Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Windows & Doors: The Irvine Owner’s Guide
Replacing a failed CGI window or door component in Irvine usually runs $450 to $1,450 installed for a single unit, with full CGI-compatible window replacement pricing from $4,500 to $15,000 for a typical Irvine home and impact-rated installations from $8,000 to $25,000. Most Irvine owners find out something has failed the same way: a window that won’t latch flush anymore, a door that drags on the threshold in summer, or fog between the panes that shows up after a hot week. Groundwork Construction Co. of Irvine installs CGI-compatible windows and doors and works on the surrounding parts, and we’re an independent service provider, not affiliated with CGI.
Which CGI Models This Applies To
CGI makes several window and door lines, and the part you need depends on which one is in your wall. The identification tag is usually a small sticker on the top or side of the sash, or on the inside of the jamb on doors, and it carries the series number and the original glass and hardware specs. If the sticker is gone, we pull measurements from the frame itself: rough opening width and height, jamb depth, and the glass make-up stamped on the spacer. That last one matters in Irvine because CGI builds both standard dual-pane and impact-rated laminated units for coastal and wildfire-adjacent zones, and the two don’t interchange in the same frame.
Once we know the series, you’re choosing between an OEM part and a quality aftermarket equivalent. For hinges, rollers, locks and weatherstripping, the aftermarket parts we source are often identical in function and easier to get. For glass units and full sash assemblies, matching the original CGI spec is the safer call. We don’t carry stock and we don’t keep parts on a truck; every part is matched to your unit before we schedule the install, and we also handle KraftMaid, Cambria and Silestone cabinetry and surfacing work elsewhere in the house when a window or door swap turns into a bigger project.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Windows & Doors Is Failing
- Fog or condensation trapped between the panes. The seal on the insulated glass unit has failed, letting moisture in. In Irvine’s inland heat cycles, this often shows up within ten to fifteen years, faster on west-facing glass.
- A door that drags or won’t latch in summer. Sticking is usually a hinge failure or a frame that has shifted with seasonal swelling. Left alone, the drag wears the threshold and the weather seal.
- Window won’t stay open or won’t close flush. A worn balance or a broken sash lock. A CGI casement that won’t crank smoothly is usually a stripped operator, and the part is replaceable without touching the frame.
- Drafts and whistling along the edges. Weatherstripping has compressed or hardened. Irvine’s dry summers and wet winters age the seal unevenly, and a $40 strip of the right material can fix a draft that feels like a whole-window problem.
- Water stains on the interior sill or jamb. Failed perimeter sealant or a blocked weep channel on the CGI frame. This one leads to rot in the surrounding wall if it goes unaddressed through a rainy season.
Replacement Cost & What’s Included
Here’s how the numbers break down for Irvine:
| Scope | Installed Price Range |
|---|---|
| Single failed component (glass unit, hinge, lock, operator, weather seal) | $450 – $1,450 |
| CGI-compatible window replacement, whole home typical | $4,500 – $15,000 |
| Impact-rated window installation | $8,000 – $25,000 |
What drives the range: the series, whether you’re replacing just the glass or the full unit, story height and access, and whether the frame needs repair before the new part goes in. Our quotes are line-item, upfront pricing with no surprises, and labor is listed separately from the part so you can see exactly what you’re paying for. Every install is covered by the 730-Day Done Right Promise, and if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some things are safe to check yourself. You can measure the rough opening, find the identification tag, inspect the weatherstripping by hand, and clear a blocked weep channel on a CGI frame. Those are simple and reversible. Where DIY goes wrong is on full glass units, impact-rated laminated glass, and doors where the frame itself has shifted. A mis-set insulated glass unit leaks again within a season, and impact-rated glass has to be set to the manufacturer’s spec or it loses the rating that justified the cost. A pivot-door hinge under tension can also swing free and cause injury, which is why we handle that work with proper blocking and a second set of hands. If you’re not sure which side of the line your job falls on, call (888) 578-4462 and describe the symptom.
FAQs
Expect fifteen to twenty years from a CGI window and twenty-five or more from a well-maintained door, with the insulated glass unit usually failing first at ten to fifteen years. Irvine’s inland heat and sun exposure on west-facing glass shortens that window. Call (888) 578-4462 for an exact quote on replacement, estimates are free.
Often yes. A failed balance, operator, lock or weather seal can be swapped without replacing the unit, and that’s the first thing we check. A fogged insulated glass unit can also be re-glazed rather than replaced whole. Call (888) 578-4462 and we’ll tell you plainly which option makes sense.
A single component swap, like a hinge or a weather seal, is usually a one-visit job of an hour or two. A full glass unit or a window replacement runs half a day to a full day per unit, and affects the schedule. Most jobs are completed in a single visit.
We match the series and the glass spec from your identification tag or frame measurements, then order the part before we schedule install. We don’t carry stock, so the part arrives confirmed-fit rather than guessed at. Call (888) 578-4462 to start with a free estimate.
Schedule Your CGI Window & Door Service in Irvine
If a CGI window or door in your Irvine home has a failed part, don’t wait for a rainy season to make it worse. Groundwork Construction Co. of Irvine answers live, 24/7, with background-checked, uniformed technicians on every job and upfront pricing you can plan around. Call (888) 578-4462 for a free estimate, and we’ll match the part to your exact unit and get it installed right.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.