Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Bathroom Remodeling: The Irvine Owner’s Guide
PGT bathroom remodeling in Irvine typically runs $9,000 – $28,000 installed, depending on bathroom size, fixture tier, and whether we’re reconfiguring the layout or working within the existing footprint. Every project is quoted upfront with a written line-item estimate, and no number changes once work starts. If a shower valve, fixture trim, or PGT window within the bathroom has failed, we handle the swap and the surrounding tile work in one scope.
Most Irvine owners don’t discover a PGT-related failure until a slow drip shows up under the vanity, a window seal fogs from the inside, or the shower trim pulls loose from the wall. You notice it late because PGT products are built well enough to fail quietly rather than catastrophically. The tell is usually a stain, a soft spot in drywall, or a fixture that suddenly won’t sit flush.
Key Takeaways
- Installed PGT-scope bathroom work in Irvine: $9,000 – $28,000.
- We’re an independent contractor, not affiliated with PGT.
- Written upfront pricing, 730-Day Done Right Promise on all labor.
- Live person answers the phone 24/7 at (888) 578-4462.
Which PGT Models This Applies To
PGT makes windows and doors, not bathroom fixtures. So when an Irvine homeowner says “my PGT bathroom part failed,” they almost always mean either a PGT window inside the bathroom (the most common case) or a shower or vanity fixture they’ve been told matches PGT’s finish family. The window side is where PGT-specific knowledge actually matters: PGT WinGuard and PGT Aluminum series use different glazing and hardware specs, and the part from a Vinyl series won’t fit an Aluminum frame even if the opening looks identical.
To identify your PGT unit, look for the etched label on the interior glass edge or the manufacturer sticker inside the frame jamb. It shows series, glass package, and the original order number. That label is what lets us pull the right replacement sash, balance, or hardware without guessing. On the OEM-vs-aftermarket question: PGT replacement sashes are worth the premium when the window is still under its original warranty; aftermarket balances and operators make sense when the original frame is sound and you’re matching a color that’s been discontinued. Measure the visible glass, the rough opening, and the frame depth before you call – those three numbers save a second trip.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Bathroom Remodeling Is Failing
For Irvine bathrooms, the failure pattern is different than inland California. Irvine sits close enough to the coast that marine layer humidity cycles in and out daily, which is brutal on window seals and tile grout. Here’s what we see most:
- Fogging between the panes. The PGT sealed glass unit has lost its argon fill and moisture barrier. Not a cleaning issue – the seal is gone and the sash needs replacement.
- Water staining on the sill or below the window. Failed caulk joint or a PGT sill pan that wasn’t flashed correctly at install. Irvine’s wind-driven rain finds these fast.
- Sticking or hard-to-latch PGT window in the bathroom. The balance mechanism is worn or the sash has warped from steam exposure. Common in bathrooms without proper exhaust ventilation.
- Tile lifting around a shower valve or window surround. Underlying moisture from a failed fixture seal or missing waterproofing membrane. We’ve pulled dozens in Irvine where the drywall behind the tile was soft to the touch.
- Shower trim that won’t sit flush or drips at the escutcheon. Worn cartridge or a mismatched trim kit installed over the original valve body. Fixing it correctly means matching the valve brand and series, not just the visible plate.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Bathroom remodeling in Irvine runs $9,000 – $28,000 for a full scope, and small bathroom remodels come in at $5,000 – $12,000. A PGT window replacement inside the bathroom, glass and labor included, sits in the $4,500 – $15,000 range depending on how many units and whether impact glazing is specified. Shower replacement alone is $3,000 – $8,500, and a walk-in shower install is $4,500 – $12,000.
What moves you within the range: number of PGT windows in scope, tile selection and how much demo is required, fixture brand (we work with Kohler and a curated list), and whether we’re reworking plumbing rough-in. The estimate we give you is a written, itemized number – parts, labor, and permit listed separately. Every project carries our 730-Day Done Right Promise, so the number you see is the number you pay, and the work is backed in writing.
DIY or Call Us?
You can safely check the PGT window label, measure the glass, and note whether the fogging is inside the seal or just surface condensation. You can caulk a small exterior sill joint. That’s it.
Where this goes wrong: pulling a PGT sash without the right balance tools, opening a wall to chase a leak without knowing where the waterproofing membrane is, or swapping a shower cartridge without shutting the main. We’ve seen Irvine homeowners turn a $400 trim fix into a $6,000 drywall and tile rebuild because they opened the wrong layer first. Moisture in a bathroom wall doesn’t announce itself – it has to be traced.
We keep the diagnostic simple. Call (888) 578-4462, describe what you’re seeing, and we’ll tell you whether it’s a parts swap or a larger repair. Live person, 24/7.
FAQs
A PGT sealed glass unit typically holds its seal for 10 – 20 years in Irvine’s coastal humidity, and the sash hardware closer to 10 – 15. Fogging between the panes means the seal has already failed and the unit needs replacement, not repair. Call (888) 578-4462 for an exact quote – estimates are free.
Sometimes – balances and operators are individually replaceable, and a fogged sash can be swapped without replacing the frame. A failed sealed glass unit or rusted sill pan cannot be repaired; those require replacement. We’ll tell you which situation you’re in after we inspect it. Call (888) 578-4462 to schedule a free estimate.
A PGT sash or balance replacement is typically a two-to-three hour job. A full bathroom remodel is a multi-week project; we give you a day-by-day schedule with the written estimate so you’re not guessing. Call (888) 578-4462 for a firm timeline on your specific scope.
We use the label on your PGT glass or jamb to identify the series, glass package, and order number, then work directly with PGT’s parts channel to match it. If the exact part is discontinued, we source a quality aftermarket equivalent that fits the same frame spec. We don’t keep PGT parts in stock – each replacement is ordered to your unit. Call (888) 578-4462 and have the label number ready.
We’re an independent contractor – not affiliated with PGT. We also service KraftMaid, Cambria, and Silestone products in kitchens and baths. Groundwork Construction Co. of Irvine offers no-hassle upfront pricing, background-checked and uniformed technicians, and the same written guarantee on every Irvine project. Call (888) 578-4462 for your free estimate.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.