Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Windows & Doors: The Irvine Owner’s Guide
We install Wellborn-compatible windows and doors for Irvine homeowners, with most window replacement projects running $4,500 – $15,000 installed and impact-rated units at $8,000 – $25,000 depending on count and glass package. We’re an independent service provider, not affiliated with Wellborn – we source the correct part for your model and install it to spec. Owners usually discover a Wellborn window or door has failed the same way: a foggy double-pane, a sash that won’t slide, or a door that sticks every summer as Irvine’s inland heat pushes the frame out of square.
Key Takeaways
- Most Wellborn window replacements in Irvine land between $4,500 and $15,000 installed.
- Fogged glass means the sealed unit failed first – not the frame.
- Model and series are stamped on the sash or the glass spacer; we match to that, not to the year of your house.
- Every install is covered by our 730-Day Done Right Promise.
Which Wellborn Models This Applies To
Wellborn has built windows across several product lines, and the part that fits depends on the series, not the model year of your home. Before we order anything, we read the manufacturer label – usually a silver or white sticker on the top or side of the sash, or etched into the glass spacer on newer units. That label carries the series, the size, and the glass package, which is what actually determines whether a replacement sash or sealed unit will seat correctly.
A compatibility gotcha we run into regularly in Irvine: Wellborn frames from the same series can have different sill depths depending on the glazing option, so a sash pulled from a “matching” series may not seal against your sill. Measure the visible glass, the frame opening, and the sill depth before you order. On the OEM-versus-aftermarket call, OEM glass is the safe match when the sash and frame are still sound. When the frame has warped or the series is discontinued, a quality aftermarket unit from a line we carry – Andersen or Pella, for example – often fits the rough opening and costs less than chasing a discontinued OEM sash.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Windows & Doors Is Failing
Windows and doors rarely fail all at once. They telegraph it. Here’s what we hear from Irvine homeowners and what sits behind each symptom:
- Fog or condensation between the panes. The sealed glass unit’s desiccant has saturated and the seal is gone. The frame is usually fine; the glass pack is what needs replacing.
- A draft or a whistle along the frame edge. Weatherstripping has flattened or the sealant bead has cracked. In Irvine’s dry inland air, sealant under window trim dries and shrinks faster than on the coast.
- The sash sticks or won’t slide. Debris in the track, a worn roller, or a frame that has moved slightly out of square. On sliders, it’s almost always the roller or the track, not the whole unit.
- A door that rubs the jamb in summer. Wood and vinyl frames expand in Irvine’s heat and contract overnight. Persistent rubbing points to a settling frame or a hinge that’s out of adjustment.
- Water staining at the interior sill. The exterior seal or flashing has failed and water is getting behind the frame. Left alone, this reaches the wall framing, not just the window.
Replacement Cost & What’s Included
Replacement cost in Irvine tracks two things: the number of units and the glass package. Standard window replacement runs $4,500 – $15,000 installed. If you’re stepping up to impact-rated glass, budget $8,000 – $25,000 depending on count and rating. A single hard-to-match sash or sealed unit sits at the low end when the frame is sound; a full-frame swap with trim repair pushes toward the top.
Our quotes are line-item and upfront – the number you see is the number you pay. What’s included:
- On-site measurement and label verification against your Wellborn series
- The replacement unit or glass pack, matched to your opening
- Removal and disposal of the old unit
- Installation, sealing, and trim touch-up
- Our 730-Day Done Right Promise on the workmanship
We also install lines from other trusted partners if your Wellborn series is discontinued – KraftMaid, Cambria, and Silestone are among the brands we work with across other trades. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There’s a real split here. You can safely check the label, measure your opening, clean the tracks, and confirm whether the fog is between the panes or on the room-side surface. You can swap a worn roller or re-caulk a dried bead. Those are sensible first steps.
Where DIY goes wrong: replacing a sealed glass unit or a full sash yourself. The glass pack is heavy, the seal has to be exact or it fogs again within a season, and on upper-floor units in Irvine’s two-story homes the fall risk is real. A frame that’s out of square is a carpentry and flashing job, not a weekend project. That’s the point where a trained installer earns the call. When you’re ready, call (888) 578-4462 – we answer live, and the estimate is free.
FAQs
Wellborn windows typically last 15 – 25 years, with the sealed glass unit usually the first thing to go – often around the 10 – 15 year mark in Irvine’s heat. The frame itself often outlasts two glass packs. If the frame is solid, replacing the glass is far cheaper than a full swap.
Often, yes. Fogged glass gets a new sealed unit, sticking sliders get new rollers, and drafty frames get fresh weatherstripping and sealant – all without replacing the whole window. We tell you honestly whether repair or replacement makes more sense once we’ve seen the unit. Call (888) 578-4462 for a free assessment.
A single sash or sealed unit is typically a same-day install. A full window or door replacement is usually one to two days depending on count and trim work. We give you a firm timeline in the written quote, not a “sometime this week” guess.
We read your Wellborn label, confirm the series and size, then order the matching unit or glass pack from a supplier we trust. If the series is discontinued, we identify a quality equivalent that fits your rough opening. No parts are carried on a truck – every unit is ordered to your opening.
Get Your Free Wellborn Windows & Doors Estimate in Irvine
If a Wellborn window is fogged, a door is sticking, or you’re not sure whether it’s the glass or the frame, call (888) 578-4462 to schedule your free estimate. We answer live around the clock, we show up in uniform, and every job is backed by our 730-Day Done Right Promise – built to last, backed in writing. Our technicians have up to 12 years of experience, and our pricing is upfront from the first call.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.