A Groundwork company - serving Irvine, CA

KraftMaid Windows & Doors in Irvine, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

KraftMaid Windows & Doors: The Irvine Owner’s Guide

KraftMaid-compatible windows and doors for Irvine homes run $4,500-$15,000 for a standard replacement package or $8,000-$25,000 for impact-rated units, and the part itself (sash, hardware, weatherstripping, or door slab) is usually the smallest line on the estimate. We source the correct KraftMaid part, confirm fit against your model, and install it with upfront pricing, no surprises. Most jobs complete in a single visit. Groundwork Construction Co. of Irvine is an independent service provider and is not affiliated with KraftMaid.

Call (888) 578-4462

Owners in Irvine usually discover the failure the same way: a door that won’t sit flush in July, a sash that fogs between the panes after a Santa Ana wind event, or a threshold that starts weeping water onto the tile in Quail Hill. The part was fine for years. Then it wasn’t.

Which KraftMaid Models This Applies To

KraftMaid builds windows and doors across a few series, and the part numbers do not cross between them. Before we quote anything, we pull the label from the jamb or the door edge, match the series and the rough opening, and confirm the hardware style. That five-minute step is where most online part orders go wrong.

Here’s the gotcha most Irvine homeowners miss: KraftMaid’s replacement sashes and door slabs are sized to the original frame, not to a universal nominal size. A “36-inch door” from a big-box store is not the same as a KraftMaid 36-inch door frame, and the difference shows up as a 1/4-inch gap you’ll feel every time the wind blows. Measure the rough opening, not the visible door. And check the stamped label on the hinge jamb – it carries the series code that tells us which replacement hardware kit actually fits.

OEM versus aftermarket for KraftMaid specifically: OEM hardware matches the finish and warranty chain exactly. Quality aftermarket equivalents are a reasonable call for weatherstripping, sweeps, and rollers, which wear out on rotation anyway. For structural parts on the sash or the door slab itself, OEM is the safer path. We’ll tell you which is which on your specific unit. We also service Cambria, Silestone, and Kohler products on the interior side of the same homes.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your KraftMaid Windows & Doors Is Failing

  • Fogging between the glass panes. The sealed unit’s desiccant has given out. Irvine’s inland heat cycling accelerates this – a west-facing window here sees wider daily temperature swings than coastal Orange County, and the seal fails years earlier than the manufacturer’s rating suggests.
  • Door dragging or not latching. Usually the hinge screws have pulled or the slab has swelled. In Irvine’s dry summers, wood slabs shrink and reveal gaps; in winter humidity they swell and bind. The part is telling you the adjustment window has closed.
  • Draft at the threshold or around the frame. Weatherstripping and door sweeps are the first parts to fail. They compress permanently after a few years and stop sealing, which shows up as higher cooling bills in June through September.
  • Water staining or soft wood at the sill. The sill pan or the weather seal has failed and water is getting behind the frame. Catch this early; ignored sill rot is the difference between a part swap and a frame replacement.
  • Hardware that won’t operate smoothly. Handles, locks, and multi-point mechanisms wear out and eventually bind. A sticky handle today is a stuck door in a year, and stuck doors become security concerns rather than inconveniences.

Replacement Cost & What’s Included

For Irvine, here’s what the numbers actually look like. Window replacement runs $4,500-$15,000 installed for a typical package. Impact window installation runs $8,000-$25,000 – higher because the glass and frame assembly has to meet impact standards and Irvine homes in fire-adjacent zones often add requirements. Door replacements fall inside the window range depending on slab or frame scope.

What drives the range: number of openings, series and glass package, whether the frame is sound or needs replacement, and impact versus standard rating. Every quote we write is line-item and upfront. The number you see is the number you pay, backed by the 730-Day Done Right Promise. If it’s not done right, we make it right.

Scope Installed Range
Window replacement (standard) $4,500-$15,000
Impact window installation $8,000-$25,000
Single sash or door part swap Quoted per unit – call for exact pricing
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely check a few things yourself. Run your hand around the frame on a windy day to feel for drafts. Look at the sill after rain for standing water or staining. Open and close the unit slowly and note where it binds. Photograph the label on the jamb.

Where DIY goes wrong: replacing a sash or door slab requires matching the rough opening precisely, and a mis-sized part means a return, a delay, and often a frame that’s now out of square. Adjusting multi-point hardware without the right spec strips the mechanism. And any work above the first floor involves ladder or scaffold risk that isn’t worth taking on a weekend. Call (888) 578-4462 and we’ll tell you straight whether it’s a part swap or a bigger scope. Estimates are free.

FAQs

Get Your KraftMaid Part Matched and Installed

Bring us the label and the symptom, and we’ll write you a line-item quote with upfront pricing, no surprises. Calls are answered by a live person, 24/7 – no voicemail, no waiting until Monday. For projects over $10,000, we offer $1,000 off, plus 0% financing for 18 months. Call (888) 578-4462 today for a free estimate. Built to last, backed in writing.

Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch