A Groundwork company - serving Irvine, CA

PGT Construction Service in Irvine, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Irvine Homeowners Choose PGT Construction

Groundwork Construction Co. of Irvine is an independent PGT installer and repair resource for Irvine homeowners whose windows and doors need service rather than a sales pitch. What makes our PGT work different is that we read the actual series and glazing configuration on your unit before recommending a repair or a replacement, because a 1990s aluminum WinGuard impact slider and a newer vinyl EnergyVue single-hung fail for completely opposite reasons in this climate. We are not affiliated with or authorized by PGT. We’re an independent contractor that knows these products, and we serve Irvine villages from Woodbridge to Northwood to the condo clusters near UCI.

Call (888) 578-4462

Why Trust Groundwork Construction Co. of Irvine for Your PGT Construction?

PGT builds several distinct product families, and treating them as one thing is how homeowners get talked into the wrong fix. Our technicians have up to 12 years of experience working across PGT WinGuard Aluminum impact-resistant windows and doors, the PGT WinGuard Vinyl impact line, PGT EnergyVue vinyl single-hungs and sliders, and PGT sliding glass doors in both vinyl and aluminum. That range matters in Irvine, where a single master-planned village can hold four different PGT vintages on the same street.

We source OEM-compatible parts matched to the series whenever the model is still supported, because impact ratings live and die on matched components: a sash, a piece of laminated glazing, and a latch assembly are certified together. Swapping in a mismatched sash to save a few hundred dollars can quietly drop a window below its rated performance. Every project we install or repair is covered by our 730-Day Done Right Promise, and we carry the work in writing so there’s a real warranty behind it, not fine print. Calls reach a live person 24/7, and our technicians are background-checked and arrive in uniform.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common PGT Construction Problems We Fix in Irvine

These are the five failure patterns we see most often on PGT products in Irvine, and why each one happens:

  • Laminated impact glass haze on WinGuard units. The interlayer between the glass panes in an impact unit can take on a cloudy band creeping in from the edge as the perimeter seal gives way under years of unfiltered Irvine sun. It reads as fog, but the glass isn’t foggy. The seal has failed, and once moisture reaches the interlayer the haze is permanent.
  • Vinyl sash and frame distortion on sun-facing elevations. West- and south-facing EnergyVue vinyl windows absorb serious heat through the afternoon, and over time the sash can bow enough to stick when you open it or leave a visible gap at the meeting rail. Irvine’s dry summer heat drives this harder than a coastal city would.
  • Roller and track wear on PGT sliding glass doors. Sliders that grind, jump, or drop a corner usually have flat-spotted or seized rollers riding a track packed with grit. Left alone, a sagging sash can stop sealing at the sill and let water track in during a storm.
  • Perimeter sealant failure and blocked weep systems on aluminum impact units. When the sealant around the frame cracks and the weep channels clog, wind-driven rain from a Santa Ana event finds its way past the frame and into the rough opening. That’s a wall problem starting behind your window, not a window problem.
  • Out-of-square frames from settling tract homes. Older Irvine stucco tract homes shift, and a slightly out-of-square rough opening can make a perfectly good PGT window or door operate badly. The fix is sometimes re-shimming and re-sealing the opening rather than replacing the unit.

PGT Parts & Our Repair-vs-Replace Approach

For PGT service, genuine replacement sashes, hardware, and glazing are the first choice whenever the series is still supported, since impact ratings depend on matched components staying together. For true wear items like rollers and weatherstrip, quality aftermarket parts are a reasonable and honest call. We source parts per job after identifying the unit’s label data; we don’t keep PGT stock sitting around, so the right part gets ordered for your specific series instead of a generic substitute pressed into service.

Where we land on repair versus replacement comes down to two conditions. If the frame is distorted or the glass interlayer has already failed, patching it is a temporary answer and we’ll say so plainly, especially where impact compliance matters. If it’s a roller, a latch, or a seal, a matched-part repair often gets you years more service. Upfront pricing means you’ll know which path we recommend and what it costs before anyone touches the window. Call (888) 578-4462 and we’ll talk through what you’re seeing.

Our PGT Service Process – Step by Step

  1. 1
    Diagnosis. We pull the unit’s label to confirm the exact PGT series, impact rating, and glazing configuration, then inspect the glass edge, the sash, the track, and the rough opening. For sliding doors, we test operation and check the sill for water history.
  2. 2
    Repair or install. If it’s a matched-part fix, we install OEM-compatible rollers, hardware, sashes, or weatherstrip to spec. If it’s a full unit swap, we set a new sill pan, flash the opening properly, and seal the perimeter to Irvine’s wind-driven rain conditions.
  3. 3
    Test. Every window and door gets cycled open and closed, latched, and checked for square and seal before we call it done. On impact units we verify the latch and lock hardware meet the rating requirements.
  4. 4
    Warranty. Every project is backed by our 730-Day Done Right Promise. If something isn’t right, we make it right, and you have it in writing.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

PGT Products We Service & Install in Irvine

We work on PGT’s core window and door families: WinGuard Aluminum impact-resistant windows and doors, the WinGuard Vinyl impact line, EnergyVue vinyl single-hung and sliding windows, and PGT sliding glass doors in both vinyl and aluminum. That covers the impact-rated units common on Irvine’s wildland-edge homes along the eastern and southern foothills, where ember-resistant vents and Class A requirements shape the whole envelope, along with the standard vinyl and aluminum products found through Woodbridge, Northwood, and Turtle Rock. We also handle PGT window replacement and impact window installation alongside the roof repair that often comes up when a unit’s flashing or wall intersection gets disturbed.

We Also Service These Brands

PGT is one part of a wider set of brands we handle. We also work on KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, so a window replacement that turns into a kitchen or bath refresh stays with one contractor from foundation to finish line. Choosing a single-brand shop limits your options; we bring a curated portfolio of verified partners across every trade and help you pick quality, not just whatever’s in stock.

FAQs – PGT Construction Service in Irvine

Service Typical Irvine Range
Window Replacement $4,500 – $15,000
Impact Window Installation $8,000 – $25,000
Roof Repair $400 – $1,800

A typical Irvine PGT job often starts with a homeowner noticing a WinGuard slider that won’t latch cleanly and a cloudy band creeping in from the glass edge, usually traced to interlayer seal failure plus a settled or blocked sill track. A qualified local installer pulls the label data to confirm the series and impact rating, checks the rough opening and flashing, and then chooses between a matched sash replacement and a full unit swap with a new sill pan and sealant. Where the original install disturbed roof or wall intersections, the same visit often turns up flashing that needs repair before the new unit goes in.

Book Your PGT Service in Irvine, CA

If you have a PGT window, door, or slider that’s sticking, fogging, or leaking, we’ll give you a straight answer on whether it’s a repair or a replacement. Call (888) 578-4462 to schedule your free estimate in Irvine. We answer live, 24/7, and every project is backed by our 730-Day Done Right Promise with upfront pricing and 0% financing for 18 months plus $1,000 off projects over $10,000.

Written by the team at Groundwork Construction Co. of Irvine.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch