Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow to Measure a Window for Replacement in Irvine, CA: Start at the Rough Opening, Not the Frame
To measure a window for replacement in Irvine, measure the rough opening (the finished drywall reveal behind the frame), not the visible aluminum frame - because in Irvine’s stucco tract homes the stucco wraps over the flange and hides ¾ inch to 1½ inches of opening on each side. Measure the width at the top, middle, and bottom, take the smallest figure, subtract ¼ inch per side for shimming, and do the same for height. Order to that rough-opening number and the unit fits. Order to what you can see and it won’t.

If you’d rather not crawl a sill with a probe in the middle of an Irvine summer, our Windows & Doors team measures and orders every unit, and we answer calls with a live person 24/7 at (888) 578-4462.
Key Takeaways
- The visible frame on an Irvine stucco home is smaller than the rough opening it sits in.
- Measure rough opening to rough opening, then subtract ¼ inch per side.
- Take three width and three height readings, and use the smallest of each.
- Irvine plan check compares your submitted rough-opening dimensions to the unit actually installed.
- Custom sizes in villages like Turtle Rock are common and get ordered through Andersen or Marvin.
Why the Visible Frame on an Irvine Stucco Home Lies to You
Most window replacement guides were written for wood-frame or siding homes, where the trim comes off and the frame is right there. Irvine isn’t that. The city grew almost entirely as Irvine Company master-planned villages from the 1960s on, and the dominant house type is the Mediterranean and Spanish-revival stucco tract home in places like Woodbridge, Northwood, and Turtle Rock. Those homes went up with aluminum or vinyl flanged windows nailed to the rough opening, and then the stucco crew lath-and-scratched right over the flange and feathered the finish to the frame edge.
The result is a visual frame that reads roughly 1½ to 3 inches narrower and shorter than the opening behind it. Homeowners measure the glass, or measure the frame face, order a stock unit, and then the install crew pulls the old window and finds a hole too big for the new one. That’s a re-order, a custom lead time, and a hole in the wall in the middle of August.
Contractors who work outside Irvine miss this constantly. The city runs its own building division on top of village-level architectural review, so plan check and CC&R scrutiny here is tighter than what a crew from Santa Ana or Tustin is used to. Groundwork Construction Co. of Irvine measures Irvine homes this way on every job because we’ve watched the alternative play out.
The Correct Measuring Sequence for a Stucco-Pocket Window
This is the sequence. It takes about ten minutes per window and it’s the difference between a same-week install and a six-week custom order.
- Probe the stucco edge at the sill. Slide a stiff putty knife or a thin probe under the stucco return at the bottom of the window until it stops on the flange. That stop point tells you the flange depth, and it tells you how far the actual rough opening extends past what you can see. Typically you’ll find ¾ inch to 1½ inches of hidden opening per side.
- Find the drywall reveal on the interior. Inside the house, the opening is honest: you can see the drywall return and the jack studs. That interior reveal is your reference line for the rough opening dimensions.
- Measure width three times: top, middle, bottom.
- Measure height three times: left, center, right.
- Use the smallest width and the smallest height. In 30- to 50-year-old Irvine tract homes, framing has dried and settled and openings are rarely square. If the three widths differ by more than ⅜ inch, note it and plan for shimming.
- Subtract ¼ inch per side for shimming. That’s ½ inch off the total width and ½ inch off the total height from your smallest figures. That’s your order size.
Write the numbers down on the wall next to each window with painter’s tape and a marker. Not on your phone, where they get shuffled in with everything else. Each window gets its own set, even in the same room, because a 1970s Northwood tract will have variations window to window.
What a Custom vs. Stock Unit Actually Costs in Irvine
Here’s why the measuring mistake matters financially. A stock-size replacement is quick. A custom unit is a different conversation.
| Scope | Typical Irvine range |
|---|---|
| Standard-size window replacement (per job) | $4,500-$15,000 |
| Impact-rated window installation (per job) | $8,000-$25,000 |
| Custom-order unit (per window, added lead time) | Quoted per unit through Andersen or Marvin |
We order through manufacturer-direct channels, so a custom Turtle Rock size goes to Andersen or Marvin with the correct rough-opening spec the first time instead of the second. Every install comes under the 730-Day Done Right Promise: if the fit or the seal isn’t right, we make it right. Projects over $10,000 get $1,000 off, and we offer 0% financing for 18 months on approved terms - that’s what makes a whole-house window order land in a normal budget instead of getting deferred another year. Upfront pricing means the number you see is the number you pay.
