproofing Problem in Irvine
Walk through Woodbridge or Northwood and you’ll see the same house repeated a few thousand times: a Mediterranean stucco tract home built between the late 1960s and the 1990s, tile roof, slab floor poured directly on grade. There’s no basement, no crawl space, no access underneath. When a homeowner in one of these villages asks for a curbless shower, the job isn’t a tile decision. It’s a concrete decision.
Here’s what that means in practice. The linear drain has to sit lower than the surrounding finished floor, so we cut a channel in the slab, set the drain body into it, and pour a patch that ties back to the original concrete. A bonding agent and the right patch mix matter – a cold joint that separates six months later will let water track under the tile bed. Then comes the preslope: the mortar layer under the waterproofing has to fall at 1/4 inch per foot toward the drain, and it has to be dead flat across the width of the shower. A curb gives you a second line of defense when a slope is slightly off. A curbless shower doesn’t.
In Irvine, that work happens under a permit and a city plan check. The building division wants to see the drain detail, the waterproofing spec, and the flood test before tile goes down. It’s a real inspection sequence, not a formality – and it’s one reason a curbless shower here is never a weekend project.
Choosing the Right Waterproofing System for a Slab Shower
The membrane is what actually keeps water out of your walls. Three systems show up in Irvine bathrooms, and they’re not interchangeable.
- Hot-mop (hot-applied asphalt membrane): the old standard. Durable, but it needs a skilled applicator, it can’t be patched easily, and it’s a poor fit over a freshly patched slab where you need precise, thin coverage at the drain.
- Sheet membrane: a bonded waterproof sheet with factory-made seams and a matching drain flange. Predictable thickness, predictable slope build-up, and forgiving at the recessed drain – which is why it’s a common choice for slab curbless work.
- Foam-board systems: pre-sloped foam panels with a liquid-applied or sheet coating. Fast and dimensionally consistent, and a strong pick when the slab is flat and the drain location is locked in early.
Without a curb, you lose the secondary water stop, so the membrane hierarchy and the drain flange bond carry the whole load. That’s the part a magazine photo of a sleek open shower never shows you. If you’re weighing this against a more conventional layout, our overview of Bathroom Remodeling lays out how the pieces fit together.
What a Curbless Shower Costs in Irvine
Pricing depends on whether you’re converting an existing shower or remodeling the whole bathroom around it. Here’s what our Irvine projects run:
| Scope | Typical Irvine Range |
|---|---|
| Walk-in shower installation (incl. curbless) | $4,500-$12,000 |
| Shower replacement | $3,000-$8,500 |
| Tub-to-shower conversion | $3,500-$10,000 |
| Full bathroom remodel | $9,000-$28,000 |
| Small bathroom remodel | $5,000-$12,000 |
The variables that push a number up are almost always structural: how much concrete has to come out, whether the drain has to move, and how far the new shower footprint shifts from the old one. Upfront pricing, no surprises – we scope the slab work before we quote, so the concrete cutting doesn’t show up as a surprise line item later.
For larger projects, we also offer $1,000 off projects over $10,000 and 0% financing for 18 months, which takes some of the sting out of a full Bathroom Remodeling in Irvine.

The HOA and Design-Review Layer in Irvine
Irvine’s master-planned villages come with their own architectural review. Before a curbless shower goes into a Woodbridge or Turtle Rock home, the village association may have a say in wet-area floor materials – specific tile sizes, slip-resistance ratings, sometimes even grout color. Those CC&Rs sit on top of the city’s building division plan check, which is a level of scrutiny a homeowner in Santa Ana or Tustin rarely runs into. Get the association’s standard early, because it can change the tile you fall in love with before you ever sign a contract.
The Materials and the Guarantee That Back a Curbless Shower
The right tile and drain system matter more on a curbless floor than anywhere else in the house. Groundwork Construction Co. of Irvine works from a curated supplier portfolio – Silestone and Caesarstone surfaces, Kohler fixtures, Moen trim – and specifies drain bodies and membranes that are engineered for curbless compliance, which removes the guesswork on slope tolerances. Our technicians carry up to 12 years of experience, and every visit is a background-checked, uniformed tech with a live person answering the phone 24/7 if something needs re-checking.
The bigger reason to care: water intrusion from a failed curbless install typically hides for 6-18 months before it shows up as a soft baseboard, a stained ceiling below, or a loose tile. By then the drywall is a total loss. The 730-Day Done Right Promise covers workmanship that long, so if the shower leaks inside that window, we make it right. Built to last, backed in writing.
FAQs
A curbless shower is a shower with no raised lip – the bathroom floor and shower floor are level, with a linear drain handling the water. It’s worth it if you want step-free access, a larger visual footprint, and easier cleaning. The trade-off is that it demands precise waterproofing and slope work, so choose a contractor who scopes the slab and membrane properly.
Yes, and slab foundations are the norm in most of Irvine, which is exactly why it requires a permit, saw-cutting the concrete to recess the drain, and a proper concrete patch. It’s not a tile-only job. Skipping the recess step is the single most common reason curbless installs fail here.
A walk-in shower installation in Irvine typically runs $4,500-$12,000, while a full bathroom remodel around it lands at $9,000-$28,000. The final number depends on how much concrete work and drain relocation is involved. Call (888) 578-4462 for an exact quote – estimates are free.
Usually one to three weeks once permits are in hand, because the slab patch has to cure and the shower pan must pass a flood test before tile. The concrete curing time is what sets curbless work apart from a curb install, and rushing it is how leaks start.
If you’d rather have it looked at, Groundwork Construction Co. of Irvine offers a no-pressure assessment in Irvine – call (888) 578-4462 and we’ll walk you through the slab, the drain, and the membrane before anyone touches a tile.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine, CA.