Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Bathroom Remodeling: The Irvine Owner’s Guide
We install CGI bathroom remodeling in Irvine, and a full bathroom typically runs $9,000 to $28,000 installed, while a smaller hall or guest bath lands between $5,000 and $12,000. Single fixtures, like a shower replacement or a tub-to-shower conversion, get done in a single visit when the layout allows. Groundwork Construction Co. of Irvine is an independent service provider and is not affiliated with CGI.
Homeowners in Irvine usually call us after water tells on them. You find a soft spot in the subfloor near the toilet flange, a hairline crack spreading across a floor tile, or grout that keeps crumbling no matter how many times you re-caulk it. In homes built through the 1990s in neighborhoods like Woodbridge and Westpark, we see the same pattern: original tile set over a mortar bed, now past its service life, with shower pans that have been quietly leaking into the framing for years. The surface looks fine until it isn’t. By the time the tile cracks, the waterproofing behind it has often already failed. Getting an honest read on how far the damage goes is the first real step, and it’s what our free estimate covers.
Which CGI Models This Applies To
CGI encompasses a wide range of bathroom products, so the right approach depends on what’s actually in your home. The first thing we check is the label. Look inside the vanity cabinet door, on the back of the tank lid on a CGI toilet, and on the underside rim of the tub or shower pan; most CGI fixtures carry a model and series number stamped or stickered there. If the sticker is gone, we measure: a vanity cutout, a tub rough-in at 60 by 30 or 60 by 32 inches, or a shower pan footprint tells us which series you’re dealing with. That matters because rough-in dimensions shift between product lines, and a new fixture has to match the existing drain and supply locations or the job turns into a wall-opening project.
On the OEM-versus-aftermarket question, CGI’s own replacement parts fit the model line with no fuss, and for anything behind a wall we generally lean that way. For visible hardware, trim, and finishes, quality aftermarket equivalents often cost less and hold up fine, as long as the dimensions and material match. We’ll tell you plainly which category your replacement falls into. We keep no parts in stock and carry nothing on a truck; everything for a CGI project in Irvine gets sourced to the specific model before we schedule. The same brand-matching discipline we apply to KraftMaid, Cambria, and Silestone cabinetry work applies here.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Bathroom Remodeling Is Failing
Bathroom failures rarely announce themselves. They leak, swell, and stain until the damage forces the issue. Here’s what we look for, and what each symptom usually means underneath.
- Soft or spongy floor near the toilet or shower. Water has been reaching the subfloor, often from a failed wax ring or a shower pan that’s lost its seal. Particleboard and even plywood swell and rot once they stay wet, and the fix goes deeper than a new floor covering.
- Cracked or loose floor tile with grout that won’t stay put. The tile is moving because the substrate underneath has shifted or swelled. Re-grouting hides it for a few months; the deflection is the real problem.
- Peeling paint or bubbling drywall on the wall behind the shower. Moisture is getting past the tile or through failed caulk at a seam. In Irvine’s dry climate this stays hidden longer than it would in a humid region, so the damage is usually further along when it finally shows.
- A shower pan that holds water or drains slowly. The slope has failed or the drain seal is compromised. Poor drainage keeps water sitting against the waterproofing, and that’s where the rot starts.
- Persistent musty smell that returns after cleaning. That’s mold feeding on trapped moisture inside a wall cavity or under a pan. Surface cleaning doesn’t reach it, and air quality in a closed Irvine bathroom suffers for it.
Replacement Cost & What’s Included
A CGI bathroom remodel in Irvine runs $9,000 to $28,000 installed, and where you land depends on scope. A small bathroom remodel sits at $5,000 to $12,000. A walk-in shower installation is $4,500 to $12,000, a tub-to-shower conversion is $3,500 to $10,000, a shower replacement is $3,000 to $8,500, and a bathroom vanity installation is $800 to $3,000. The range driver is almost always what’s behind the wall: sound framing and a solid substrate keep you at the low end, while rot repair, plumbing relocation, or a full waterproofing rebuild pushes higher.
Every quote breaks out parts and labor line by line, so you see what the fixture costs and what the install costs. Pricing is upfront, the number you see is the number you pay, and there are no surprise change orders mid-job. Work is covered by our 730-Day Done Right Promise. Calls are answered by a live person 24/7, and the $1,000 off projects over $10,000 plus 0% financing for 18 months are available to Irvine homeowners who qualify.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some checks are safe to do yourself. You can lift the toilet tank lid and read the CGI label, measure your tub or shower pan, pull up a loose tile to see the substrate, and press on the floor around the toilet to feel for softness. That information helps us quote accurately.
Where DIY goes wrong is behind the wall. Tearing out a shower or tub means cutting into waterproofing, drain connections, and sometimes a load path, and a small mistake there becomes a slow leak that rots framing for years. Bathroom work involves water and electricity in the same small space, and we’ve seen more damage from half-finished DIY tear-outs than from the original problem. If your CGI bath needs real repair, call (888) 578-4462 for a free estimate. We’ll tell you what’s actually failing and what it takes to fix it right.
FAQs
Expect 15 to 25 years for tile, waterproofing, and fixtures under normal use, though Irvine’s dry air can make a slow leak stay hidden longer, so the failure often surfaces later and larger. A bathroom with a slow shower pan leak will fail on the shorter end. Call (888) 578-4462 for an exact quote; estimates are free.
Sometimes yes. A single failed fixture, a bad wax ring, or a cracked shower pan can be repaired or replaced without a full remodel. If the substrate or framing has taken on water, a partial rebuild is usually the honest call. We’ll tell you which one your bathroom needs. Call (888) 578-4462 to schedule a free estimate.
A single-fixture replacement like a shower or vanity is often done in a single visit. A full remodel runs longer, typically one to three weeks depending on scope and material lead times. We give you a realistic schedule up front and hold to it.
We identify the model from the CGI label or, if it’s missing, by measuring the rough-in, then order the matching part before we schedule. We claim no stock and carry no parts on a truck; the right part gets sourced to your model. Call (888) 578-4462 for a free estimate; upfront pricing means the number you see is the number you pay.
Get Your CGI Bathroom Priced in Irvine
If your CGI bathroom is showing the signs above, the free estimate is the fastest way to know whether you’re looking at a repair or a rebuild. Call Groundwork Construction Co. of Irvine at (888) 578-4462 to schedule yours. A live person answers around the clock, our background-checked, uniformed technicians walk the space with you, and you leave with a written, line-item quote and the 730-Day Done Right Promise behind the work. Our technicians have up to 12 years of experience on projects like yours across Irvine.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.