Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterBacksplash, Tile & Flooring in Irvine, CA
Backsplash, tile and flooring work in Irvine usually runs $1,800 to $6,500 for a backsplash-and-counters refresh, and $4,000 to $14,000+ for a full kitchen floor and wall tile package, depending on material and square footage. This is the layer of a kitchen that takes the most abuse and shows the most wear: splashed grease behind the range, grout lines that have gone gray, and a floor that flexes underfoot because the subfloor was never prepped right. We install it once, correctly, so it holds up to Irvine’s hard water and heavy daily use.
Groundwork Construction Co. of Irvine handles backsplash, tile and flooring as part of a full kitchen build, not as a tossed-on add-on. That matters. Tile set over a floor that hasn’t been leveled, or a backsplash floated out of plumb to hide a crooked cabinet run, looks fine on install day and fails within a year. We treat the prep as seriously as the finish. All work falls under our 730-Day Done Right Promise: if something isn’t right, we make it right. You can see how this sub-service fits the bigger picture on our Kitchen Remodeling page, and you can reach a live person 24/7 at (888) 578-4462.
Our technicians bring up to 12 years of experience to every tile and flooring job. They arrive background-checked and in uniform, with upfront pricing you approve before a single tile is cut.
When You Need Backsplash, Tile & Flooring
Most homeowners call us when the kitchen has crossed from “dated” into “working against them.” Here are the situations we see most in Irvine kitchens:
- The 1990s tile has to go. Irvine has thousands of homes built in the late ’80s through early 2000s with 4-inch square ceramic backsplashes in mauve, beige or almond – and matching sheet-vinyl floors. When the cabinets get upgraded, that tile makes the whole room look tired.
- Grout is failing or stained beyond cleaning. City water carries minerals that etch unsealed grout and leave a haze that no amount of scrubbing fixes. Once grout starts cracking or darkening in the splash zone behind the cooktop, it’s a replacement job, not a cleaning one.
- The floor sounds hollow or moves. A popping or flexing floor is usually a subfloor problem or a thinset that didn’t bond. Tile over a bad base cracks at the grout lines first, then the tile itself. This is a rebuild, not a patch.
- You’re changing the layout. Moving the range, adding an island, or reconfiguring cabinets means the floor and backsplash get cut into anyway. Best to plan the new tile as part of the remodel rather than around it.
- Water damage behind the counters. A slow leak under the sink or a failed dishwasher line can soak the drywall behind the backsplash. New tile is the right moment to open it up, replace the board and confirm there’s no hidden moisture.
- Selling or refinishing before a listing. A clean, modern backsplash and floor are among the highest-visibility updates a kitchen can get. Buyers read the tile and floor first.
Our Backsplash, Tile & Flooring Process
Tile and flooring are finish work, but the result is decided in the prep. Here’s how we run it, start to finish:
- On-site measure and material consult. We measure the actual square footage of floor, wall and splash zone, check for out-of-square walls and floor deflection, and walk you through material options that fit your budget and the room’s traffic. For kitchen-wide projects we coordinate with the full plan on our Kitchen Remodeling in Irvine service.
- Demo and substrate prep. Old tile and flooring come out down to the substrate. We address any soft spots in the subfloor, level the floor plane, and replace or repair the drywall behind the backsplash before new tile goes up. Skipping this step is the number-one cause of cracked grout and popped tile later.
- Layout and dry-fit. We lay out the tile pattern – including edge pieces, outlets and corner cuts – before setting anything. This is where we confirm the pattern reads correctly across the room and that cuts land where they should, not in the middle of a focal wall.
- Setting and waterproofing. Floor tile is set over a properly prepped base with the right thinset for the material. Backsplash and wet-zone areas get appropriate waterproofing before tile. Fixtures and plumbing penetrated by the tile get planned openings, not hacked holes.
- Grout, seal and finish work. Grout is applied to spec, cured, and sealed where the material calls for it. We reinstall outlets, trim, toe kicks and any hardware, then clean the room thoroughly.
- Final walkthrough with you. We walk the finished floor and backsplash together – checking for lippage, level grout lines, consistent spacing and clean caulk at the counters and corners. Anything you want addressed, we address it. Then the 730-Day Done Right Promise is in writing, not just in conversation.
For larger projects, plumbing fixtures like a new faucet or sink often get upgraded in the same window. We install trusted brands such as Grohe, so the fixtures and finishes match the quality of the tile around them. GAF and CertainTeed appear across our exterior work, and we carry the same brand-first standard into every trade, from foundation to finish line.
Backsplash, Tile & Flooring Pricing in Irvine
You won’t get a real number until someone measures and sees the substrate. That said, here are honest ranges Irvine homeowners should expect for tile and flooring work in a typical kitchen. These are coordinated and installed by Groundwork, with upfront pricing – the number you see is the number you pay.
| Project | Typical Range | What Drives the Price |
|---|---|---|
| Backsplash only (ceramic or porcelain, ~30-40 sq ft) | $1,200 – $2,800 | Material type, outlets to work around, whether old splash is being removed |
| Backsplash only (glass, stone or large-format) | $2,000 – $4,500 | Cut difficulty, pattern (herringbone, mosaic), backing board work |
| Kitchen floor tile (ceramic/porcelain) | $4,000 – $9,000 | Square footage, subfloor repairs, removal of old floor, tile format |
| Kitchen floor tile (natural stone or large-format) | $7,000 – $14,000+ | Material cost, sealing requirements, more exacting substrate prep |
| Backsplash + floor combined | $5,000 – $18,000+ | Scope overlap, material selections, layout complexity |
What moves the number most: square footage, the material, and how much old tile and flooring has to come out. A straightforward porcelain floor over a sound subfloor runs far less than a marble floor over a floor that needs leveling. Pattern matters too – a herringbone or running-bond layout costs more in labor than a straight grid.
