A Groundwork company - serving Irvine, CA

Jerith Construction Service in Irvine, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Irvine Homeowners Choose Jerith Construction

We install and repair Jerith aluminum and vinyl fencing and rail systems across Irvine as an independent service provider – we’re not a Jerith dealer and we’re not factory-authorized by the manufacturer. What sets our Jerith work apart is footing depth and gate-post engineering, the two things that actually fail on Jerith fence runs in Irvine’s clay soils. Every job is backed by our 730-Day Done Right Promise, and you can reach a live person at (888) 578-4462 any hour of the day or week.

Call (888) 578-4462

Irvine is a master-planned city built almost entirely by the Irvine Company from the 1960s onward, so most fencing work here runs through village-specific HOA architectural review and the city’s own building division rather than a patchwork of independent jurisdictions. That matters for Jerith installs. A Patriot Series aluminum run that passes plan review in a neighboring city can still get flagged in Irvine if the submittal doesn’t match the village’s approved style and setback, and we build that review step into every quote.

Why Trust Groundwork Construction Co. of Irvine for Your Jerith Construction?

Our technicians have up to 12 years of experience working with Jerith’s specific extrusion and bracket systems – the channel that receives each picket, the way the rail brackets seat into the posts, and how the gate hardware loads against a self-closing pool-code assembly. That familiarity is why we can tell you in the first visit whether a sagging panel needs its footing reset or just new hinges.

We source genuine Jerith extrusions, brackets, hinges, and post caps for any structural or visible component. Where aftermarket hardware makes sense – stainless fasteners or a proper concrete mix for the footing – we use it because it meets a higher standard without affecting the engineered fit. That distinction protects your fence’s warranty and its appearance five years down the line.

Jerith warranties cover manufacturing defects in the powder coat and extrusion; they don’t cover damage from an undersized footing or a hinge swapped for a cheaper one. Our job is to install and repair in a way that keeps your coverage intact. Every repair and install carries our 730-Day Done Right Promise, and technicians arrive background-checked and in uniform on every Irvine job.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Jerith Construction Problems We Fix in Irvine

  • Racked or leaning panels from shallow footings. A Jerith Patriot or Provincial aluminum run often starts leaning at the gate-side post after a few seasons. Irvine’s expansive clay soil swells and shrinks through wet winters and dry summers, and if that post was poured in a shallow hole without proper concrete depth, the gate’s closing load pulls it out of plumb. The panels themselves are usually fine.
  • Powder-coat chalking, fading, or scratch-through. Jerith aluminum powder coat takes a beating in Irvine’s inland sun and the irrigation overspray that hits a lot of backyard runs. UV exposure breaks down the topcoat over time, and a scratch through to bare aluminum will oxidize if it’s not touched up.
  • Gate sag and hinge-point wear on pool-code gates. The self-closing hardware on a Jerith pool gate is usually the first thing to fail – hinge fatigue, not panel failure. When a pool gate stops latching on its own, that’s a safety problem and a code problem, not a cosmetic one.
  • Loose or corroded post caps and bracket fasteners. This is a common shortcut on Jerith installs done with standard screws instead of galvanized or stainless hardware. A few wet seasons and the fasteners loosen or rust through, and the cap works its way off.
  • Vinyl Haven Series panel damage. Vinyl privacy sections can crack at a rail or pop a post cap in a Santa Ana wind event, especially where a run wasn’t anchored to the right footprint. A single damaged panel doesn’t mean the whole fence is done.

Jerith Parts & Our Repair-vs-Replace Approach

We don’t stock Jerith parts locally – there’s no warehouse of panels sitting around. Every component is sourced for the specific job, matched to the series and model on your fence. Genuine Jerith extrusions, brackets, hinges, and post caps go into anything structural or visible. Aftermarket stainless fasteners and a correctly mixed footing go in where they don’t affect the engineered fit.

The repair-vs-replace decision is honest and specific. A single racked section or a worn gate closer is almost always a repair – reset the footing, re-level the rails, replace the hinges. Full replacement makes sense when the powder coat is failing across the whole run or when the footings were undersized from day one and every gate-side post is on borrowed time. We’ll tell you which one you’re looking at before any work starts, and the number you see on the quote is the number you pay. Call (888) 578-4462 and we’ll walk you through it.

Our Jerith Service Process – Step by Step

  1. 1
    Diagnosis. We check post plumb on every run, measure footing condition where visible, and load-test every gate. On a Jerith aluminum fence that means checking the gate-side post first – it carries the most stress.
  2. 2
    Repair or install. For a leaning post, that’s pulling it, widening the hole to the right depth, and pouring a properly sized concrete footing. For a new install, it’s setting posts plumb in the correct footprint and seating the Jerith extrusions and brackets per spec.
  3. 3
    Test. Every self-closing gate gets cycled repeatedly to confirm it latches cleanly – a pool-code gate that doesn’t close on its own is a liability, not a finish detail. Rails get re-leveled and caps and fasteners get checked by hand.
  4. 4
    Warranty. The finished job is documented and covered by our 730-Day Done Right Promise. If it’s not done right, we make it right.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Jerith Products We Service & Install in Irvine

We work across the main Jerith fence families: the Patriot Series aluminum ornamental fence, the Provincial Series aluminum fence, the Haven Series vinyl privacy fence, and Jerith’s aluminum pool-code fencing with self-closing gates. Each series has its own post and bracket spec, and we match parts to the specific one on your property – never a generic panel substituted in. That applies whether you need a single section repaired or a full run installed inside a village HOA in Irvine.

We Also Service These Brands

Jerith fencing is one piece of what we do. Groundwork Construction Co. of Irvine works with a curated set of brand partners across every trade – KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures among them – so you’re not dependent on a single-brand outfit. One contractor from first call through final walkthrough.

FAQs – Jerith Construction Service in Irvine

Service Price Range
Aluminum Fence Installation $4,000 – $10,000
Vinyl Fence Installation $3,500 – $9,000

Book Your Jerith Service in Irvine, CA

Whether it’s a leaning gate post, a leaking self-closer, or a full Jerith fence run for an Irvine property, we’ll diagnose it honestly and quote it in writing. Upfront pricing, background-checked technicians, and the 730-Day Done Right Promise on every job. Call (888) 578-4462 for a free estimate.

Written by the team at Groundwork Construction Co.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch