Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Kitchen Remodeling: The Irvine Owner’s Guide
Replacing CWS kitchen cabinetry, doors, or hardware that’s failing in an Irvine home typically runs $4,000 – $45,000 depending on scope, and most single-component swaps (a door set, drawer boxes, or a hinge and glide package) can be scheduled within the same week rather than waiting on a full remodel calendar. A full CWS kitchen remodel installed by our team in Irvine lands in the $14,000 – $45,000 range. Most Irvine CWS owners don’t discover a problem until a door sags past the frame line, a soft-close glide finally stops cushioning, or a drawer box swells and sticks after a humid stretch. Irvine’s inland heat and seasonal dryness push against cabinet joinery year-round, and that’s usually the first place you’ll see it.
Which CWS Models This Applies To
CWS cabinetry shows up across a wide spread of series lines – from standard overlay shaker and raised-panel fronts to full-access frameless boxes. The identifying information is almost always on the inside face of a cabinet door or on the back panel of a drawer box: a paper label or foil sticker with a series code, box dimension, and finish name. If the label is gone, measure the door height and width to the nearest sixteenth of an inch and note the overlay style (partial or full). CWS hinge and glide patterns changed across production runs, so a “looks the same” hinge can physically fit and still sit off-plane. Our team confirms the series code before ordering anything.
When a part fails, the decision is OEM versus a quality aftermarket equivalent. OEM CWS parts match the original bore spacing and finish exactly, which matters on visible hardware. Aftermarket equivalents in steel and alloy are often equal or better in load rating and are more available, especially for discontinued series. On the Irvine side, we match the part to the box, not just the model name – it’s the only way the door hangs true. We don’t carry stock and don’t keep parts on a truck; every part is sourced and verified for your specific unit before the visit. Groundwork Construction Co. of Irvine is an independent service provider, not affiliated with CWS.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Kitchen Remodeling Is Failing
- Sagging doors that won’t stay shut. Worn hinge cups or stripped screw holes in the stile – the hinge loses its hold and the door drops out of plane.
- Soft-close that no longer cushions. Damaged hydraulic glide cartridges in the drawer slides. Once the damping fluid escapes, the slide slams and the drawer box takes the impact.
- Sticking drawers after a dry stretch. Swollen or warped drawer boxes and worn roller glides. In Irvine’s inland heat, wood boxes can swell 1/16 inch or more and bind against the frame.
- Cracks at the hinge screw holes. Stile and box cracks from over-torqued or repeated hardware swaps – the screw hole wallows out and the hinge pulls loose.
- Delaminating or chipped fronts. Failed edge banding or finish on the door face. Once water or heat gets under the finish, the front lifts at the edges.
Replacement Cost & What’s Included
For Irvine kitchens, our installed pricing breaks down this way:
- Single door, drawer box, or hardware set: priced within the cabinet installation range below, quoted line by line.
- Cabinet installation (partial or full front replacement): $4,000 – $13,000
- Countertop installation (if paired with cabinet work): $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
- Full CWS kitchen remodel: $14,000 – $45,000
The range is driven by series line, part availability, and finish. Parts and labor are quoted separately so you see exactly what the part costs and what the install costs. The work carries our 730-Day Done Right Promise – if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
An owner can safely check the series label, measure the door and box, tighten a loose hinge screw, and clean glide tracks. Those are low-risk. Where DIY goes wrong on CWS cabinetry is re-drilling screw holes in the stile – a hole drilled a few degrees off throws the door out of plane and there’s no second chance on that stile. Swapping a full drawer box or glide set also requires confirming the box depth and glide pattern against the specific series, and a mismatched part damages the cabinet frame over time. For anything involving re-boring or full hardware replacement, call (888) 578-4462 and we’ll walk you through it or schedule a visit.
FAQs
The cabinetry itself usually holds 15-20 years, but hardware – hinges and drawer glides – is the first thing to fail, often around the 8-12 year mark in Irvine’s heat and seasonal dryness. The parts go before the wood does, which is good news: replacing them is far cheaper than replacing the boxes.
Sometimes. A loose hinge screw can be re-seated with a wood insert, and a glide can often be cleaned and re-tensioned. Once a glide cartridge leaks or a door stile cracks, replacement is the honest call. We’ll tell you which side you’re on before any work starts.
A single door or drawer set is usually a couple of hours, and a full kitchen front is typically one to two days depending on series and finish. The parts are sourced ahead of the visit so the work isn’t held up mid-job.
We identify the series code and finish from the cabinet label, then match the specific hinge bore or glide pattern before ordering. We don’t stock CWS parts and don’t carry them on a truck – every part is confirmed against your specific cabinet before it arrives.
Get Started
We also service KraftMaid, Cambria, and Silestone cabinetry and countertops for the same kitchens. Our technicians have up to 12 years of experience, and every project is covered by our 730-Day Done Right Promise, upfront pricing with no surprises, and 0% financing for 18 months plus $1,000 off on projects over $10,000. Call (888) 578-4462 to schedule your free estimate – a live person answers around the clock.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.