Where Irvine Plan Check Fits In
Irvine requires a permit for window replacement, and the plan reviewer compares the rough-opening dimensions on your submittal against the unit that gets installed. Submit one number and install another and you fail the inspection and re-schedule - which in a busy summer means a two- to three-week delay sitting on a finished window you can’t sign off.

There’s a second layer in this city. Because Irvine is organized into village-specific HOAs and design-review boards, exterior changes on many properties need association approval before the work starts, and along the eastern and southern edges near open space and the Santa Ana foothills, the city enforces WUI fire-hardening requirements - ember-resistant vents, Class A assemblies, noncombustible detailing. Window and door units fall into that conversation when they’re part of an exterior upgrade. Getting the rough-opening measurement right is the first gate; getting the submittal and the association packet right is the second. Our technicians have up to 12 years of experience and handle both.
One operator detail worth knowing: the smallest measurement is the one that matters, not the average. We’ve seen homeowners split the difference between three readings and end up ⅛ inch out of tolerance at the sill. The window won’t close cleanly and you’re pulling it.
When to Stop Measuring and Call
Measure it yourself on a simple ground-floor vinyl slider in a newer Spectrum-area condo and you’ll be fine. Call us when any of these is true:
- The probe hits something solid within ½ inch, which suggests a nonstandard flange or a retrofit insert over the original.
- Your three width readings differ by more than ⅜ inch.
- The window sits above the first floor, or over a hardscape or a slope, where a fall is serious.
- You’re replacing a unit that’s part of a WUI-exposed exterior wall and the assembly spec matters.
- You’re replacing more than three windows at once and want a single order that matches.
Hanging a window on a second story or working from a ladder near a glass opening is a genuine height-and-glass hazard. A trained installer with the right equipment handles it; a homeowner balancing on a step stool does not. We’d rather measure it for you.
For the broader picture on how a full replacement program runs from measurement to final walkthrough, start at our home page and the Irvine service area page for what we cover in this city.
FAQs
Measure the rough opening, not the visible frame: probe the stucco at the sill to find the hidden flange, take three width readings and three height readings from the interior drywall reveal, use the smallest of each, and subtract ¼ inch per side for shimming. On Irvine stucco homes that last step is what makes the order fit. Call (888) 578-4462 for a free measurement and estimate.
Because on Irvine’s Mediterranean stucco tract homes, the stucco is finished over the window flange, so the visible frame is ¾ inch to 1½ inches smaller on each side than the actual rough opening. Ordering to the visible frame produces a unit that’s undersized for the hole. Call (888) 578-4462 and we’ll re-measure to the rough opening.
Yes, custom units carry longer lead times and a higher per-unit price than stock sizes, which is why getting the rough-opening measurement right the first time saves real money. Standard replacement jobs in Irvine typically run $4,500-$15,000, and impact-rated installation runs $8,000-$25,000. We order custom sizes direct through Andersen or Marvin. Call (888) 578-4462 for an exact quote - estimates are free.
Three width readings (top, middle, bottom) and three height readings (left, center, right), and the smallest figure wins in each direction. Irvine’s 30- to 50-year-old tract homes have settled framing that’s rarely square. Call (888) 578-4462 if your readings differ by more than ⅜ inch.
Yes. Irvine’s plan check compares the rough-opening dimensions on your submittal to the unit installed, so a mismatch triggers a failed inspection and a re-inspection delay. Get the numbers right before you order. Call (888) 578-4462 and we’ll handle the submittal dimensions alongside the order.
Ready to Get It Measured Right the First Time?
If you’d rather have it looked at, Groundwork Construction Co. of Irvine offers a no-pressure assessment in Irvine - call (888) 578-4462. We’ll probe the sill, pull the three readings, and tell you straight whether you need stock or custom. Live person on the line, day or night, and upfront pricing with no surprises.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine, CA.