Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Home Additions & ADU: The Irvine Owner’s Guide
We install Boral-specified home additions and ADUs in Irvine, and the installed range here runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached or attached ADU, depending on square footage, foundation conditions, and finish level. These are planned builds, not emergencies, so the timeline runs in months, not hours. Homeowners usually find out something is wrong in one of three ways: a crack that reappears after patching, a wall that feels cold or soft in one spot, or a tile face that has gone chalky and started shedding after a few seasons of Irvine sun. From there it’s the same conversation every time – what failed, what’s actually behind it, and what a real fix costs.
Key Takeaways
- Boral compatibility depends on the product line, not the brand name alone – we match against the label and measured dimensions before anything is ordered.
- Installed additions in Irvine run $45,000 – $130,000; ADUs run $90,000 – $220,000.
- Most failures trace back to moisture management or movement, not the material itself.
- All our work is covered by the 730-Day Done Right Promise, with upfront pricing and no mid-project surprises.
Which Boral Models This Applies To
Boral covers a lot of ground in residential construction – clay and concrete roof tile, manufactured stone veneer, exterior trim and cladding, and block – and each line carries its own compatibility rules. This page is about the Boral products used on home additions and ADUs in Irvine: primarily roof tile and exterior cladding on the new structure, plus matching material where the addition ties into the existing house.
Identifying the right match starts with the label. Boral tile profiles are stamped or marked on the underside of the tile or on the bundle wrap, and that profile name plus the measured dimensions (tile length, width, and the exposure the course was laid at) is what tells us whether a replacement run is compatible with the original field. Guessing from the roof costs money. An older Boral tile run that looks identical from the ground can differ in profile depth, and laying a mismatched profile on the same plane shows up as uneven shadow lines across the whole roof.
On the OEM-versus-aftermarket question, Boral is one of the brands where exact-match tiles matter more than it does on, say, a standard trim board. Concrete and clay tile are fired or cast to a specific profile, and a close-but-not-identical substitute will pass inspection and still look wrong in Irvine’s hard midday light. For hidden framing and flashing materials, quality equivalents are fine. For anything visible, we match the Boral line.
We’re an independent service provider and not affiliated with Boral. We’re also not a parts warehouse – we don’t stock Boral tile or cladding and nothing is carried on a truck. Materials are specified and sourced per project, which is the only way to guarantee the match.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Home Additions & ADU Is Failing
Most of what goes wrong on a Boral-clad addition in Irvine announces itself well before it becomes structural. Here’s what to watch for:
- Hairline cracks that keep coming back across tile faces. Thermal cycling – Irvine’s warm days and cool coastal evenings – works on any small flaw in the tile bed, and a crack that returns after patching usually means movement underneath, not a cosmetic issue.
- Chalky, powdery residue on the tile or stone surface. Efflorescence or surface breakdown. On cladding it often points to water getting behind the material and finding no way out.
- Pieces shedding or spalling. A face that flakes or crumbles usually means moisture froze or expanded inside the material, or the original install left too little clearance at a penetration.
- Soft or discolored spots where the addition meets the original house. That junction is where flashing fails first. If it’s soft to the touch, water has been getting in for a while.
- Mold, staining, or daylight visible in a new wall or ceiling cavity. Anything you can see through isn’t a finish problem. Stop using the space and get it looked at.
One local reality worth naming: Irvine sits in a fire-conscious county where exterior material choices are scrutinized, and Boral tile and cladding are often selected partly for that reason. When the material fails, the fix has to preserve that performance, not just look right from the curb.
Replacement Cost & What’s Included
Installed pricing for the work we do on Boral-clad additions and ADUs in Irvine:
- Home addition: $45,000 – $130,000
- ADU construction: $90,000 – $220,000
- Garage conversion: $30,000 – $80,000
What drives the range: square footage, foundation and site work, whether the addition ties into an existing roofline or stands free, the Boral line and profile selected, and finish level inside. A tile re-roof over a failing section of an existing addition is a different, smaller job than a full build, and we price both with written line items – material, labor, and disposal separated out. The number you see is the number you pay. No change orders for things that should have been in the original scope.
Every build we do is covered by the 730-Day Done Right Promise – if it isn’t done right, we make it right, and that includes the workmanship behind the Boral install, not just the material.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There’s a short list of things an Irvine homeowner can safely check. Walk the perimeter after a rain and look for staining where the addition meets the original wall. Look up at the tile from the ground for cracked or missing pieces and uneven shadow lines. Feel the interior of any exterior wall for softness or cold spots. Photograph what you find – it makes the estimate conversation faster.
What we don’t recommend is getting on the roof, pulling tile, or opening a wall cavity to inspect flashing yourself. This is height work over a finished structure, tile is heavier than it looks, and the failure you’re trying to diagnose is usually in the layers underneath – exactly where a wrong move turns a repair into a rebuild. The dangerous part isn’t the material. It’s the access.
If something on the list above matches what you’re seeing, call (888) 578-4462. A live person answers, 24/7, and the estimate is free.
FAQs
Boral clay and concrete tile are long-life materials, commonly expected to serve decades when installed with correct underlayment and flashing. The material usually outlasts the components around it – underlayment and flashings are the parts that fail first in Irvine’s sun and occasional heavy rain, and that’s what we inspect before recommending any tile replacement.
Often yes. Isolated cracked tiles, a single failed flashing detail, or a localized area of cladding can be repaired without touching the rest of the assembly. What decides it is whether the failure is surface-level or whether water has been getting behind the material – that’s a site call, and we’ll tell you plainly which one you’re looking at. Call (888) 578-4462 for a free estimate and an honest read.
A localized tile or cladding repair is usually a single visit. A full re-roof over an existing addition runs several days depending on square footage and access. A new addition or ADU is a months-long build with permits and inspections, and we’ll give you a written schedule before work starts – not a verbal guess.
We match the Boral line and profile from the tile markings and measured dimensions, then source the specified material for your project through supplier channels. We don’t keep Boral stock on hand and nothing is carried on a truck – every material run is ordered to the job so the profile and finish match what’s already on your structure. Permits are pulled and inspections passed as part of the scope.
We also work with KraftMaid, Cambria, and Silestone on the interior side of additions and ADUs, so a single contractor can carry the build from foundation to finish line. Calls are answered by a live person around the clock, our technicians have up to 12 years of experience, and every project is backed by the 730-Day Done Right Promise.
Get Your Boral Addition or ADU Priced in Irvine
If you’re planning an addition or ADU in Irvine – or you’ve got a Boral-clad structure that’s showing cracks, chalky surfaces, or soft spots at the tie-in – call (888) 578-4462 for a free estimate and design consult. Current offers include $1,000 off projects over $10,000 and 0% financing for 18 months, and the pricing you get is upfront with no surprises. From foundation to finish line, built to last and backed in writing.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.