A Groundwork company - serving Irvine, CA
K

Kohler Kitchen Remodeling in Irvine, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Kohler Kitchen Remodeling: The Irvine Owner’s Guide

We install Kohler fixtures, sinks, faucets, and Kohler-compatible cabinetry and stone in full kitchen remodels across Irvine, with most complete kitchen projects landing between $14,000 and $45,000 installed. If you’re here because a single Kohler part is failing, you usually don’t need a full remodel to fix it: we can match the part to your exact model, install it, and price the job in writing before anyone picks up a tool. Most Irvine homeowners discover the problem the same way, a faucet that drips a few times a day and then won’t stop, a sprayer that won’t fully shut off, a pull-down head that won’t seat back in its dock, or a soap dispenser that’s stopped drawing at all. Kohler’s ceramic disc cartridges are dependable, but in Irvine’s hard water they rarely fail suddenly. They wear down by degrees.

Call (888) 578-4462

Which Kohler Models This Applies To

Kohler’s kitchen lineup splits into rough-in families, and that split is where most part mismatches happen. The Belfield, Bellera, and Crue lines use one ceramic cartridge family with different finishes; the Artifacts and Tournant pull-down lines use a different cartridge and head assembly. A Crue pull-down head will not seat on an Artifacts dock, even though the two look similar in the box. Before you order anything, find the model number stamped on the faucet body under the base flange or on the tag inside the cabinet under the sink. On kitchen sinks, the tell is the drain opening size: most Kohler kitchen sinks use a standard 3.5-inch drain opening, but the Kraus-style workstation and farmhouse models sometimes run a deeper drain collar, so a generic basket strainer can sit too high. On the OEM-versus-aftermarket call, we go OEM on cartridges and head assemblies, because aftermarket ceramic discs often run short by a millimeter or two and start seeping within a year. For handles, aerators, and sprayers we’ll often spec a quality equivalent. We don’t claim to stock any of these; we source the correct part to your model and install it. We also service KraftMaid, Cambria, and Silestone if your kitchen project pulls the cabinetry and stone into the same job.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Kohler Kitchen Remodeling Is Failing

  • A steady drip from the spout that won’t stop. That’s the ceramic cartridge losing its seat. In Irvine, mineral buildup on the disc edges accelerates the wear, and a drip that’s one drop a minute becomes a steady stream within a few months.
  • The handle turns stiff or feels gritty. The cartridge’s internal O-rings are dry or mineral-scarred, and turning the handle harder will eventually crack the stem. It’s a sign the cartridge needs replacing before it fails completely.
  • The pull-down head won’t stay in its dock. The hose weight on the supply line has slipped or the head’s magnet has weakened. The fix is a weight reposition or a new head, not the whole faucet.
  • Water runs from the base of the faucet onto the counter. The base O-ring or the cartridge housing has failed, and this one usually means the cartridge and O-ring need replacing together. Left alone, it can seep under the counter and damage the sink cabinet floor.
  • The sprayer or soap dispenser won’t fully shut off. The internal seal or check valve on the diverter has failed. A drip is a nuisance now, but a failed seal on a sprayer can wet the back of the cabinet until it’s warped.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Irvine, replacing a Kohler faucet cartridge or head assembly typically runs $180 to $340 installed, including the part and labor. A full Kohler kitchen faucet replacement installed is usually $320 to $650, and a Kohler sink or drain assembly install lands around $220 to $480. A complete Irvine kitchen remodel that pulls in Kohler fixtures with new cabinetry and stone runs $14,000 to $45,000, and a small kitchen refresh is $9,000 to $20,000. The range is driven by which part fails, whether the faucet body is still in production, and whether the rough-in needs any adjustment. We quote with line-item parts and labor, so you see the part price separate from the install. No surprises on the invoice. The work is backed by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction, and every Kohler install is priced upfront before we start.

DIY or Call Us?

You can safely do the checks: find the model number on the faucet body, confirm the sink drain opening size, and look for water staining under the sink cabinet. That’s information gathering, not repair. Where DIY goes wrong on a Kohler faucet is the cartridge itself: the retaining nut is often seized, and forcing it with an adjustable wrench can twist the supply line or crack the faucet body, which turns a $180 repair into a full faucet replacement. On a pull-down head, the trap and the supply lines are under pressure, and a wrong-size O-ring will leak silently behind the cabinet until the cabinet floor warps. If you’re not comfortable shutting off the angle stop under the sink, don’t touch it. Call (888) 578-4462 and we’ll send a background-checked, uniformed technician, price the job upfront, and get the right Kohler part installed. A live person answers, 24/7.

FAQs

How long should a Kohler kitchen faucet cartridge last? Most Kohler ceramic cartridges last 10 to 15 years with normal use, but in Irvine’s hard water you can expect closer to 8 to 12 years before the cartridge loses its seat. Calcium and magnesium deposits wear the ceramic disc edges faster here than in softer-water regions. If your faucet is past that window and dripping, replacing the cartridge is cheaper than waiting for a full failure. Call (888) 578-4462 for an exact quote, estimates are free.

Can a Kohler faucet be repaired instead of replaced? Yes, most single-handle Kohler kitchen faucets can be repaired with a new cartridge and O-rings rather than a full replacement. The faucet body and spout are usually still fine even when the cartridge has failed. We check the body, the supply connections, and the diverter before quoting, and if a rebuild makes more sense than a replacement, we’ll tell you. Call (888) 578-4462 to schedule the free estimate.

How long does a Kohler part swap take? A cartridge or head assembly swap usually takes 45 minutes to 90 minutes on site, and most of our Irvine jobs finish in a single visit. A full faucet replacement with a new Kohler model runs about 1 to 2 hours, depending on whether the supply lines need replacing. We’ll tell you the expected time in writing before we start. Call (888) 578-4462 for a free quote.

How do you source the Kohler part? We match the part number to your faucet’s model code and order the OEM cartridge or assembly from Kohler’s distribution, or spec a quality aftermarket equivalent only when you approve it. We don’t claim to stock parts, and we don’t carry a parts truck. We order to the model, install it, and back the work with the 730-Day Done Right Promise. Call (888) 578-4462 to get your free estimate started.

When a Kohler part fails, you don’t need to guess your way through a parts order or gamble on a generic equivalent that starts seeping in a year. Groundwork Construction Co. of Irvine matches the part to your model, quotes the job upfront with line-item pricing, and stands behind the install with our 730-Day Done Right Promise. Call (888) 578-4462 for a free estimate, a live person answers 24/7, and we’ll confirm the right Kohler part and a firm price before we schedule the visit.

Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch