Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Driveway & Pavers: The Irvine Owner’s Guide
We install and replace CGI driveway and paver systems for homeowners across Irvine, and an installed paver driveway typically runs $7,000 – $18,000 here depending on square footage, base prep, and edge restraints. Most Irvine owners call us when they notice one paver lifting, water pooling against the garage slab, or a joint line that has started running straight through the middle of the driveway. We get you a written, line-item estimate in a single visit.
The pattern is familiar: a driveway that looked settled for years suddenly shifts after a wet winter or a week of 90-degree afternoons in Northwood or Turtle Rock. That’s usually not the paver failing. It’s the base, the sand, or the edge restraint giving way underneath, and the top layer is just the first place you see it.
Which CGI Models This Applies To
CGI is a recognized brand used across several driveway and paver formats: interlocking concrete pavers, permeable paver systems, and modular paver slabs, each with its own sub-base spec and jointing method. What matters for matching is not the model year but the paver profile, the thickness (common ranges run roughly 1.5 to 2.4 inches for concrete pavers, thicker for driveway-grade units), and the base depth required for vehicle loading. Your existing driveway’s dimensions and the pattern matter too: a running bond replacement needs different edge restraint than a herringbone field does.
The most reliable way to identify the right part is to pull one paver from the driveway edge and read the embossed manufacturer mark and dimensions from the underside. Photos of the paver face and a tape measure give us what we need to match it.
For CGI specifically, the OEM-versus-aftermarket question is real. Original CGI pavers protect the pattern and color match exactly. Quality aftermarket equivalents can match profile and thickness and save money, but the color lot rarely matches a weathered surface precisely, so patching blind rarely looks right; replacing a full field does. We’ll show you both paths before you commit. We also handle KraftMaid, Cambria, and Silestone in adjacent trades, so a full exterior project stays with one contractor. Groundwork Construction Co. of Irvine is an independent service provider and is not affiliated with CGI.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Driveway & Pavers Is Failing
Irvine’s clay-heavy soil expands and contracts with our wet-dry cycles, and that movement is what most driveway failures here trace back to. Watch for these five symptoms:
- Pavers lifting or rocking underfoot. Caused by base consolidation lost to soil movement or poor initial compaction. A paver that moves will eventually crack.
- Sand washing out of the joints. Running water is scouring the joint between pavers. Usually the edge restraint has failed or the field has lost its slope toward drainage.
- Standing water against the garage slab. The driveway has settled below the slab edge or the original pitch is gone. Left alone, that water reaches the garage floor and the soil under it.
- Visible cracks that continue across pavers or through the base. Movement underneath is transferring up through the surface. Small surface cracks widen fast once water gets in.
- Weeds pushing up between pavers. Not just cosmetic: it signals joint sand is gone and the base may be soft. Weeds follow the water path.
One note on Irvine drainage: many properties drain toward the street, and a driveway that has lost even a quarter inch of slope will pond after winter storms. That ponding accelerates every other symptom on this list.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here are the installed ranges we use for Irvine, parts and labor together:
- Paver driveway installation: $7,000 – $18,000
- Concrete driveway installation: $4,500 – $12,000
- Asphalt driveway paving: $3,500 – $9,000
- Driveway replacement (full removal and redo): $5,000 – $14,000
- Driveway sealing (maintenance, not replacement): $250 – $700
What drives the range: square footage, how deep the excavation has to go to reach stable base, whether the existing driveway has to be hauled away, edge restraint and drainage corrections, and the paver profile itself. We give you a written line-item estimate before any work begins, so the number you see is the number you pay.
Every driveway project is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. Most jobs are completed in a single visit when the scope allows. Paving is a planned project, not an emergency, so we schedule it right rather than rush it. No-hassle upfront pricing, and 0% financing for 18 months with $1,000 off projects over $10,000.
DIY or Call Us?
You can safely do the diagnostic work: walk the driveway and note which pavers move, check the joint lines for missing sand, and watch where water sits after a rain. That information makes our estimate sharper.
What goes wrong with DIY here is the base, not the surface. Homeowners often reset a paver on top of sand that’s still soft. It looks right for a month, then fails again because the compaction and the drainage slope were never corrected underneath. Lifting a full field to fix base compaction and reestablish pitch is heavy, equipment-intensive work, and doing it halfway leaves you with a driveway that keeps failing. We’d rather come out and tell you what actually needs to happen. Call (888) 578-4462 to schedule your free estimate.
FAQs
A properly installed CGI paver driveway typically lasts 25 to 30 years. The pavers themselves hold up well; the surface life depends on the base staying stable and the edges staying restrained. In Irvine’s clay soil, the base prep and edge restraint determine how long you get. Call (888) 578-4462 and we’ll assess yours.
Yes, if the failure is isolated to one area or the edge restraint, and the base underneath is intact. A single section reset with proper base and joint sand can solve it. If settlement is spread across the field or the pitch is gone, replacement is the honest answer. Call (888) 578-4462 for a free estimate to find out which applies.
A typical Irvine paver driveway takes two to four days from removal through finished joints, depending on square footage and how much base work is needed. Most of that time is preparation, not paving. Call (888) 578-4462 for a scheduling estimate.
We pull a paver from your existing field to read the embossed mark and confirm the thickness and profile, then match it to a current CGI or quality equivalent. That physical check is the only way to guarantee a fit. Call (888) 578-4462 to get it started.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.