Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterMetal Roofing in Irvine, CA
Metal roofing in Irvine, CA typically runs $18,000 to $42,000 for a full residential replacement, depending on square footage, panel style and whether the existing roof needs tear-off. Metal is the one roof type that handles Irvine’s particular combination of intense inland sun, marine-layer moisture in the mornings and dry Santa Ana wind events without the cyclical maintenance a shingle roof demands. We install standing seam and metal shingle systems from GAF and CertainTeed, and every installation is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. For an exact number on your home, call (888) 578-4462 and we’ll set up a free estimate.
This page sits under our full Roofing service, which covers the whole range of repairs and replacements we handle across Irvine.
Key Takeaways
- Metal roofing costs more up front than asphalt shingle, but in Irvine’s climate it typically outlasts shingle by decades.
- Standing seam panels are the best fit for Irvine homes with low-slope sections and big sun exposure.
- Most metal roof jobs we run take 2 to 5 days on site, weather permitting.
- Every metal roof we install carries our 730-Day Done Right Promise on workmanship.
- Pricing is upfront and locked in writing before the first panel comes off the truck.
When You Need Metal Roofing
Metal roofing isn’t a one-size call. Some Irvine homeowners come to us because their shingle roof is failing; others are planning a long-term upgrade because they’re tired of the replacement cycle. Here’s what usually signals it’s time to look at metal.
- Your shingle roof is on its second or third round of patches. If you’ve paid for repairs in Turtle Rock or Woodbridge two or three times in the last few years, you’re throwing money at a roof that’s already finished. Metal resets the clock instead of delaying the inevitable.
- You’re in a fire-zone or high-wind exposure area. Metal panels hold up far better than shingle in the dry, gusty Santa Ana wind conditions that push through Irvine each fall. Homeowners near the foothills and open-space edges often choose metal specifically for that reason.
- You’ve got a low-slope or complex roof geometry. Irvine has plenty of homes with shallow pitch sections and multiple plane changes. Standing seam metal handles those transitions cleanly where shingle struggles and ponding becomes a real risk.
- You’re tired of the color fading and granule loss. The inland Irvine sun bleaches and degrades asphalt shingle noticeably faster than coastal areas. Metal’s factory finish holds color far longer under that same exposure.
- You’re planning to stay in the home a long time. If this is your forever house, metal spreads its cost over a much longer service life and needs less ongoing maintenance than shingle.
- You want better energy performance. A reflective metal roof can reduce attic heat gain during Irvine’s long, hot summers, which matters on homes with west- or south-facing roof planes.
Our Metal Roofing Process
A metal roof is only as good as the deck and detailing beneath it. Here’s how we run a metal roofing project in Irvine, start to finish.
- Free estimate and roof assessment. We walk the roof, measure every plane, check the decking and flashing, and talk through panel styles and colors. You get an upfront, written number before anything is ordered.
- Material selection and confirmation. We size the job to your home and help you choose between standing seam and metal shingle systems from GAF or CertainTeed. Colors, gauge and trim are locked in writing.
- Tear-off and deck prep. We remove the old roofing, inspect the deck for rot or soft spots, and replace any compromised sheathing before the new system goes down. Skipping this step is how metal roofs fail early.
- Underlayment and flashing. We install a high-temperature underlayment rated for metal, plus new flashing at valleys, penetrations, chimneys and wall transitions. This is where water intrusion gets stopped, so we don’t rush it.
- Panel installation. Panels go down in sequence with proper fastening, alignment and concealed clip systems where the style calls for it. Edges, ridges and hips get the matching trim.
- Final walkthrough and cleanup. We do a magnet sweep for stray fasteners, walk the roof and gutters with you, and hand over the written 730-Day Done Right Promise.
Safety note: Metal roofing work on steep or multi-story sections involves real fall risk, and panel handling on a pitched roof is a two-person job at minimum. We don’t publish step-by-step instructions for this and don’t recommend homeowners attempt it – a trained, insured crew on the roof is the safe way to protect both you and your home. Our technicians have up to 12 years of experience, and every one of them is background-checked and arrives in uniform.
Why Irvine Homes Suit Metal
Irvine’s climate is unusual for Southern California. You get strong inland sun through summer, cool marine-layer mornings that leave dew and moisture on roof surfaces, and then dry, gusty fall wind events. That pattern punishes asphalt shingle – it oxidizes, dries out and loses granules faster than in a coastal or inland-desert climate. Metal roofs are engineered for exactly this: they shed moisture, reflect heat, and don’t lose a surface layer to sun and wind. Homeowners in older Irvine neighborhoods like Woodbridge and Northwood, where original roofs are reaching the end of their service life, are often the ones asking us about metal first.
Metal Roofing Pricing in Irvine
We price metal roofing with no-hassle upfront numbers: the number you see is the number you pay. Here are honest ranges for Irvine so you can plan before you call.
| Scope | Typical Price Range |
|---|---|
| Standing seam metal, standard-pitch home (2,000 – 2,500 sq ft) | $24,000 – $38,000 |
| Metal shingle system, comparable home | $18,000 – $28,000 |
| Complex or multi-plane roof, low-slope sections | $32,000 – $42,000+ |
| Tear-off of existing roofing | $2,500 – $5,500 |
| Deck repair or sheathing replacement | $800 – $4,000, by extent |
What moves the number most: total roof square footage, number of roof planes and valleys, panel style (standing seam costs more than metal shingle), whether the existing roof needs full tear-off versus a tear-off-and-replace-deck job, and flashing detail around skylights or chimneys. Two Irvine homes on the same street can land thousands apart if one has a simple gable and the other has dormers and a low-slope section.
We hold the line on pricing with 0% financing for 18 months and $1,000 off projects over $10,000, so a metal roof upgrade doesn’t have to be a cash-only decision. Book a free project estimate and design consult to get your real number.
Metal Roofing vs. Shingle: Which Makes Sense in Irvine?
Metal costs more up front – often $6,000 to $12,000 more than a comparable shingle replacement – but its service life is measured in decades, not a single cycle. In Irvine’s sun and wind, a shingle roof may need replacing well before the metal roof would. If you’re planning to stay, metal usually pencils out. If you’re planning to sell within a couple years and just need a solid roof, shingle can be the smarter call. We’ll tell you straight which one fits your situation rather than pushing the bigger ticket.
Either way, what sits underneath matters as much as the surface. Our work ties back to the same standard across every home improvement we take on: built to last, backed in writing.
How Long Does a Metal Roof Last in Irvine?
A properly installed metal roof typically lasts 40 to 50 years or more, and the finish is what wears first under Irvine’s sun. That’s a big part of why homeowners here ask about it: you’re not re-roofing again in 15 or 20 years. Shingle gives you one cycle in this climate; metal gives you the rest of your time in the house. The deck and flashing underneath determine whether it reaches that full life, which is why we don’t cut corners on underlayment and trim.
FAQs – Metal Roofing
How much does a metal roof cost in Irvine?
Metal roofing in Irvine typically costs $18,000 to $42,000 for a full residential replacement, with most standard homes landing in the $24,000 to $38,000 range for standing seam. The number depends on square footage, roof complexity and whether tear-off is needed. Call (888) 578-4462 for an exact quote – estimates are free.
Is metal roofing worth it compared to shingle in Irvine’s climate?
Yes, for most homeowners who plan to stay in the home. Metal handles Irvine’s sun, marine-layer moisture and dry wind events better than shingle and lasts decades longer, so the higher up-front cost spreads out over a much longer service life. If you’re selling soon, shingle may still be the better fit. A free estimate will tell you which way the math goes for your house.
Can you install a metal roof on my Irvine home’s existing roof?
Sometimes, but we usually recommend full tear-off. Metal installed over an old roof traps problems underneath and often shortens the metal’s life. Our crew assesses your deck and sheathing first and gives you an upfront price both ways so you can decide. Call (888) 578-4462 to schedule the assessment.
Do you offer a warranty on metal roofing?
Yes. Every metal roof we install is covered by our 730-Day Done Right Promise on workmanship – if it’s not done right, we make it right. That’s on top of the manufacturer warranty on the panels themselves. Calls are answered by a live person 24/7, so if anything comes up, you reach a real person, not a voicemail. Call (888) 578-4462 for a free estimate.
Book Your Metal Roofing Estimate
If you’re weighing a metal roof for your Irvine home, the fastest way to get a real number is to call. We’ll walk your roof, give you an upfront written estimate, and lay out your panel and color options with no pressure and no surprises. Call (888) 578-4462 for a free project estimate and design consult – a live person answers around the clock.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine.