Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Roofing: The Irvine Owner’s Guide
We install and service Therma-Tru fiberglass door systems and the roofing flashings, thresholds, and head/jamb assemblies around them, and most of that work falls in the $400 – $1,800 range for repairs and $8,000 – $20,000 for a full roof replacement when the door-to-roof transition has failed. Same-day repairs aren’t something we promise; most of this work gets scheduled within a few days of your estimate, and the visit itself is often completed in a single trip once parts are confirmed.
Irvine owners usually find the problem the same way. A dark streak shows up on the ceiling inside the entry, or the carpet near the door feels damp after a Santa Ana wind-driven rain. Sometimes it’s the fiberglass door panel itself, and sometimes it’s the flashing detail where the door head meets the roof plane. Either way, the symptom is almost always water where water shouldn’t be.
Key Takeaways
- Most Therma-Tru door-related roof leaks in Irvine trace to head flashing, threshold pans, or failed sealant, not the door slab itself.
- Repairs typically run $400 – $1,800; a full re-roof where the leak originated runs $8,000 – $20,000.
- We’re an independent service provider, not affiliated with Therma-Tru.
- Our technicians have up to 12 years of experience with fiberglass entry systems and the roofing details around them.
- Every install is covered by our 730-Day Done Right Promise.
Which Therma-Tru Models This Applies To
Therma-Tru makes fiberglass and steel entry doors, patio doors, and sidelight systems, and the roofing interface matters most on their entry door lines. The Smooth-Star and Fiber-Classic lines, plus the Signet and Classic-Craft series, are the ones most Irvine owners have on their homes. Each one uses slightly different threshold widths and jamb depths, and that matters because the flashing and head trim have to match the door’s rough opening, not the other way around.
To identify what you have, look for the Therma-Tru label on the hinge-side jamb or the top of the door slab. Note the model number, the door width (typically 36 inches for a standard entry), and the rough opening dimension. If the label is gone, a tape measure across the threshold opening gets us most of the way there.
The OEM-versus-aftermarket decision is real here. Therma-Tru thresholds, sill pans, and head flashings are made to their door specs, and a generic aftermarket sill pan from a box store often won’t line up with the door’s drainage plane. In Irvine, where we get seasonal rain concentrated into a short window, that mismatch is why some installs leak within two seasons. We source the correct part for your specific model rather than force-fitting something close.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Roofing Is Failing
- Water stains on the ceiling near the entry. This usually means the head flashing above the door has separated from the roof or the sealant has failed, letting water track down the wall cavity.
- Damp carpet or threshold inside the door after rain. A failed threshold sill pan or a worn door sweep lets wind-driven rain past the door base, common in Irvine during our winter storms.
- Peeling paint or soft trim around the door frame. Moisture trapped behind the trim is breaking down the substrate, which points to a gap in the flashing or the jamb sealant.
- Visible gaps or lifted flashing at the roofline where it meets the door head. Thermal movement and UV exposure break down sealant over time, and a lifted piece of flashing lets water straight into the wall.
- Daylight visible around the door frame or a draft you can feel. A misaligned jamb or settling framing around the door has opened a path for both air and water.
Each of these tells us something different about where the failure lives. That’s why the first step on any Irvine job is a close inspection of the flashing detail, not just a visual glance from the ground.
Replacement Cost & What’s Included
Replacement and repair pricing in Irvine depends on whether the fix is a flashing and sealant repair or a full re-roof where the door-to-roof transition failed. Typical ranges:
- Flashing repair or re-seal around the door head: $400 – $900
- Threshold pan or sill replacement: $600 – $1,200
- Jamb trim and sealant rebuild: $500 – $1,800
- Full roof replacement where the leak originated: $8,000 – $20,000
What drives the number up is the scope of water damage behind the trim, whether the door slab itself needs replacement, and access to the roof plane over the entry. We quote parts and labor as separate line items so you can see exactly what you’re paying for. With our no-hassle upfront pricing, the number you see is the number you pay. Every install is covered by the 730-Day Done Right Promise, and we pull the permits and pass the inspections.
What’s included in the quote
- On-site evaluation of the door-to-roof transition and wall cavity
- Correct part sourcing for your specific Therma-Tru model
- Removal and disposal of failed flashing, sealant, or damaged trim
- Installation to manufacturer spec, with a water test on completion
- Written line-item quote and fixed pricing
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some things an Irvine owner can safely check. You can look for visible gaps in the flashing from the ground with binoculars, check for dampness at the threshold after a rain, and visually inspect the sealant line at the door head. That tells you whether there’s a problem worth a call.
Where it goes wrong: climbing onto a roof to inspect or repair flashing is a fall hazard, and working around a door head near a roof edge raises the risk. Sealing over a failed flashing without diagnosing the actual water path is the most common DIY mistake we see, and it usually makes the problem worse by trapping moisture behind the new sealant. The correct fix is to remove and reflash the transition, not to cover it.
Call us at (888) 578-4462 and we’ll schedule a free estimate. Calls are answered by a live person 24/7, and our technicians are background-checked and arrive in uniform.
FAQs
How long does a Therma-Tru door-to-roof flashing last in Irvine? With proper installation, a well-flashed Therma-Tru door head should hold 15 to 20 years before sealant needs renewal, though our dry summers followed by concentrated winter rain accelerate wear on exterior sealant. Call (888) 578-4462 for an exact assessment.
Can the flashing or threshold be repaired instead of replaced? Yes, in most cases. If the damage is isolated to the flashing or threshold pan, a repair runs $400 – $1,800 and doesn’t require a new roof. We diagnose the water path first and only recommend replacement when the door system itself has failed.
How long does the swap take? Flashing and threshold repairs are typically done in a single visit. If a roof section needs replacement, expect one to three days depending on the area. We’ll give you a clear schedule with the estimate.
How do you source the part for my Therma-Tru model? We use the model number from your door’s jamb label plus rough opening measurements to match the correct Therma-Tru threshold, sill pan, or head flashing. If the label is missing, we measure and identify the series, then order the matching OEM part. We don’t carry parts on trucks.
We also service KraftMaid, Cambria, and Silestone cabinetry and countertops if your home project spans more than the entry.
Get a Straight Answer on Your Therma-Tru Door Leak
A leak around a Therma-Tru door in Irvine is worth diagnosing sooner than later, because water behind trim does more damage with every storm. We’ve proudly served local communities for over 42 years, and our 730-Day Done Right Promise backs every install in writing. Groundwork Construction Co. of Irvine handles the work from foundation to finish line, with live person, 24/7 call answering and 0% financing for 18 months on qualifying projects. Call (888) 578-4462 to schedule your free estimate, and if the project runs over $10,000, you’ll get $1,000 off.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.