Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Fence Installation: The Irvine Owner’s Guide
GAF-compatible fence installation in Irvine typically runs $3,500 – $9,000 installed, depending on linear footage, gate count, and whether the run replaces an existing fence or starts fresh. We schedule estimates around Irvine within a few days, and most standard runs finish in one to three site days. Groundwork Construction Co. of Irvine is an independent installer and is not affiliated with GAF.
Owners usually find out something’s wrong the same way: a gate that drags on the driveway, a post that rocks when you lean on it, or a section that’s leaning after the first Santa Ana wind event of the season. By the time a fence looks crooked from the sidewalk, the problem has been working on it for a year or more.
Which GAF Models This Applies To
GAF is a roofing-first manufacturer, and that matters for how you source a fence. GAF does not publish a broad residential fence line the way it publishes shingle series, so when an Irvine homeowner tells us they want “the GAF system” matched to their property, we start by confirming what’s actually on the label rather than assuming a model number exists. Check the inside face of a post or the lower rail for a manufacturer stamp, a series name, or a lot code. Photograph it. That photo does more for matching than any description you can give over the phone.
The OEM-versus-aftermarket call depends on what’s being matched. Posts, rails, and pickets are dimensional components: if the profile matches and the material grade matches, a quality equivalent from a partner like James Hardie or Belgard delivers the same installed result for less money. Proprietary brackets, caps, gate hardware, and color-matched finishes are where aftermarket parts drift, because a 1/16-inch difference in a channel or a shade off in a powder coat is visible from ten feet. For those, we source the exact OEM piece. We don’t stock parts and nothing rides on a truck; every component is ordered to your run’s measurements after the site measure.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your GAF Fence Installation Is Failing
- Posts that rock in dry soil. Irvine’s clay-heavy soil shrinks hard in a dry summer, and a post set too shallow or in soil that wasn’t compacted in lifts starts to move. Once a post loosens, every panel it carries goes with it.
- Gate sag and drag. A gate hanging off a single hinge point or a post that’s lost its footing pulls down at the latch side. If the gate scrapes concrete, the hinge geometry or the post depth is the culprit, not the gate itself.
- Rails pulling away from posts. Fasteners backing out of a post indicate either the wrong fastener for the material or movement at the base. It shows up first on the windward side of the run, the side that takes the Santa Ana gusts off the canyons.
- Sun-chalked or faded finish. Irvine gets strong UV load year-round, and a low-grade finish on rails and caps can chalk within a few seasons. Fading isn’t structural, but chalked surfaces hold dirt and look worse every year.
- Rotted or split material at the base. Wood components that stay in contact with soil and irrigation overspray break down fast in our climate. A split at the base of a post is a replacement, not a repair, once water has been getting in.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a typical Irvine residential run, installed pricing lands in the $3,500 – $9,000 range. That covers site measure, removal and haul-off of the old fence, post setting with proper depth and compaction, rails, pickets, gate build and hang, and hardware. A vinyl run on a flat lot with one gate sits near the bottom of the range; a longer aluminum run with multiple gates, sloped sections, or a block-wall tie-in moves toward the top.
What drives the spread is linear footage first, then gate count, then site conditions: slope, soil, and whether we can get equipment to the fence line. We quote line by line, so you see a per-linear-foot number and a separate gate number rather than one blended figure. Upfront pricing, no surprises; the number you see is the number you pay. All of it sits under the 730-Day Done Right Promise. Kitchens and baths are handled by other trades in our book, and if you’re renovating inside too, we work with KraftMaid, Cambria, and Silestone on those scopes.
DIY or Call Us?
There’s a real line here, and it’s mostly about digging. You can safely walk the run, check for post movement by hand, look for backed-out fasteners, test the gate swing, and photograph label codes. That’s an afternoon, and it tells us exactly what we’re pricing before we arrive. What goes wrong in DIY fence work is post setting: digging below the utility locate, setting shallow in clay that shrinks, skipping compaction, and mixing concrete that cures weak. A fence built on bad footings fails inside two seasons, and by then you’ve paid twice. We’re not going to hand you a step-by-step for concrete work in Irvine soil and call it a weekend project. Call (888) 578-4462 and we’ll tell you straight whether you’re looking at a footings problem or a hardware problem.
FAQs
A properly built fence in Irvine should hold 15 to 25 years, and the footings decide which end of that you get. UV exposure here is the constant stressor; it fades finishes and degrades low-grade material while the structural posts sit in soil that swings between wet and bone dry. Call (888) 578-4462 for an exact quote on your run; estimates are free.
Sometimes, yes. Hardware, hinges, latches, a single gate panel, or one bad rail can be swapped without touching the rest, and we’ll tell you when that’s the smarter spend. Once posts are moving or material is split at the base, repair is a patch on a structural problem and replacement is the honest answer. Call (888) 578-4462 and we’ll price the repair first.
Most standard residential runs finish in one to three site days from the time materials arrive, and gate and hardware work is often done in a single visit. Site measure and material lead time run ahead of that, and we give you both dates up front. Call (888) 578-4462 to get your measure scheduled.
We order to your measured run after the site visit, matching from the label code you photograph, and we don’t stock parts or carry inventory on a truck. If the exact OEM piece isn’t available in a reasonable window, we’ll show you the quality equivalent and the trade-off in writing before you decide. Call (888) 578-4462 to start with a free estimate.
Groundwork Construction Co. of Irvine installs fences across Irvine with background-checked, uniformed technicians and live person phone coverage 24/7. Estimates are free, financing runs 0% for 18 months, and projects over $10,000 take $1,000 off. Call (888) 578-4462 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.