Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Irvine Homeowners Choose Tremron Construction
Groundwork Construction Co. of Irvine provides independent Tremron construction, repair and installation service for homeowners across Irvine, CA. Tremron is a paver and hardscape brand, not a contractor, so the work itself falls to a local installer. What sets our Tremron work apart is that we match the manufacturer’s published installation tolerances on base prep, edge restraint and polymeric sand, then document each step for the HOA submittal your village will require. We’re an independent Tremron service provider and are not affiliated with, sponsored by, or authorized by the manufacturer. Our technicians have up to 12 years of experience with pavers, driveways and patios, and every job is covered by our 730-Day Done Right Promise. Call (888) 578-4462 to schedule a free estimate.
Why Trust Groundwork Construction Co. of Irvine for Your Tremron Construction?
Our technicians have installed and repaired Tremron products across Irvine’s master-planned villages, so they know each line on sight. Olde Towne, Plaza Series, Stonegate and Mega Oldenburg all behave differently under a vehicle load and under dry heat, and we plan the base and joint widths accordingly. Parts come from genuine Tremron stock in matching profiles and color families. When a series is discontinued or a production lot is gone, we say so up front rather than slipping in a mismatched paver and hoping you don’t notice.
Warranty-safe practice is not a marketing line here. We compact the base to Tremron’s spec, set edge restraint properly and use polymeric sand sized to the joint, because skipped steps are what void coverage later. Installers who cut base depth or bury pavers in sand fail the manufacturer’s own conditions first, which leaves you holding the loss.
We’re an independent contractor, which means we’re not shy about pointing out a defect in materials or in the original install. Pricing is upfront, the number you see is the number you pay, and projects over $10,000 get $1,000 off with 0% financing available for 18 months. Calls are answered by a live person, 24/7.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Tremron Construction Problems We Fix in Irvine
Most Tremron problems we see in Irvine trace to base and drainage rather than the pavers themselves. Here are the five that come up most.
- Efflorescence on gray and tan concrete pavers. White salt blooming is calcium migrating to the surface, and it shows up when water sits under the field because base drainage or joint sand is wrong. Scrub it off without fixing the water and it returns within a season.
- Polymeric joint sand washing out. Irvine’s sloped driveways and patio aprons shed water fast. Sand loses its bond, pavers shift, and the edge restraint loosens because the joint opened after the pavement started moving.
- Hairline cracks and corner spalling. Typically seen where a vehicle crosses the field daily. A thin base and a missing geotextile separation layer let fines pump up, the bedding loses support and corners chip under load.
- Color mottling and shade mismatch. Happens when a repair batch comes from a different production lot than what the original installer set. Color families vary run to run, which is why matching lot and series matters more than matching the name.
- Settlement at the apron and garage opening. The highest-traffic, highest-water area of a Tremron driveway. Pockets of loose base there mean the whole compaction was questionable, not just one paver.
A Tremron paver driveway several Irvine winters old starts showing white efflorescence and a few pavers rocking at the apron, usually because the original base was too thin and joint sand has washed out along the slope. A qualified local installer typically pulls the affected field, re-grades and compacts the base, resets pavers on proper edge restraint, and re-sands with polymeric sand matched to the joint width. When spalling and settlement cover a wide area, the recommendation shifts to full driveway replacement rather than chasing individual pavers.
Tremron Parts & Our Repair-vs-Replace Approach
We source genuine Tremron pavers in matching profiles and color families first. If the original series is discontinued or the production lot is unavailable, we use a color-matched compatible paver and tell you plainly what changed. We don’t claim to hold local stock. Materials are ordered to the job, inspected on arrival for shade and dimension, and swapped before they’re set if the run doesn’t match.
Repair is usually the honest call for isolated settlement, a short run of sand loss, or a single sunken apron section. Full field replacement makes sense when base failure is widespread or spalling covers enough square footage that patching costs more than it saves. We walk the field with you, show you what we’re seeing, and quote both paths. Call (888) 578-4462 for a free estimate and we’ll put the numbers side by side.
Our Tremron Service Process – Step by Step
- 1
Diagnosis. We walk the Tremron field, check for efflorescence, sand loss, edge restraint condition and paver movement, then probe base depth at trouble spots. Photographs go into the file for your records and HOA submittal.
- 2
Repair or install. For repairs, we lift the affected field, correct base depth and compaction, verify the geotextile layer, reset the pavers and lock the edge. For new installs, we build the base to Tremron spec for the intended load: driveway versus patio.
- 3
Sand and restraint. We re-sand with polymeric sand sized to the joint width, then confirm restraint is pinned and tight before the field is swept in and cured.
- 4
Walkthrough and warranty. We review the finished field with you, hand over the documentation, and register the work under the 730-Day Done Right Promise. If something shifts in that window, we make it right.
See the difference
Before
After
Before
After
Before
AfterTremron Products We Service & Install in Irvine
We cover Tremron Olde Towne pavers, the Plaza Series (Plaza I and Plaza II), the Stonegate brick paver line, and Mega Oldenburg large-format pavers. Olde Towne and Plaza come up most often on Irvine driveway and patio work, while Mega Oldenburg suits larger runs where fewer joints read cleaner. Stonegate shows up on walkways and patios where a brick profile fits the village architecture. We handle driveway and patio installation, full driveway replacement, and repair work on all of these lines, indoors, outdoors and along pool decks.
We Also Service These Brands
Tremron is the hardscape side of our work. On the interior side we install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler plumbing fixtures. That matters on Irvine jobs where a patio project runs alongside a kitchen or bath remodel. One contractor handles the scope from foundation to finish line, so you aren’t coordinating three trades and three schedules across one property.
FAQs – Tremron Construction Service in Irvine
No. We are an independent Tremron service provider and are not affiliated with, authorized by, or sponsored by the manufacturer. We install and repair Tremron products to the company’s published specifications and say so plainly. Call (888) 578-4462 for a free estimate if you’d rather talk it through.
Yes, we source genuine Tremron pavers in matching profiles and color families whenever they’re available. If the original series is discontinued or the lot is gone, we use a color-matched compatible paver and tell you before we order. Nothing gets substituted quietly.
Most repair work on a Tremron field is a one-visit job, often the same day for an isolated settlement or sand replacement. Full driveway or patio installation typically runs several days depending on square footage and base depth. We’ll give you a realistic schedule in writing before work starts, not an optimistic one.
We service and install Tremron Olde Towne, Plaza I and Plaza II, Stonegate and Mega Oldenburg pavers, plus repair work on older Tremron lines as long as matching material can be sourced. If you’re unsure what you have, send a photo and we’ll identify the profile.
Correct installation follows Tremron’s published specifications for base prep, edge restraint and joint sand, which is what keeps manufacturer coverage intact. Incorrect work, like a thin base or missing edge restraint, is what voids it. Our install meets those specs and our own 730-Day Done Right Promise covers the workmanship behind it.
Tremron projects in Irvine run from a few hundred dollars for a sealing refresh up to the high teens for a full paver driveway. The ranges below reflect local market pricing.
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Pricing is upfront: the number you see is the number you pay, with no change orders midway through. Projects over $10,000 get $1,000 off and 0% financing is available for 18 months. Call (888) 578-4462 for an exact quote. Estimates are free.
Book Your Tremron Service in Irvine, CA
Whether you’re fixing a rocking paver at the apron or putting in a new Tremron driveway or patio, we’ll walk the site, give you a straight answer on repair versus replacement, and put the price in writing. Irvine work gets HOA-ready documentation and the 730-Day Done Right Promise. Call (888) 578-4462 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Irvine.