A Groundwork company - serving Irvine, CA

Silestone Kitchen Remodeling in Irvine, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Silestone Kitchen Remodeling: The Irvine Owner’s Guide

Installing or replacing Silestone surfaces in an Irvine kitchen typically runs $14,000 to $45,000 for a full remodel, or $2,000 to $6,500 for countertop installation on its own. That covers templating, fabrication, tear-out of the old surface, and setting the new slab on your existing or new cabinets. Most Irvine homeowners reach this page after a quartz surface has started to fail in a specific way: a chip at the sink edge, a seam that’s turning dark, or a hairline crack radiating from an overhang that wasn’t supported. Groundwork Construction Co. of Irvine handles the full kitchen scope around a Silestone surface, and we answer the phone with a live person 24/7 so you’re not waiting until Monday to get a real answer about what’s wrong.

Call (888) 578-4462

Which Silestone Models This Applies To

Silestone is engineered quartz, and most of what fails in an Irvine kitchen isn’t the material itself – it’s how it was installed. The line has run through several named color series over the years (Eternal, Miami Vena, Calacatta Gold and dozens of others), and every one of them is a slab product, not a parts-bin item. There’s no serial number to match. What matters is slab thickness and format.

Standard Silestone comes in 2 cm and 3 cm thickness, with jumbo slabs measuring roughly 63″ x 128″. That difference is the compatibility gotcha most homeowners miss: a builder-grade 2 cm slab on a peninsula needs a plywood subtop or steel support, and if yours was set directly over open cabinets with no support, a crack is not a manufacturing defect – it’s a structural one. Repairs have to account for what’s underneath, not just the surface.

To identify what you have, look at the underside of an overhang or inside a sink cabinet. You’ll usually find a fabricator sticker with the color name and slab dimensions. If that sticker is gone, a fabricator can identify the color from a remnant, and we can match it against current Silestone series or a close equivalent. We work from original Silestone slabs and compatible engineered quartz; this is not a market where aftermarket “drop-in” panels exist, so a mismatch in color, veining or thickness is the real risk, not a counterfeit part.

Groundwork Construction Co. of Irvine is an independent service provider and not affiliated with Silestone or its manufacturer. We also handle KraftMaid cabinetry, Cambria quartz, and Kohler fixtures when a kitchen calls for a different brand mix.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Silestone Kitchen Remodeling Is Failing

  • A crack starting at a seam or an overhang. Engineered quartz is strong in compression but doesn’t flex like natural stone. Cracks almost always start at an unsupported overhang over 12″ or at a poorly bonded seam, and in Irvine’s dry inland climate the seasonal expansion and contraction along a south-facing window wall will widen that crack over a couple of years.
  • Dark or discolored seams. The epoxy seam adhesive breaks down from moisture and heat cycling. A seam turning gray or black means water has been getting in at the edge of the sink or the backsplash joint, not that the quartz has stained.
  • Chips at the sink or cooktop cutout. Cutouts are the thinnest, weakest part of any slab. Chips there usually trace back to a cutout edge left unpolished or a dishwasher beneath it venting heat directly into the stone.
  • Visible rings or heat marks near the range. Quartz resin is heat-sensitive around 300°F. A hot pan set down directly will leave a permanent dull ring, and repeated exposure can craze the surface in a way that no polish will fix.
  • Rocking or a hollow sound when you tap the counter. That’s a bonding failure between slab and cabinet, most often on an island where the substrate wasn’t shimmed level. Left alone, the slab flexes every time someone leans on it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what kitchen work around a Silestone surface actually costs in Irvine, with parts and labor together:

Scope Installed Range (Irvine)
Full kitchen remodel $14,000 – $45,000
Countertop installation $2,000 – $6,500
Cabinet installation $4,000 – $13,000
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000
Small kitchen remodel $9,000 – $20,000

What moves you up or down that range: slab selection (a premium veined series costs more than a solid color), the number of cutouts and edge profiles, whether the cabinets below are staying or coming out, and whether a peninsula needs structural support added. A countertop-only swap at the low end assumes existing cabinets are sound and plumbing rough-in stays put.

Every project gets a written line-item quote before work starts, with upfront pricing so the number you see is the number you pay. No change orders unless you change the scope. The work is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. Projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months is available. Call (888) 578-4462 for a free estimate and design consult.

DIY or Call Us?

There’s a short list of things you can safely check yourself. Confirm the slab thickness and substrate by looking under an overhang. Snap a photo of the fabricator sticker. Note whether the crack opens and closes with temperature. Wipe a seam dry and watch whether it darkens again after a day. Those observations help us price the job accurately over the phone.

What you shouldn’t attempt: cutting, bonding or polishing quartz in place. A Silestone slab weighs upward of 300 pounds for a standard counter run, and a two-person lift with no mechanical support is how people get hurt and how a $6,000 slab becomes a pile of rubble in a garage. Seam epoxy and edge polishing also need tools and technique most homeowners don’t have, and a bad seam is worse than the one you started with. Working on a live electrical circuit near a cooktop is a separate risk entirely.

We’re happy to tell you honestly whether your counter needs a repair or a full replacement – and if it’s a repair, we’ll say so. Call (888) 578-4462.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch