Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Kitchen Remodeling: The Irvine Owner’s Guide
We install Sterling-compatible kitchen remodeling in Irvine, and a full kitchen typically runs $14,000-$45,000 installed depending on scope, cabinet grade, and whether the layout changes. Most of the work is scheduled, not same-day, because a kitchen remodel is a sequence of trades, not a swap. Sterling owners usually reach this page one of two ways: a cabinet door that finally split at the hinge after years of Irvine’s dry inland heat, or a drawer that stopped gliding smoothly and turned out to be a failed box or slide rather than a loose screw. Either way, the question underneath is the same: what does it cost to fix this properly, and who do I trust to do it. We can answer both before you commit to anything.
Which Sterling Models This Applies To
Sterling has built kitchen cabinetry across several product lines over the years, and the parts are not interchangeable between them. Slab and shaker doors from different Sterling series use different hinge bore patterns, and a door you order by cabinet width alone will often arrive with the cup hole in the wrong spot. Before we quote a replacement, we look for the manufacturer label inside the cabinet box, usually stapled to the inside of the door or on the back panel of a base cabinet, and measure two things: the door overlay (how much the door covers the face frame) and the hinge cup bore, which is typically 35mm on Sterling’s more recent lines but not on every older one. Those two measurements decide whether an OEM part, a compatible aftermarket door, or a full door-and-box replacement is the honest answer. If you’re weighing Sterling against KraftMaid, Cambria, or Silestone finishes for a partial refresh, we’ll tell you plainly where mixing brands works and where it shows.
One thing we say once and mean: Groundwork Construction Co. of Irvine is an independent service provider. We are not affiliated with Sterling, and we don’t claim to be a Sterling dealer.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Kitchen Remodeling Is Failing
- Doors that sag or rub the frame. Usually a tired hinge or a stripped screw hole in the cabinet face, not the door itself. On older Sterling boxes the particleboard around the hinge screws crumbles over time, and re-driving a screw only buys a few months.
- Drawers that stick or drop when pulled. A worn slide or a cracked drawer box corner. Irvine’s low humidity through summer dries out wood and composite boxes, and corners that were fine for years start to separate.
- Delaminating or peeling door faces. The laminate or veneer lifts at the edges, often near the dishwasher where steam and heat hit hardest. Once the substrate is exposed, moisture gets in and the door is done.
- Cabinet frames pulling away from the wall. A sign the fasteners have loosened or the wall behind the cabinets has shifted. This isn’t cosmetic, and it’s worth checking early so a small fix doesn’t become a full tear-out.
- Cracks at the sink base or along seams. Water damage from a slow leak under the sink softens the cabinet floor and back panel. By the time you see the crack, the leak has usually been there a while.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Irvine, our installed pricing for kitchen remodeling is $14,000-$45,000, and cabinet installation within that scope runs $4,000-$13,000. A smaller kitchen refresh sits in the $9,000-$20,000 range, and countertop work is separate at $2,000-$6,500. What drives the number is scope: how many doors and boxes are being replaced versus repaired, whether the layout changes, and the finish grade you choose. A single door and hinge job is a fraction of a full cabinet replacement, and we quote it that way, line by line, in writing, before any work starts. The price you see is the price you pay. Every job is backed by our 730-Day Done Right Promise, which is one of the longest workmanship guarantees in residential construction. If it’s not done right, we make it right.
DIY or Call Us?
You can safely check a few things yourself. Open and close every door and drawer and note which ones rub or stick. Look inside the cabinet for the Sterling label. Check under the sink for moisture or soft wood with a dry paper towel. That information helps us quote accurately and saves you a service visit.
Where DIY goes wrong is mostly in the swap, not the inspection. Replacing a door or drawer box on a Sterling cabinet requires matching the overlay and bore exactly, and a wrong part damages the face frame when you force it. A cabinet frame pulling from the wall or water damage at the sink base is a structural issue, not a hardware swap, and is where we’d rather be looking at it than guessing. We’re background-checked and arrive in uniform, and our technicians have up to 12 years of experience, including work on cabinets like these.
If you’re ready for a real number, call (888) 578-4462. We answer with a live person, 24/7, not a voicemail.
FAQs
A well-maintained Sterling cabinet install generally holds up 15-20 years, with doors and slides taking the most wear. Irvine’s dry summers and warm inland air are harder on wood and composite than coastal humidity, so delamination and drying cracks show up sooner here than in cooler climates. Call (888) 578-4462 for an exact repair or replacement quote.
Often yes, and it’s worth asking before you assume replacement. A sagging door is usually a hinge fix, and a sticking drawer is usually a slide swap, both far cheaper than new cabinets. Delaminated door faces or water-damaged cabinet floors are usually replacement. We’ll tell you which one you’re looking at. Estimates are free.
A single hinge, slide, or door swap can often be done in one visit, while a full kitchen remodel runs weeks, not days, and we give you the real timeline in writing. We don’t promise same-day on a remodel, because nobody builds a kitchen in a day. Call (888) 578-4462 to schedule your free estimate and get a real schedule.
We identify your Sterling series from the label, overlay, and bore measurements, then source the correct OEM part or a verified compatible equivalent. We don’t claim to stock Sterling parts or carry them on a truck, so sourcing takes a little coordination, and we tell you upfront when a part has a lead time. Call (888) 578-4462 and we’ll start with the label photo.
Every project we take on in Irvine is quoted in writing, with no change orders and no surprises. If you want to know what your Sterling kitchen actually needs, call (888) 578-4462 for a free estimate. We answer around the clock, and we’ll give you a straight answer whether the fix is a hinge or a whole new set of boxes.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.