A Groundwork company - serving Irvine, CA

Schluter Bathroom Remodeling in Irvine, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Bathroom Remodeling: The Irvine Owner’s Guide

We install Schluter bathroom systems across Irvine, and a full bathroom remodel with Schluter waterproofing typically runs $9,000 to $28,000 installed. Planned work like this is scheduled, not same-day: most Irvine bathroom projects take one to three weeks on site once materials are in hand. Owners usually discover a Schluter failure the slow way. A grout line at the shower curb keeps darkening. A soft spot shows up in the drywall behind the tile. A faint musty smell hangs in a hall bath that never quite dries out. By the time the tile starts to move, water has usually been traveling behind it for months.

Call (888) 578-4462

Which Schluter Systems This Applies To

The name Schluter covers several different systems, and the replacement part depends entirely on which one is under your tile. The shower side is usually Kerdi: Kerdi-Board foam panels, Kerdi waterproofing membrane, Kerdi-Band seam tape, Kerdi-Fix sealant, and the Kerdi-Drain or Kerdi-Line linear drain. Floor assemblies in Irvine homes are often Ditra or Ditra-Heat, the uncoupling membrane that isolates tile from slab movement. Borders and profiles live under Schluter-Rondec and TREP trim, and thresholds under Reno-U and Reno-TK ramps.

Identification matters more than most homeowners expect. Kerdi-Board comes in 1/2-inch and 2-inch thicknesses that are not interchangeable, Kerdi-Band is sold in 5-inch and 7-inch rolls, and the drain flange has to match your specific Kerdi-Drain model or the connection won’t seal. Check the printed marking on the board edge or the membrane roll before you price anything. On the OEM question: genuine Schluter parts carry the matched warranty, and aftermarket membranes that claim to be equivalent often fail the thickness and fleece-bond specs that make the system work. In a wet area, we install genuine Schluter.

One compatibility point Irvine owners rarely hear: local water runs hard, and hard water scale attacks the fleece on a Kerdi drain flange and the finish on Rondec trim faster than it does inland. We’ve opened Irvine showers where the waterproofing was sound but the drain grate and trim were scaled solid enough to block flow.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Bathroom System Is Failing

  • Grout that stays dark at the curb and floor line. That’s water wicking under the tile because the membrane seam or drain connection has opened. In Irvine, we regularly see this at the shower curb where the Kerdi-Band lap was too narrow.
  • A soft or spongy spot in adjacent drywall or baseboard. Moisture has escaped the shower assembly and is traveling into the wall cavity. This is the point where a $400 repair turns into a $9,000 rebuild if it’s ignored.
  • Loose or hollow-sounding tile. Tap a few tiles with a screwdriver handle. A dull thud instead of a sharp click means the thinset has released, usually from movement the Ditra membrane was meant to absorb but couldn’t.
  • Musty odor in a bathroom that never fully dries. Trapped moisture behind the membrane, often from a missing or incorrectly overlapped corner. Irvine’s mild climate hides this longer than a colder market would.
  • Cracked or lifting Rondec or TREP trim. Trim separating from the wall usually means the substrate behind it has swelled. Cosmetic on the surface, structural underneath.

Replacement Cost & What’s Included

Here’s what Irvine homeowners actually pay, installed, with materials and labor bundled so you can compare:

Scope Installed Range
Full bathroom remodel with Schluter waterproofing $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation (Kerdi system) $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Vanity installation $800 – $3,000

The range moves on tile choice, whether the drain is relocated, whether a bench or niche is built in, and how much demo and rot repair is hiding behind the old assembly. You get a written line-item quote, upfront pricing with no surprises, and the work is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. We’re an independent service provider and not affiliated with Schluter; we install their systems because they hold up.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Plenty of this is safe to check yourself. Look for the printed board thickness, confirm the membrane is Schluter Kerdi and not an unmarked roll, test the drain for flow, and press on the drywall beside the shower for softness. That tells you what you’re dealing with.

Where it goes wrong is the rebuild. A Kerdi shower is a system: the membrane laps, the band, the sealant, and the drain flange all have to work as one continuous waterproof layer, and a single missed lap means the whole assembly leaks. We’ve torn out Irvine DIY showers where the tile looked perfect and the framing underneath was rotten. This isn’t a place to learn on the job. Call (888) 578-4462 and we’ll walk you through what you’ve got.

FAQs

How long does a Schluter bathroom system last? A correctly installed Kerdi or Ditra assembly should last 25 to 30 years or more. Most failures we see in Irvine trace back to installation detail, not the material.

Can it be repaired instead of replaced? Sometimes. A failed drain grate, a single loose trim piece, or a localized sealant issue can often be repaired. Once water has reached the substrate behind the membrane, replacement is the honest answer.

How long does the swap take? A shower replacement typically runs one to two weeks on site; a full bathroom remodel runs two to four, depending on tile and scope. We schedule it, we don’t rush it.

How do you source the part? We match your system by printed model and thickness, order genuine Schluter components, and confirm everything is on hand before demo starts. No waiting mid-job for a backordered drain.

Get a Straight Answer on Your Irvine Bathroom

Whether it’s a leaking Kerdi shower, a cracked Ditra floor, or a full bathroom you’ve been putting off, we’ll give you a clear scope and a written price. We also work with KraftMaid, Cambria, and Silestone when your remodel includes cabinetry and counters. Calls are answered by a live person 24/7, our technicians are background-checked and arrive in uniform, and every project is covered by the 730-Day Done Right Promise plus 0% financing for 18 months and $1,000 off projects over $10,000. Call (888) 578-4462 to schedule your free estimate.

Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch