Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Irvine Homeowners Choose CGI Construction
We provide independent CGI construction and repair service in Irvine – that means cabinet installation, refacing, countertops, and full kitchen remodels built around CGI cabinetry and millwork, not sold from a factory showroom. What sets our CGI work apart is that we treat the cabinet box, the hardware, and the room around it as one system, because in Irvine they fail and perform together. We’re not affiliated with or authorized by CGI. We’re an independent Irvine contractor that works with these lines every week and knows where they go wrong.
To talk through a CGI cabinet, countertop, or kitchen project in Irvine, call (888) 578-4462. Estimates are free and the pricing is upfront.
Why Trust Groundwork Construction Co. of Irvine for Your CGI Construction?
CGI cabinet lines show up constantly in Irvine kitchen and bath remodels – Euro-style frameless boxes with full-overlay doors, Shaker-style painted and stained series, all-plywood cabinet boxes, and soft-close drawer and door hardware. Our technicians have up to 12 years of experience and have worked with all of it: hinge plates, glide tolerances, touch-up finishes, and the small construction details that decide whether a run stays square after the third summer.
We use OEM-compatible parts wherever they’re available, because matching hinges, glides, and finishes keep the original CGI fit and don’t create a warranty problem down the line. When a line is out of production, we’ll say so and recommend quality aftermarket soft-close hardware instead of pretending a discontinued part still exists. Every CGI project we complete in Irvine is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right – which is one of the longest workmanship guarantees in residential construction. Calls are answered by a live person, 24/7. Technicians are background-checked and arrive in uniform.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Fix in Irvine
CGI cabinets are well-built. Most of what we repair in Irvine isn’t a manufacturing defect – it’s water, weight, heat, or the floor underneath. Here are the failures we see most:
- Box swelling and joint separation around sinks and dishwashers. Particleboard and MDF boxes react fast to slow, undetected leaks – a dishwasher supply line seeping behind the cabinet, a sink caulk line that gave out two winters ago. By the time a homeowner notices, the bottom panel has already swelled and the joint has opened. Finding the leak source matters as much as replacing the panel.
- Drawer glide and hinge failure under heavy loads. Wide pot drawers in CGI soft-close systems take a lot of weight, and repeated loading wears the glide and stresses the hinge screws. Over time the screws pull from the box, the door sags, and the soft-close stop stops working. Matching OEM glides and hinges fix this cleanly when the box itself is still sound.
- Door and face-frame warp in painted finishes. Irvine’s dry Santa Ana wind events and the intense afternoon sun through west-facing windows dry out painted CGI doors unevenly, and that’s when you see a door that no longer sits flush. It’s a climate effect, not a bad paint job, and the fix usually involves adjusting the hinges and the door rather than replacing everything.
- Racked or misaligned cabinet runs on out-of-level floors. A lot of Irvine’s older tract homes and 1980s-1990s condos don’t have level floors under the kitchen. When a cabinet run is installed without shimming and leveling properly, the whole run racks, drawers stick, and doors walk out of alignment. We re-level the run against the actual floor rather than chasing the problem one door at a time.
- Loose or stripped hinge screw holes. Common in high-use kitchens where a door has been opened tens of thousands of times. Hinge screws work loose from the box, and if the hole strips, the door hangs and drags. There are proper fixes – hardwood dowels, threaded inserts, longer correct-gauge screws – and there’s a right way to do each one so the box doesn’t get drilled out.
CGI Parts & Our Repair-vs-Replace Approach
CGI hardware – hinges, glides, soft-close mechanisms, touch-up finishes – is what fails first, and matching the OEM part keeps the fit and the warranty intact. We source parts for each job rather than claiming to keep CGI inventory on hand. For older CGI lines that are no longer in production, quality aftermarket soft-close hardware is a real option, and we’ll tell you plainly when that’s the honest choice.
