A Groundwork company - serving Irvine, CA
M

Mr-Glass Kitchen Remodeling in Irvine, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mr-Glass Kitchen Remodeling: The Irvine Owner’s Guide

Mr-Glass-compatible kitchen remodeling work in Irvine typically runs $14,000 – $45,000 for a full kitchen, with cabinet installation at $4,000 – $13,000, countertops at $2,000 – $6,500, and backsplash work at $800 – $2,500. We’re an independent service provider, not affiliated with Mr-Glass, and we quote every job in writing before anything gets ordered. Most Irvine owners find their way here after a kitchen they expected to last starts showing its age in a specific, visible way: a cabinet face that’s delaminating near the dishwasher, a countertop seam that’s lifted, or a glass backsplash panel that’s cracked after a shifting cabinet.

Call (888) 578-4462

That discovery usually happens in the middle of something else. You’re wiping down the sink run on a Saturday, catch a rough edge on a Mr-Glass surface, and start wondering whether it can be patched or whether the whole run needs to come out. This page answers that question for Irvine homes specifically.

Key Takeaways

  • Full Mr-Glass kitchen remodeling in Irvine: $14,000 – $45,000 installed, depending on scope.
  • Countertop-only work: $2,000 – $6,500. Cabinet installation alone: $4,000 – $13,000.
  • Mr-Glass uses proprietary profile dimensions on several series, so a generic replacement panel often won’t seat correctly.
  • Every job we do carries the 730-Day Done Right Promise.

Which Mr-Glass Models This Applies To

Mr-Glass has built its kitchen business across a handful of cabinet and surface series, and the line has shifted dimensionally over the years. The short version: a panel or top spec’d for one series will not reliably fit a cabinet built to another. If your kitchen was installed in the last decade, you’re most likely dealing with the mid-tier shaker and flat-panel series; earlier builds lean toward the older profile frames. Both are still serviceable, but the replacement stock differs.

The fastest way to identify what you have is to open a door or drawer on the cabinet nearest the sink and look for the manufacturer label inside the face frame or on the back panel. Where there’s no label, measure three things and write them down: the cabinet face height, the door overlay (how far the door sits over the frame), and the hinge cup bore. Those three numbers will match your unit to a series. Overlay is where most Irvine owners get burned, because a 1/2-inch difference between series means a replacement door won’t cover the opening. Our technicians have up to 12 years of experience reading these measurements on Mr-Glass units, and we’d rather spend twenty minutes confirming the spec than order the wrong run and lose two weeks.

On the OEM question, Mr-Glass factory parts are the safe match, but a small set of aftermarket suppliers carry equivalent spec lines for the mid-tier cabinets at roughly 20 – 30% less, and those are fine on a straight swap where the frame is sound. Where the frame itself is compromised, aftermarket gets you nothing, and we’ll tell you that plainly.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mr-Glass Kitchen Remodeling Is Failing

  • Cabinet doors that no longer sit flush. In Irvine’s dry inland summers, the wood face frame on older Mr-Glass runs shrinks slightly and pulls the hinges out of alignment. A door that sits proud at the top and tight at the bottom usually means a hinge plate has loosened, not a bent door.
  • Delamination along the bottom of base cabinets. This is the classic dishwasher failure. Steam escapes a worn gasket and the cabinet’s bottom rail absorbs it. Once the edge lifts, it won’t glue down flat again.
  • A lifted or cloudy countertop seam. Mr-Glass tops are joined with a seam that weakens over time under thermal cycling. Both halves are typically still solid; the joint between them is what’s given way.
  • A cracked glass backsplash panel. Usually a hairline crack radiating from a fastener point, caused by the cabinet behind it settling. It looks cosmetic and is often not.
  • Soft or spongy spots on the cabinet floor. A slow sink or dishwasher leak that’s been running for a while. This one is worth checking early, because water damage under a Mr-Glass cabinet tends to spread laterally before you see it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here are the Mr-Glass kitchen totals Irvine homeowners are actually paying us, installed:

Scope Installed range
Full kitchen remodel $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

Where you land in that range comes down to three things: the linear footage of cabinet run, whether the existing counters can be reused, and whether the plumbing or electrical under the cabinets has to move. Those three drive 80% of the swing. Our pricing is why the range is honest and not a bait number: the quote we hand you is the number you pay, and there are no change-order surprises once the cabinets are out.

Every Mr-Glass job we complete is covered by the 730-Day Done Right Promise. If the workmanship fails inside that window, we come back and fix it. The parts and materials carry their own manufacturer coverage on top of that.

DIY or Call Us?

There’s a real split here, and it’s worth being honest about. You can safely check the cabinet labels, measure your overlay and hinge bore, and tighten a loose hinge screw yourself. That’s useful work, and it saves time. What you should not attempt is pulling a countertop run that’s glued and screwed to the cabinet, or replacing a glass backsplash panel, because both require shutting off water and gas at the cabinet and both can crack the surrounding surfaces if pried wrong. A mis-set countertop can also pull the cabinet frame out of square, which turns a $2,000 fix into a $13,000 cabinetry job.

If the failure is cosmetic, call us and we’ll tell you it’s cosmetic. If it’s structural or water-related, we’ll come look. Either way, call (888) 578-4462 for a free estimate, and we’ll give you an upfront number before anything gets ordered.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch