Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Windows & Doors: The Irvine Owner’s Guide
We install and service IKO windows and doors for Irvine homeowners, and a full window replacement here typically runs $4,500 – $15,000, with impact-rated units at $8,000 – $25,000. Most jobs are scheduled and completed within a single visit once the right part is matched to your series. The hard part is never the labor; it’s identifying the exact IKO model and getting the correct hardware, glass pack or weatherstrip so your Irvine home stays sealed against the dry Santa Ana winds and coastal marine layer.
Owners usually discover a failing IKO unit the same way: a draft they can’t trace, a window that won’t latch flush in summer, or condensation trapped between panes at sunrise. In Irvine, we regularly see seals fail on west-facing glass after years of afternoon UV, and door hardware loosen from daily use.
Which IKO Models This Applies To
IKO builds windows and doors across several lines, and the part you need is tied to the series, not just the opening size. Before ordering anything, check the label on the inside jamb or the sash edge; most IKO units carry a model and glass code there. If the sticker is gone, measure the rough opening and the visible glass and note whether the frame is vinyl, aluminum or clad. Those three details narrow the field fast.
The OEM-versus-aftermarket decision matters here. OEM IKO hardware and glass packs guarantee a drop-in fit, but aftermarket equivalents for common series often cost less and perform the same, provided the dimensions and glazing spec match. Our technicians have up to 12 years of experience matching IKO parts, and we’ll tell you plainly which route makes sense for your unit rather than defaulting to the pricier one. A compatibility gotcha to know: IKO impact-rated assemblies use a thicker glazing bead than their standard units, so a standard sash kit won’t seat correctly in an impact frame. Know that before you order.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Windows & Doors Is Failing
- Drafts around the sash or door edge. Worn weatherstrip or a failed seal lets air through, which you’ll notice most on windy Irvine afternoons.
- Condensation between panes. A broken seal lets moisture into the glass pack, a sign the insulated unit has failed.
- A window that won’t latch or close flush. Usually a worn lock, latch or hinge, sometimes a shifted frame from settling.
- Sticking or dragging sashes. Heat and age warp tracks and rollers, especially on south-facing openings.
- Visible rot or cracking at the frame. Water intrusion has reached the frame or sill and needs attention before it spreads.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Irvine, window replacement runs $4,500 – $15,000 and impact window installation runs $8,000 – $25,000, depending on unit count, size, glass spec and whether frames are replaced or just the sash. Here’s how the line items break down:
| Item | Typical Irvine range |
|---|---|
| Single window (standard, installed) | $400 – $1,200 |
| Impact-rated window (installed) | $800 – $2,500 |
| Glass pack / insulated unit swap | $200 – $600 |
| Hardware, weatherstrip, seals | $80 – $300 |
What drives the range is glass spec, frame material and the number of units. You get parts-plus-labor quoted upfront, the number you see is the number you pay, and every install is backed by our 730-Day Done Right Promise. Financing at 0% for 18 months is available, plus $1,000 off projects over $10,000.
DIY or Call Us?
You can safely check the label, measure the rough opening and glass, test the latch and look for condensation between panes. What goes wrong with DIY here is ordering a part that doesn’t match the series, then discovering the bead or roller won’t seat, or forcing a sash and cracking the frame. Replacing a glass pack or re-hanging a door involves weight, alignment and seal tolerances that are easy to get wrong. We’re an independent service provider, not affiliated with IKO, and we’ll source the correct part and install it right. Call (888) 578-4462 and we’ll help you sort the model and the fix.
FAQs
Well-installed IKO units typically last 20 – 30 years, though the glass seal is often the first thing to go, sometimes by year 10 – 15. Irvine’s sun and salt air push seals harder than a mild inland climate would. Call (888) 578-4462 for an exact quote; estimates are free.
Often yes. A failed latch, hinge or weatherstrip is a straightforward repair, and a fogged glass pack can be swapped without replacing the whole unit. Frame rot or a shifted frame usually means replacement. We’ll tell you which you’re facing.
Most single-unit replacements are completed in a single visit, and a whole-home swap typically takes one to two days depending on count and access. We confirm the timeline before we start.
We match the part to your series from the jamb label or precise measurements, then order OEM or a verified aftermarket equivalent based on fit and cost. You get the source and price in writing upfront.
We also service KraftMaid, Cambria and Silestone across our other trades. From foundation to finish line, Groundwork Construction Co. of Irvine handles the full scope, backed in writing by our 730-Day Done Right Promise and live human answers 24/7. Call (888) 578-4462 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.