Our repair-or-replace call is simple. If the cabinet boxes are structurally sound and only hardware or doors are failing, we repair. If water damage or box swelling has compromised the carcass, we recommend replacement – not because it’s a bigger job, but because repairing a swollen box just moves the failure two years down the road.
For a straight answer on your CGI cabinets, call (888) 578-4462. The estimate is free and the pricing is upfront.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We inspect the CGI cabinet run, the box and face frame, the hardware, and the floor underneath. We check for the small water sources owners miss – behind the dishwasher, under the sink, at the toe kick.
- 2
Repair or install plan. We lay out what’s failing and why, then quote the fix or the new installation in writing. You see the number before work starts, and that number holds.
- 3
Repair or install. Hardware is replaced with matching OEM or quality aftermarket parts. New CGI installs are shimmed and leveled against the actual floor, not the assumption of one.
- 4
Test and adjust. Every door and drawer gets cycled, the soft-close is checked, and the run is confirmed flush before we’re done.
- 5
730-Day Done Right Promise. If anything we installed or repaired isn’t right, we come back and make it right – for two years.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Irvine
We work with CGI Euro-style frameless cabinets with full-overlay doors, CGI Shaker-style painted and stained series, CGI all-plywood construction cabinet boxes, and CGI soft-close drawer and door hardware systems. That covers cabinet installation and refacing, quartz and granite countertops over CGI cabinetry, backsplash work, island installation, and full kitchen remodels built around CGI cabinetry. Alongside that, we handle the countertop brands that pair well with these lines – Cambria and Silestone and similar quartz – and Kohler fixtures for the sink and faucet side of the job.
We Also Service These Brands
Groundwork Construction Co. of Irvine isn’t dependent on any one manufacturer. We also work with KraftMaid cabinets, Cambria and Silestone quartz, and Kohler fixtures, and our roofing, window, and paving partners include GAF, Owens Corning, Andersen, Pella, Belgard, and James Hardie. If your Irvine kitchen has a mixed-brand setup, that’s normal and we handle it fine.
FAQs – CGI Construction Service in Irvine
No. We’re an independent Irvine contractor and we’re not affiliated with or authorized by CGI. We work with CGI cabinet lines as a knowledgeable independent builder.
Yes – we use genuine or OEM-compatible hinges, glides, soft-close mechanisms, and touch-up finishes wherever they’re available, because matching OEM parts keep the fit and protect your warranty. When a CGI line is out of production and the original part no longer exists, we say so and recommend quality aftermarket hardware instead. Call (888) 578-4462 to talk through your specific CGI model.
Hardware repair – a hinge or glide replacement on a CGI cabinet run – is usually done in a single visit. A full cabinet installation on a standard Irvine kitchen takes a few days, and a full kitchen remodel built around CGI cabinetry is a multi-week project. We give you the schedule in writing before work starts.
We work with CGI Euro-style frameless cabinets with full-overlay doors, CGI Shaker-style painted and stained series, CGI all-plywood cabinet boxes, and CGI soft-close hardware systems. If you’re not sure which series you have, we can identify it on-site.
Proper repair with matching OEM parts doesn’t void a CGI warranty – mismatched or incorrect hardware is where problems start. We use OEM-compatible parts wherever they exist and explain the trade-off when they don’t, so you know exactly what your warranty status is before we touch anything. Call (888) 578-4462 with your model info and we’ll talk it through.
Here are our standing Irvine price ranges for CGI-related kitchen work:
| Service | Irvine Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
The final number depends on the scope, the CGI series, and what we find when we inspect the cabinets. Call (888) 578-4462 for an exact quote – estimates are free.
Book Your CGI Service in Irvine, CA
If your CGI cabinets have a sticking drawer, a door that won’t sit flush, or a kitchen that needs a full remodel built around quality cabinetry, the next step is a free estimate. Call (888) 578-4462. We answer live, 24/7, and every job is covered by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Irvine.