A Groundwork company - serving Irvine, CA
C

CWS Driveway & Pavers in Irvine, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CWS Driveway & Pavers: The Irvine Owner’s Guide

We install CWS-compatible driveway and paver systems across Irvine, and a full paver driveway usually runs $7,000 to $18,000 installed, depending on square footage, base prep, and the pattern you choose. Concrete runs $4,500 to $12,000. If a paver, a border course, or a sealer coat has failed, we can usually schedule an evaluation within a few days – driveways aren’t an emergency, but a failing joint or lifted paver gets worse with every rain.

Call (888) 578-4462

Most Irvine owners find out something’s wrong the same way. A paver on the apron rocks underfoot when they pull in. A hairline crack opens along the driveway’s edge after a summer. Or water starts pooling against the garage threshold after a winter storm instead of draining to the street. The part itself is rarely the whole story – in Irvine it’s almost always base, drainage, or a joint that opened before the pavers did.

Which CWS Models This Applies To

CWS paver driveways use interlocking concrete pavers in standard thicknesses, with edge restraint and a compacted aggregate base underneath. If you’re matching a paver to an existing run, the two specs that decide compatibility are thickness (most CWS driveways use 60mm pavers, not the 40mm used for patios) and the paver’s nominal face dimensions, which vary by series and color line. The underside or a corner stamp usually carries the model reference.

Measure before you order anything. A 60mm paver set into a 40mm field will sit proud of the neighbors and rock within a season. Thickness and joint spacing matter more than color for structural fit – color can be blended, thickness can’t.

On the OEM-versus-aftermarket question for CWS specifically: discontinued series are common, and matching an exact old paver is sometimes impossible. A quality aftermarket paver that matches thickness and joint system will perform fine. The trade-off is visual, not structural. The new paver may read a half-shade off the old ones, which is normal and fades as the field weathers.

One brand note: the company also sources KraftMaid, Cambria, and Silestone for interior remodel work. Driveway projects don’t touch those lines, but Irvine homeowners remodeling more than one part of the property appreciate keeping the same contractor “from foundation to finish line.” We’re an independent provider and not affiliated with CWS.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CWS Driveway & Pavers Is Failing

  • Rocking pavers on the apron or entry. The base has settled or wasn’t compacted to full depth. If the paver moves, water is getting under it, and the joint sand is gone.
  • Joint sand washing out after storms. Missing sand means open gaps that fill with water. Left alone, the bedding layer erodes and neighbors start to shift.
  • Efflorescence – white haze on the paver face. Mineral salts rising from moisture in the base. Usually a symptom of water staying under the pavers instead of draining away.
  • Edge restraint lifting or separating. The paver edge has no lateral support left, and the outer course will keep spreading outward. Fix the restraint before you touch the pavers.
  • Cracks along a linear joint or a sunken section. Often subgrade movement, especially on Irvine lots with expansive soils or on grades that don’t shed water.

Irvine’s dry summers and winter rain cycles are hard on paver joints. The clay-heavy soils in some neighborhoods swell when wet and shrink when dry, and once the base loses compaction, the pavers follow. We see more joint failures after the first January rainstorm than during summer.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s how CWS-compatible driveway work prices in Irvine, installed:

Work Installed Range
Paver Driveway Installation $7,000 – $18,000
Concrete Driveway Installation $4,500 – $12,000
Asphalt Driveway Paving $3,500 – $9,000
Driveway Replacement $5,000 – $14,000
Driveway Sealing $250 – $700

What drives the range: square footage, existing base condition, whether the old pavers or concrete have to be removed and hauled, drainage corrections, edge restraint repairs, and paver pattern. Straight-lay runs cheaper than herringbone. A joint-wash and reseal on an otherwise sound driveway is a few hundred dollars; a full install with a new base and new restraint is at the top of the range.

We quote line by line – parts, base material, labor, haul-off, separately – so you can see what you’re paying for. Upfront pricing, no surprises: the number you see is the number you pay. Every install is backed by our 730-Day Done Right Promise.

DIY or Call Us?

An owner can safely check a few things: measure paver thickness with a tape at a lifted corner, sweep joint sand to see where the gaps are widest, and watch where water pools after a rain. That tells you whether you’re looking at a surface fix or a base problem.

Where DIY goes wrong: pulling a paver to see underneath and not being able to set and compact it back correctly, or adding sand to a joint that has no restraint holding the edge. If the base below is loose, more sand just disappears. Replacing a full run is heavy, precise work – pavers wrong-side-up in the pattern read as a mistake forever.

If you’re not sure whether you have a surface problem or a base problem, that’s the right moment to call us. We’ll tell you honestly. Call (888) 578-4462 and we’ll schedule a free estimate.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch