Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Irvine Homeowners
A fence is the one part of your property that takes the worst of Irvine’s weather and the most daily abuse, and when it starts leaning, rotting, or sagging between posts, you feel it before you see it. Wind off the canyon edges above Portola Springs and Great Park hits fences hard, and the marine layer that rolls in most mornings keeps wood damp long enough that cheap installs fail inside a few seasons. We handle fence installation in Irvine from the ground up: digging to proper depth, setting posts in concrete that meets our spec, and spacing rails so the panels stay true. Our technicians have up to 12 years of experience, and every project is backed by our 730-Day Done Right Promise. Call (888) 578-4462 and a live person will pick up, day or night.
What Our Fence Installation Service Includes
Every fence type solves a different problem. Here’s what we install across Irvine and what each one is built for, so you can choose with your eyes open instead of guessing at the home center.
Wood Fence
Wood is still the fence Irvine homeowners ask for most, and it’s the one that depends most on how it’s installed. We set pressure-treated posts below the frost-free depth, pour concrete footings, and use galvanized or stainless fasteners that won’t bleed rust stains onto the boards within a year. For HOA-governed properties in Woodbridge and Westpark, we build to the approved height and style before we ever cut a board.

Chain Link Fence
Chain link is the practical choice for side yards, pet runs, and anything backing onto a greenbelt or utility easement. We install galvanized or vinyl-coated chain link with tensioned top rails and brace bands set so the fabric doesn’t sag at the gates. If you need a commercial-grade run for a parking area or storage yard, we spec heavier gauge and schedule the posts accordingly.

Vinyl Fence
Vinyl holds its color through Irvine’s UV load without staining or painting, which is why it’s popular along south-facing property lines where wood bleaches out fast. We use vinyl systems with steel or aluminum inserts in the posts so they don’t bow in summer heat, and we set panels with expansion gaps so the fence doesn’t buckle. Expect vinyl fence installation in Irvine to run $3,500 – $9,000 for a typical residential lot.

Aluminum Fence
Aluminum is the go-to for pool enclosures, front-yard decorative fencing, and any run where you want a see-through boundary that still reads as a real fence. We rack and slope the panels to follow grade changes instead of stepping them, so the top line stays clean along Irvine’s sloped lots. Powder-coated aluminum resists the salt air that creeps inland from Newport Beach, and it won’t rust like wrought iron can at welded joints.
Iron Fence
Wrought and ornamental iron suits estate-style properties and gates that need to make a statement. We weld and prime every joint, apply a rust-inhibiting finish, and set posts in concrete footings sized for the weight of the panels. Iron needs attention at the weld points over time, and we build that maintenance into the install so you’re not chasing rust three years in.
Fence Repair
Not every fence needs replacing. We repair leaning posts, blown-out panels, broken gates, and rail connections across every material we install. When a repair makes sense, we say so and tell you how many more seasons you’ll get; when the fence is beyond saving, we’ll show you why rather than sell you a new fence you don’t need yet.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
Fencing isn’t one brand the way roofing or cabinetry is. Most of what makes a fence last comes down to the components: post anchors, concrete, fasteners, and the finish on metal. When we’re working near a property line that borders new construction, we keep an eye on GAF and CertainTeed roofing systems on neighboring structures so our crews don’t compromise a roofline or drip edge while setting fence posts and railings along the shared boundary. It sounds like a small thing until a fence crew punches through a neighbor’s fascia, and it’s the kind of coordination we handle so you don’t have to mediate it.
For gates and hardware, we work with standard commercial hinge and latch sets that hold up to daily use, and we match hardware finish to the fence material so the whole run looks intentional. Whether your fence uses familiar components or a specific gate system you’ve already picked, we can help you spec it and install it right.
Signs You Need Fence Installation Right Now
- Posts leaning or pulling out of the ground. A post that’s lost its footing is a fence waiting to fall over, and in Irvine’s wind events it usually takes two or three panels with it. If you can push a post and it moves, the concrete holding it has failed.
- Boards rotten at the base or along the bottom rail. Ground contact rot spreads upward and weakens the whole panel. Once a bottom rail is soft, patching a single board just delays the inevitable.
- Gaps, sagging panels, or a gate that drags. A gate that won’t swing cleanly usually means the post has shifted or the frame has racked. It’s a small fix early and a full replacement later.
- Rust bleeding through metal fencing or at welded joints. Surface rust is cosmetic; rust creeping into a weld or a post base is structural. Left alone, iron and steel fencing fails at its weakest point.
- An HOA notice or a fence that predates current codes. Irvine associations enforce height, style, and setback rules, and older fences often fall short. Getting ahead of a notice is cheaper than fighting it after a compliance deadline.
Our Fence Installation Process – Step by Step
- 1
Site walk and to-the-inch measurement. We walk the property line, confirm boundaries with your plat or survey, and flag anything underground before anyone digs. That’s where call-before-you-dig comes in, and we handle it as a standard step, not an afterthought.
- 2
Material and style consultation with upfront pricing. We show you the real options for wood, vinyl, aluminum, iron, or chain link and price each one in writing. The number you see is the number you pay, and nothing gets added because a job site turned out to be inconvenient.
- 3
Post setting and concrete work. We auger to depth, set posts, and pour footings with adequate cure time before hanging a single panel. Skipping cure time is the most common shortcut in fence work, and it’s the reason so many new fences lean within a year.
- 4
Panel, rail, and gate installation. Panels go up plumb and level, rails are fastened with hardware matched to the material, and gates are hung and adjusted so they swing freely and latch clean. We rack panels to follow grade rather than forcing a level line that fights the terrain.
- 5
Final walkthrough and cleanup. We walk the full run with you, check every gate and latch, and remove all spoils, old fencing, and debris. You get a written record of the work, and the 730-Day Done Right Promise covers it from there.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Irvine?
Most residential fence installation in Irvine runs $3,500 – $9,000, and the final number depends on material, linear footage, terrain, and how many gates are in the plan. A typical vinyl or wood fence for a standard suburban lot lands in that range. Aluminum fence installation runs $4,000 – $10,000 depending on height, finish, and how much slope the panels have to rack across. A short repair or partial panel replacement is a fraction of that, and we’ll quote it standalone if that’s all you need.
What moves the price: linear feet, material choice, post count, slope, gate quantity and hardware, removal and haul-away of the old fence, and any HOA or boundary complications. What protects you from overpaying: a written line-item quote, a clear scope before digging starts, and a contractor who won’t quote low and add change orders mid-project. Our free estimate includes all of that: material spec, footage, gate count, removal, and a fixed price. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off.
Fence Installation Near Irvine – Our Service Area
We install and repair fences throughout Irvine and the surrounding communities, including Tustin, North Tustin, Santa Ana, Costa Mesa, Newport Beach, Orange, and Fountain Valley. Whether you’re on a tight HOA lot in Woodbridge or a larger property in North Tustin, we scope the job the same way. If you’re in a neighboring city, our Fence Installation in Tustin and Fence Installation in North Tustin pages cover the local details, and you can always start with our home page to see the full range of services.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Irvine
Fence installation is the process of setting posts, hanging panels or rails, and mounting gates to create a boundary, privacy screen, or enclosure on your property. It involves site measurement, footing excavation and concrete work, material selection, and finish hardware. In Irvine, it also means confirming HOA rules and property line accuracy before any digging begins. Call (888) 578-4462 for a free estimate and we’ll walk the property with you.
Most residential fence installations in Irvine take one to three days from start to finish, depending on footage, material, and weather. Vinyl and wood jobs on a standard lot are usually done in two days; larger runs with multiple gates or slope take longer. Concrete cure time is figured into the schedule, not skipped. Call (888) 578-4462 to get a realistic timeline for your property.
Fence installation in Irvine typically costs $3,500 – $9,000 for vinyl or wood, and $4,000 – $10,000 for aluminum, with repairs costing less. Material, linear footage, slope, gate count, and old fence removal all affect the price. We give every homeowner a written line-item quote with no surprises. Call (888) 578-4462 for an exact quote. Estimates are free.
We install wood, vinyl, aluminum, wrought iron, and chain link fencing, plus gates and commercial runs. We work with the material brands and component suppliers that meet our spec for durability in Irvine’s climate. If you’ve already picked a material or have a style in mind from your HOA, we’ll work to it. Call (888) 578-4462 to talk through options.
A live person answers our phones 24 hours a day, seven days a week, so you’re never stuck with voicemail when a fence is down or a gate is hanging open. Same-day installation isn’t realistic for a new fence, but urgent repairs and safety issues get priority scheduling. Call (888) 578-4462 and we’ll tell you honestly when we can get out there.
Every fence installation we do is covered by our 730-Day Done Right Promise. If something isn’t done right, we make it right at no additional cost within that window. That’s one of the longest workmanship guarantees in the residential construction space, and it applies to the full scope of the work. Call (888) 578-4462 with any warranty questions before you book.
Clear the fence line of furniture, planters, and anything fragile, and let us know about irrigation lines, sprinkler heads, or buried utilities before we arrive. We handle utility locating, but your knowledge of the property saves time. Pet containment during installation is worth planning for, since gates will be open and panels come down. Call (888) 578-4462 if you’re unsure what needs moving.
Schedule Your Fence Installation Service in Irvine Today
Call (888) 578-4462 to schedule your free, no-obligation estimate. A live person answers 24/7, so you won’t wait until Monday for a callback. We’ll walk the property, spec the material, and put a fixed price in writing. From foundation to finish line, built to last and backed in writing by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co..