Three standing offers make a larger project more accessible: $1,000 off projects over $10,000, a free project estimate & design consult, and 0% financing for 18 months. No hidden fees, no vague bids. Call (888) 578-4462 for a free estimate, and we’ll give you a real number in writing.
Can You Install a Modern Backsplash Without Redoing the Whole Kitchen?
Yes. A backsplash-only project is one of the most contained updates you can make. We can replace the splash behind your counters without touching cabinets, counters or appliances, as long as the existing counter edge and cabinet line are sound. If you’re planning the splash as the first step toward a full remodel, we’ll scope it so the next project phase picks up cleanly.
One honest caveat: if the existing counters are being replaced, the splash gets done at the same time – the two pieces sit on top of each other, and removing one usually means removing the other.
What Tile Holds Up Best in an Irvine Kitchen?
Porcelain is the workhorse. It’s dense, resists water and staining, and handles the daily traffic of a busy kitchen. For a splash zone, ceramics and porcelain both do well; glass and stone bring more visual warmth but need more attention to sealing and cleaning. For floors, we generally steer homeowners toward porcelain or a strong porcelain lookalike over natural stone unless they’re committed to the sealing schedule stone requires. Our technicians have up to 12 years of experience setting all of these – we’ll help you match the material to how you actually use your kitchen, not just to the picture on a showroom sample.
Do You Handle Flooring Under Appliances and Cabinets?
Yes. We plan openings for the range, dishwasher, refrigerator and sink, and we decide up front whether flooring runs under the cabinets (a cleaner long-term build) or stops at the cabinet line (a less expensive option). Both are valid depending on whether the cabinets are staying or being replaced. You get a clear recommendation before the work starts.
How Long Does a Tile and Flooring Project Take?
A backsplash-only job usually runs one to two days on site. A kitchen floor typically takes three to five days, including demo, substrate prep, setting, grout and cure time. Combined backsplash and floor projects run five to seven days depending on square footage and material. Most jobs are completed in a single visit once the substrate is ready; if the floor needs significant prep or leveling, we build that into the schedule from the start. We’ll give you a firm timeline in writing before the first tile comes out, and you can call a live person 24/7 at (888) 578-4462 with any question while the job is in progress – no voicemail, no waiting until Monday.
Where Does This Fit in a Larger Kitchen Remodel?
Tile and flooring are the finish layer that pulls a kitchen together, and they work best when the cabinets, counters and plumbing are planned alongside them. If you’re updating more than one element, start on our home page to see how our remodel process is structured, or talk with us directly about sequencing. You can see what’s included on the Kitchen Remodeling in Irvine page – and if you’re planning a bathroom refresh in the same season, our team handles that work too.
We also serve homeowners across nearby parts of Orange County on the same standard: background-checked, uniformed technicians, upfront pricing, and a 730-Day Done Right Promise on every project. If your tile and flooring work happens alongside cabinets from KraftMaid or counters from Cambria, or a roof from GAF or Owens Corning down the line, the brand-first approach carries across every category.
FAQs – Backsplash, Tile & Flooring
How much does a backsplash cost in Irvine?
Backsplash work in Irvine typically runs $1,200 to $2,800 for standard ceramic or porcelain over a 30-40 square foot splash zone, and $2,000 to $4,500 for glass, stone or large-format tile with complex patterns. Material choice, outlet count and whether old splash must be removed drive the number. Call (888) 578-4462 for a free estimate – estimates are free and there’s no pressure to book.
Do you install floor tile and backsplash at the same time?
Yes, and it’s usually the smartest way to do it. Combining the jobs means one demo phase, one prep phase and one schedule, which cuts labor overlap and gets you a finished kitchen faster. Combined projects typically run $5,000 to $18,000+ depending on material and square footage.
Can you match new tile to existing cabinets and counters?
Yes. We work with existing kitchens every week and carry trusted brand partners across categories, so we can help you match a new backsplash to your counters and cabinet finishes – whether you’re updating a few pieces or doing a full kitchen. Bring us photos or the actual samples and we’ll talk through what reads well and what doesn’t.
Is it cheaper to repair or replace kitchen floor tile?
Repair usually wins when a handful of tiles are cracked and the surrounding tile is sound – we can replace individual tiles if you have spares or a close match. Replacement makes more sense when grout has failed across the floor, the subfloor is the problem, or the tile is discontinued and doesn’t match. We’ll tell you honestly which case you’re in, with upfront pricing for either path.
Do you offer free estimates for tile work in Irvine?
Yes. Every estimate starts with a free project estimate and design consult. We measure, walk the room with you, and put real numbers in writing with no hidden fees. There’s also a standing $1,000 off projects over $10,000, plus 0% financing for 18 months to spread the cost. Call (888) 578-4462 for a free quote – a live person answers around the clock.
What’s covered by the 730-Day Done Right Promise?
Workmanship on the project we install is backed by our 730-Day Done Right Promise – if it isn’t done right, we make it right, for the full two years. That’s in writing, and it’s one of the longer workmanship guarantees in the residential construction space. It applies to the tile and flooring work we perform, coordinated with the rest of your kitchen project.
Ready to Start Your Backsplash, Tile & Flooring Project in Irvine?
If your kitchen’s tile and floors have reached the end of their useful life, we can walk you through the options, give you a clear number in writing, and get the work done right. We answer calls with a live person 24/7 – no voicemail, no delays. Reach us at (888) 578-4462 for a free estimate, or explore the full scope on our Kitchen Remodeling in Irvine page. From foundation to finish line, with a 730-Day Done Right Promise backed in writing. Built to last, backed in writing.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine.