Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Irvine Homeowners Choose Toto Construction
We provide independent Toto construction service in Irvine: repair, replacement, and full installation of Toto toilets, Washlets, and faucets inside kitchen and bath remodels, backed by our 730-Day Done Right Promise. What makes our Toto work different is depth. We handle these fixtures weekly in Irvine homes, so we know which model lines fail and why, and we quote the exact parts and labor before we start. Groundwork Construction Co. of Irvine is an independent service provider. We are not affiliated with, authorized by, or endorsed by Toto. Call (888) 578-4462 for a free estimate.
Why Trust Groundwork Construction Co. of Irvine for Your Toto Construction?
Toto builds fixtures with real brass and ceramic internals, and that changes how service should go. A Drake II or Ultramax II is worth repairing when the problem is a fill valve, a flapper, or a wax seal; those parts are accessible, and the bowl and tank are built to outlast them. Our technicians have up to 12 years of experience, and they’ve learned to read Toto’s own part numbers before they open a supply house catalog.
We source OEM-compatible Toto parts for the components that affect performance and longevity, especially fill valves, flappers, and Washlet electronics. Getting the fill valve wrong on a G-Max or Tornado flush system shows up fast: weak flush, short cycling, or a tank that never quite settles. We also protect your warranty position. We don’t modify a Washlet’s internals or bypass a manufacturer seal without telling you first, and we document what we replaced so a later Toto warranty claim has a clean paper trail.
Every project, repair or remodel, is covered by the 730-Day Done Right Promise. If our workmanship fails, we make it right. Calls are answered by a live person, 24/7, and our technicians are background-checked and arrive in uniform.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Irvine
Irvine’s water runs moderately hard, and Toto’s high-efficiency designs are tuned tight. That combination produces a predictable set of failures we see again and again in Irvine bathrooms.
- Washlet S550e and C200 control board and sensor failures. The board and the position sensors sit close to moisture. Hard-water scale film plus the occasional power surge, common in older Irvine village wiring, leads to no spray, erratic spray, or a seat that won’t respond. It’s rarely the whole unit; it’s usually the board or a sensor.
- Fill valves and flappers in Ultramax II and Drake II toilets. Mineral buildup stiffens the flapper and grits up the fill valve seat. The symptom is a toilet that runs intermittently or flushes weak. This is the single most common Toto call we get in Irvine.
- Wax ring and flange seal failures on one-piece toilets. After years of use, the seal under a one-piece Toto compresses and the flange can crack. You get water at the base, and if it goes unnoticed, soft flooring and subfloor damage.
- Finish pitting on Silas and Keane faucets and shower trim. Aggressive tile and glass cleaners strip the finish, and bathrooms with poor ventilation hold the residue against the metal. Pitting and corrosion follow, usually on the spout and handle edges first.
- EcoPower and EcoFlush flush performance drift. These high-efficiency toilets depend on precise water level and a clean rim jet. When either slips, flush power drops, and homeowners assume the toilet is failing when it needs a valve adjustment and a rim-jet clearing.
Toto Parts & Our Repair-vs-Replace Approach
We don’t claim to stock Toto parts locally, and we won’t pretend a shelf exists that doesn’t. We source them per job: OEM Toto parts for critical components like fill valves, flappers, and Washlet electronics, and quality aftermarket equivalents for non-critical items like supply lines and seals when they meet or exceed OEM specification. That keeps performance where it matters without inflating the invoice on parts that don’t affect it.
Repair or replace is an honest call, not a sales pitch. Most Toto toilets and faucets are worth repairing because of their brass and ceramic internals. An older Washlet with discontinued electronics often tips the other way, and replacing the seat is the smarter spend. We’ll tell you which side of that line your fixture is on before you commit.
Call (888) 578-4462 and we’ll walk you through what your fixture likely needs, then quote it upfront. The number you see is the number you pay.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We identify the exact Toto model and series first, because an Ultramax II fill valve and a Drake II fill valve aren’t the same part. Then we test flush volume, check the water level against spec, and inspect the wax seal and flange on toilets, or the spray, sensors, and board on Washlets.
- 2
Repair or install. For repairs, we replace the failed OEM component and any related wear parts in the same visit when it makes sense. For installations during a remodel, we set the flange height correctly, level the fixture, and torque to Toto’s specification so the seal holds.
- 3
Test. We run multiple flush cycles, verify fill and shutoff, check for leaks at the base and supply, and confirm every Washlet function, spray position, temperature, and dryer, before we call it done.
- 4
Warranty and documentation. You get a written record of what we replaced, which protects your Toto warranty position, and the work is covered by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Irvine
We work on the Toto lines that actually show up in Irvine homes. That includes the Ultramax II and Drake II one-piece toilets, the Washlet S550e and C200 electronic bidet seats, and the EcoPower and EcoFlush high-efficiency toilets found in newer Irvine village builds and Spectrum-area condos. On the faucet side, we service and install the Silas and Keane collections, plus Toto shower trim and accessories.
Most of this work happens inside larger projects. Full bathroom remodeling is our most common Toto job in Irvine, and it’s where a fixture choice made early saves a headache later. We also handle walk-in shower installation and bathroom vanity installation, and we plan the Toto fixtures into the layout so supply lines, valve placement, and venting all line up before tile goes down.
We Also Service These Brands
Toto is one part of the picture. We install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures across Irvine kitchens and baths, and our brand partners extend to roofing, windows, and exterior work. That means one contractor coordinates the trades instead of three schedules that don’t talk to each other.
Irvine’s plan-check reality reinforces why this matters. The city was built almost entirely by the Irvine Company from the 1960s forward, so most work runs through village-specific HOA and design-review boards with uniform architectural standards, on top of a strict city building division. A bathroom remodel that touches plumbing and layout draws that scrutiny. We plan for it.
FAQs – Toto Construction Service in Irvine
Yes. We replace the control board and the sensors on the S550e, and on the C200, as an independent service provider. We diagnose first, because a no-spray or erratic-spray symptom can come from scale on the nozzle, a failed sensor, or the board itself, and we don’t swap a board when a cleaning and sensor replacement solves it.
It’s usually one or both, and Irvine’s moderately hard water is the reason. Mineral buildup stiffens the flapper and grits up the fill valve seat, so the tank never fully seals. We test both, replace the worn OEM parts, reset the water level to spec, and confirm the supply line and wax seal are sound.
Yes. Toto toilets, Washlets, and Silas or Keane faucets are common in our full bathroom remodeling projects in Irvine, and we plan fixture placement into the layout before rough-in. A common Irvine scenario runs like this: an Ultramax II starts running intermittently or flushing weak, a pro shuts off the water, drains the tank, replaces the OEM fill valve and flapper, checks water level and flush performance, and confirms the wax seal holds, often recommending a full rebuild kit if several parts show wear.
Yes. A leak at the base of a one-piece Toto is usually a compressed wax ring or a cracked flange, not a failed bowl. We pull the fixture, inspect the flange, replace the seal, and reset the toilet level so the new seal seats correctly. Left alone, that leak softens flooring.
Mechanically, often yes; cosmetically, it depends on what you can live with. Toto’s brass internals and ceramic cartridges are rebuildable, so a faucet that drips or runs stiff is usually worth fixing. Corrosion that has eaten through the finish won’t come back, though, so we’ll quote the repair and the replacement and let you decide. Call (888) 578-4462 for an exact quote; estimates are free.
Pricing depends on whether you’re repairing a fixture or remodeling the room around it. Repairs run far less than a remodel; here are our standing Irvine ranges for the projects where Toto fixtures usually appear.
| Service | Typical Range in Irvine |
|---|---|
| Full Bathroom Remodeling | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
No-hassle upfront pricing applies here: the number you see is the number you pay. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available. Call (888) 578-4462 for an exact quote; estimates are free.
Book Your Toto Service in Irvine, CA
Whether your Washlet S550e has stopped spraying, your Ultramax II won’t stop running, or you’re planning a bathroom remodel and want Toto fixtures done right the first time, we’re ready. Call (888) 578-4462 to schedule your free estimate and design consult. A live person answers, 24/7, and every job comes with upfront pricing, background-checked uniformed technicians, and our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.