Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWood Fence in Irvine, CA
A wood fence in Irvine, CA typically costs between $3,200 and $7,800 for a standard residential lot, and most installations are completed in one to three days. Wood fencing is the most requested privacy and boundary solution in Irvine, and for good reason: it handles the heat, blends with the city’s ranch and Mediterranean architecture, and can be built to the exact height and style your HOA or property line requires. Groundwork Construction Co. of Irvine installs wood fencing with the same standards we bring to Fence Installation across Orange County, backed by our 730-Day Done Right Promise and upfront pricing that doesn’t change after the work starts. Call us at (888) 578-4462 for a free estimate.
Irvine is a city of planned communities, and that shapes how wood fences actually get built here. Villages like Woodbridge and Northpark have architectural review requirements. Lots in Turtle Rock sit on slopes that need stepped framing. And the Santa Ana winds that push through the canyon corridors every fall test every post and rail we fasten. We know those conditions because we work in them, not because we read a climate report.
Key Takeaways
- Wood fence installation in Irvine runs $3,200-$7,800 for most residential lots, depending on linear footage, height, and material grade.
- Most Irvine installations are completed in one to three days.
- Cedar and pressure-treated pine are the two most common choices for Irvine’s climate and HOA rules.
- We offer 0% financing for 18 months and $1,000 off projects over $10,000.
- Every job is covered by the 730-Day Done Right Promise.
- Technicians on our installs have up to 12 years of experience.
When You Need Wood Fence
Wood fence problems usually announce themselves clearly. Here are the situations Irvine homeowners call us about most:
- Posts are leaning or rotting at the base. In Irvine, sprinkler systems running too close to fence lines are a common cause. Pressure-treated posts will still rot if they sit in saturated soil year after year. If two or more posts in a run are loose, the whole section needs attention before a windstorm takes it down.
- Fence boards are warping after summer heat. Inland Irvine neighborhoods like Northwood and Westpark see afternoon temperatures that can push above 95 degrees in July and August. Pine boards that weren’t properly sealed and spaced warp, cup, and pull away from the rails. Cedar handles that swing better than pine if you plan to skip resealing for a few years.
- You’re adding a pool and need code-compliant barriers. Irvine follows California pool safety requirements, which means fencing around a pool needs to meet specific height, gap, and self-latching gate rules. We build to those standards and can walk your plan through the inspection process.
- Your HOA flagged your fence color or height. Woodbridge, Northpark, and several other Irvine villages have architectural review committees with specific fence guidelines. If you’ve received a notice, we can help you understand what’s approved and build to it.
- You’re replacing a shared fence with a neighbor. Irvine properties share a lot of fence line. When the fence sits on the property line, we can help sort out shared cost arrangements and document the work so there’s no confusion later.
- You need privacy screening along a busy road or greenbelt. Homes backing up to Irvine’s greenbelts and trails often have foot traffic their fences were never designed to block. A properly built 6-foot wood privacy fence solves that without breaking HOA height rules.
Our Wood Fence Process
Here’s how a wood fence project works when you hire Groundwork Construction Co. of Irvine:
- Free on-site estimate and design consult. We walk the fence line with you, measure linear footage, note slope changes, and talk through material options. You get a written price before any work begins. That’s our no-hassle upfront pricing promise – the number you see is the number you pay.
- HOA and permit review. If your Irvine village requires architectural approval, we help you understand the requirements. We’ll also check whether your project needs a city permit based on height and lot line placement.
- Utility locating and marking. Before a single post goes in the ground, we call for utility locating so we don’t hit irrigation lines, gas lines, or buried electrical. This step is non-negotiable on every job.
- Removal and site prep. We tear out the old fence, haul away the debris, and set the line for the new installation. If the old footings are reusable, we tell you and credit the savings.
- Post setting and frame assembly. Posts go in at the correct depth for Irvine soil conditions, set in concrete, and plumb-checked. Rails and boards follow once the posts cure.
- Walkthrough and gate check. We walk the finished fence with you, check every gate swing, confirm the height and sightlines, and hand over care instructions. Anything wrong gets fixed on the spot.
Calls to our office are answered by a live person 24/7, so if a question comes up while we’re building, you’re not waiting in a voicemail queue.
Wood Fence Pricing in Irvine
Wood fence pricing in Irvine depends on linear footage, height, material, terrain, and whether you’re removing an old fence. Here are realistic ranges for the Irvine market:
| Item | Typical Range |
|---|---|
| Wood fence installation (standard 6-foot, per linear foot) | $45-$85 |
| Full fence replacement, average Irvine lot (150-180 linear feet) | $3,200-$7,800 |
| Old fence removal and haul-away | $350-$850 |
| Gates (single, 36-inch to 48-inch) | $650-$1,400 |
| Slope stepping (per stepped section) | $120-$300 |
| Stain and seal (applied after install or as separate service) | $900-$2,200 |
What Drives the Price
- Material: Cedar runs higher than pressure-treated pine but needs less maintenance in Irvine’s climate. Western red cedar is the premium choice for homeowners who want the fence to last 15-20 years before replacement.
- Height: A 6-foot fence uses more board and more post depth than a 4-foot fence. Above 6 feet often requires city permits and engineer review.
- Slope: Turtle Rock and Shady Canyon properties often have significant grade changes along the fence line. Each stepped section adds labor and materials.
- HOA requirements: Some villages require specific styles, colors, or materials. Matching those specs can add cost, but it’s the only way to get approval.
- Access: Tight side yards, pool cages, or fences built against retaining walls make installation slower.
We offer 0% financing for 18 months and $1,000 off projects over $10,000, which brings larger fence replacements within easy reach. If you’re also considering a complete exterior refresh, our Fence Installation in Irvine page covers the full scope we handle.
Note on fencing materials: Groundwork partners with top-tier brands across every service category – from KraftMaid and Cambria in kitchens to GAF and Owens Corning on roofs. For fencing, we source lumber and hardware from trusted suppliers and can walk you through material comparisons when we’re on site.
Alternative Fence Options for Irvine Homeowners
Wood isn’t the only choice, and it isn’t always the right one. Some Irvine neighborhoods and lot types call for something different:
- Vinyl: Lower maintenance, but higher upfront cost and less flexibility for custom heights. Popular in new-build communities with strict design guidelines.
- Composite: Costly, but holds up against heat and moisture better than wood. A strong pick for homeowners who plan to stay in the home 10+ years and want to skip the staining cycle.
- Wrought iron: Common for greenbelt-facing lots and pool enclosures. Pairs well with short wood or masonry sections.
- Chain link: Functional and affordable, but rarely allowed in Irvine’s master-planned communities.
We’ll tell you honestly which option fits your property, your HOA, and your budget. If wood is the right answer, we build it well. If it isn’t, we’ll say so.
FAQs – Wood Fence
How much does a wood fence cost in Irvine, CA?
A standard 6-foot wood fence in Irvine typically costs $3,200-$7,800 for a full residential lot, or $45-$85 per linear foot. Cedar runs higher than pressure-treated pine, and slope, HOA requirements, and old fence removal can add to the total. Call (888) 578-4462 for a free estimate – we’ll give you a number in writing before any work starts.
How long does wood fence installation take in Irvine?
Most Irvine wood fence installations are completed in one to three days. A typical 150-foot residential run takes two days including removal of the old fence. Complex lots with slope, tight access, or multiple gates can run longer. We’ll give you a realistic timeline in your written estimate so there are no surprises.
Should I choose cedar or pressure-treated pine for my Irvine fence?
Cedar is the better long-term choice in Irvine’s climate because it resists heat warping and moisture rot without chemical treatment, and it can go 15-20 years before replacement. Pressure-treated pine costs less upfront but needs staining every two to three years and typically lasts 10-12 years. For homeowners backing up to greenbelts or sitting on west-facing slopes, cedar pays for itself over time.
Can you install a wood fence that matches Irvine HOA requirements?
Yes. We work with Irvine HOA architectural review requirements routinely, including villages like Woodbridge, Northpark, and Westpark. We’ll review your HOA’s fence guidelines before we install, confirm the approved height, color, and style, and build to those specs so your fence passes inspection the first time. If you’ve been flagged by your HOA, call us and we’ll help sort out what’s needed.
How deep should fence posts go in Irvine soil?
Irvine soil varies from sandy loam in coastal-influenced areas to clay-heavy soil in inland villages. Posts should go at least 24 inches deep for a standard 6-foot fence, deeper for taller fences or when the soil is loose. Setting posts in concrete at the right depth is what keeps a fence standing through Santa Ana wind events. We don’t cut corners on post depth – it’s the difference between a fence that lasts and one that leans after the first storm season.
What does the 730-Day Done Right Promise cover?
Our 730-Day Done Right Promise covers workmanship on every project we build, including wood fencing. If something we installed fails within 730 days due to workmanship, we make it right at no cost to you. That’s one of the longest workmanship guarantees in the residential construction space, and it’s in writing.
If you’re ready to talk through a wood fence project, whether it’s a full replacement or a single section that just took a hit from last year’s windstorm, call Groundwork Construction Co. of Irvine at (888) 578-4462. We’ll answer live, book a free on-site estimate, and give you an honest price in writing. Wood fencing is one of seven core services we handle, from fence installs to home remodels, so you’re working with a contractor who can handle the whole project if it grows. We answer calls 24/7, our technicians are background-checked and arrive in uniform, and every job is backed by the 730-Day Done Right Promise. Let’s build a fence that stands up to Irvine weather and looks right doing it.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine.