Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterImpact Windows & Doors in Irvine, CA
Impact windows and doors in Irvine typically cost $1,900 to $4,800 per opening for the window, or $3,200 to $7,500 for a sliding glass or French impact door, and most single-opening swaps are finished in a day. They’re built with laminated glass and a reinforced frame that hold together in high wind and resist forced entry, which is why Irvine homeowners in fire-zone and wind-borne-debris areas reach for them. We install impact-rated products from Andersen and Marvin through our Windows & Doors service, and every job carries our 730-Day Done Right Promise. Call (888) 578-4462 and a real person picks up, any hour.
When You Need Impact Windows & Doors
Irvine sits in a county where Santa Ana winds can push 60 mph through the canyons and where the wildland-urban interface reaches right up to neighborhoods like Portola Springs and Orchard Hills. Impact glazing is a different animal from standard dual-pane. If any of these sound familiar, it’s time for a real conversation.
- You’re in a high-fire-severity zone. Homes along the foothills near Bommer Canyon and Turtle Rock face ember and radiant-heat exposure. Impact windows with laminated glass and a tight frame give you a defensible envelope when the wind turns.
- Your current windows rattle or flex in a Santa Ana. That play usually means single-pane or thin dual-pane glass that wasn’t rated for pressure. Impact units are tested to specific design pressures, so they hold shape instead of bowing.
- You want forced-entry resistance, not just weather resistance. Laminated impact glass stays in the frame when struck. On ground-floor sliders and entry doors around Woodbridge and Northwood, that changes the security math.
- Your insurance carrier is asking about wind mitigation. Some Irvine policies discount premiums for impact-rated openings. Worth asking your carrier before you buy.
- You’re remodeling and want to fix the envelope once. If you’re already replacing siding or stucco, upgrading to impact glazing in the same pass saves the labor of tearing in twice.
- Street noise is bleeding in. Laminated glass cuts traffic and freeway drone from the 5 and 405 corridors noticeably compared with standard insulated units.
Our Impact Windows & Doors Process
We don’t hand you a catalog and wish you luck. Here’s how an impact project actually runs with us, start to finish.
- Free estimate and design consult. We measure every opening, note the existing framing and stucco detail, and talk through glass packages, frame colors, and hardware. You get a written, upfront price with no line-item surprises. That consult is free, and it comes with our standing offer of $1,000 off projects over $10,000.
- Product selection. You pick from our curated brand partners. Most Irvine homeowners land on Andersen or Marvin for impact-rated lines because the finish options match the Mediterranean and contemporary facades common here. We spec the design pressure to your exposure, not a generic number.
- Permitting. Irvine requires permits for window and door replacement, and impact products come with product approval documentation the city wants on file. We handle the submittal and the inspection scheduling so you’re not chasing paperwork.
- Installation day. Background-checked, uniformed technicians arrive with the products, protect your floors and landscaping, and set each unit with proper flashing and sealant detailing. Most single openings are done in a day; a whole-house package runs several days.
- Final walkthrough. We operate every window and door with you, check the locks and screens, and confirm the seal. Then we hand over the warranty paperwork, all of it backed by our 730-Day Done Right Promise.
One note on safety: impact products are heavy and the glazing is unforgiving. We don’t recommend homeowner installation on anything above ground-floor, and we won’t talk you through a second-story swap over the phone. That’s a job for trained crews with the right lifting gear.
Impact Windows & Doors Pricing in Irvine
Impact glazing costs more than standard windows because the glass, frame, and testing are a step up. Here’s an honest line-item range for the Irvine market. These are typical installed prices, not teaser numbers, and your exact figure depends on size, product line, and how many openings you’re doing.
| Item | Typical Installed Range |
|---|---|
| Single impact window (standard size) | $1,900 – $3,400 |
| Large impact window / picture window | $2,800 – $4,800 |
| Impact sliding glass door | $3,200 – $6,200 |
| Impact French or entry door | $4,000 – $7,500 |
| Whole-house impact package (12-18 openings) | $28,000 – $65,000 |
| Permit and inspection fees | Varies by scope; quoted upfront |
What moves the number: frame material (vinyl vs. aluminum-clad wood), glass thickness and interlayer, design pressure rating, second-story access, and whether existing stucco or trim needs repair around the opening. A straight swap costs less than one that requires reframing. We quote all of it upfront so the number you see is the number you pay.
Large packages qualify for our $1,000 off projects over $10,000, and we offer 0% financing for 18 months so a whole-house upgrade doesn’t have to come out of savings in one shot. Call (888) 578-4462 for a free estimate and a written price.
Why Irvine Homeowners Choose Us for Impact Work
Impact products are only as good as the installation around them. A perfectly rated window set into sloppy flashing leaks in the first rain. Our technicians have up to 12 years of experience, and the crews are background-checked and arrive in uniform, not in an unmarked van. We pair that with brand partners you’ll recognize across our trades, from Andersen and Marvin for windows to GAF and CertainTeed on the roofing side, so the envelope gets handled by one accountable contractor from foundation to finish line.
Everything we install is backed in writing by the 730-Day Done Right Promise. If it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it applies to the flashing and sealing detail, not just the product.
Want to see how this fits with the rest of your exterior work? Start with our home page, or check what we cover across the Irvine service area.
FAQs – Impact Windows & Doors
How much do impact windows cost in Irvine?
Impact windows in Irvine run about $1,900 to $3,400 installed for a standard single window and $2,800 to $4,800 for large or picture units, with whole-house packages typically landing between $28,000 and $65,000. The biggest drivers are frame material, glass thickness, second-story access, and stucco or trim repair around each opening. Call (888) 578-4462 for an exact quote, and the estimate is free.
Do I need a permit for impact windows in Irvine?
Yes. Irvine requires permits for window and door replacement, and impact-rated products need their product approval documentation on file with the city. We pull the permit and schedule the inspection for you as part of the job, so you’re not navigating the city counter yourself. Call (888) 578-4462 and we’ll walk you through what your specific project needs.
How long does an impact window installation take?
Most single openings are completed in one day, and a whole-house package of 12 to 18 openings usually takes several days depending on access and trim work. We schedule around your household and keep the work area contained each day. Call (888) 578-4462 to get a realistic timeline for your home.
Will impact windows lower my insurance premium in Irvine?
Some Irvine carriers offer wind-mitigation discounts for impact-rated openings, though the amount varies by policy. Ask your carrier directly before you buy. We provide the product documentation you’ll need to submit. Call (888) 578-4462 and we’ll point you to the right specs for your insurer.
Is it cheaper to repair or replace my windows?
If the frame and glazing are sound and only a seal or sash has failed, repair is cheaper. But once the glass is delaminating, the frame is warped, or you’re chasing pressure rating for wind or fire exposure, replacement is the better spend. Impact upgrades in particular can’t be retrofitted into standard frames. Call (888) 578-4462 and we’ll tell you straight which one you’re looking at.
Get Your Free Impact Estimate
Impact windows and doors are a long-horizon investment, and the wrong installer turns a good product into a leak. We answer the phone with a live person 24/7, quote upfront with no surprises, and back the work with the 730-Day Done Right Promise. Call (888) 578-4462 for a free estimate and design consult on your Irvine impact window or door project.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine.