Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ViewLux Driveway & Pavers: The Irvine Owner’s Guide
We install ViewLux-compatible driveway and paver systems throughout Irvine, and a full paver driveway install runs $7,000 – $18,000 depending on square footage, base prep, and the pattern you choose. Concrete driveways land at $4,500 – $12,000, and driveway replacement at $5,000 – $14,000. These are planned projects, not emergency calls, so expect a scheduled install rather than same-day work. Owners usually discover a failing driveway or paver surface the same way: a hairline crack that spreads after a wet winter, a paver that rocks when the car rolls over it, or a low corner of the driveway that holds a puddle long after the rest of the street has dried. Once one section moves, water gets underneath and the failure accelerates. Irvine’s clay-heavy soil and the seasonal shrink-swell cycle make that progression faster here than in most of Southern California.
Which ViewLux Models This Applies To
ViewLux builds driveway and paver product lines across several surface profiles, and the right material depends on which line your existing install used. The most reliable way to identify what you have is to pull a loose paver or read the stamp on the underside of a corner unit, which typically carries a series marking and a thickness callout. Standard residential pavers run 2 3/8 inches thick for foot traffic and 2 3/4 inches or thicker for driveways that see vehicle loads. If you can’t find a stamp, measure the actual face dimensions and note the joint width – matching a discontinued profile by eye alone is how homeowners end up with a visible patch that never blends. On the OEM-versus-aftermarket decision: ViewLux OEM pavers give you an exact color and dimension match, while quality aftermarket equivalents from manufacturers like Belgard can save 15 – 25% and often offer a wider color palette. For a partial repair, matching the original matters most; for a full replacement, the aftermarket route is usually the smarter spend. We’ll tell you which situation you’re in after we see the surface.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ViewLux Driveway & Pavers Is Failing
- Pavers that rock or shift underfoot. The bedding sand has washed out or the base wasn’t compacted to depth. Once a unit moves, the joints open and water pours straight into the base.
- Cracks that follow a straight line across concrete. Usually a control-joint failure or root heave from a nearby tree. Irvine’s mature street trees push roots under driveways more often than people expect.
- Puddling or a sunken corner after rain. The subgrade has settled unevenly. Standing water is the leading cause of freeze-thaw and shrink-swell damage in this climate.
- Efflorescence – white chalky haze on the surface. Mineral salts wicking up through the paver. Sometimes cosmetic, sometimes the sign of a moisture problem underneath that needs the base checked.
- Joint sand washing out within a season. The joint sand was under-filled or the wrong grade was used. Missing sand lets pavers loosen and weeds take hold.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A ViewLux-compatible paver driveway install in Irvine runs $7,000 – $18,000. The range is driven by square footage, how much base excavation is needed, drainage corrections, and the pattern and border detail. Concrete driveway install comes in at $4,500 – $12,000, asphalt paving at $3,500 – $9,000, and driveway replacement – tear-out of the old surface plus new – at $5,000 – $14,000. Driveway sealing is a separate, smaller line item at $250 – $700. Every quote we write is line-item and upfront, so you see the base prep, materials, and labor broken out before anything starts. The number you see is the number you pay. All of it is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
DIY or Call Us?
You can safely handle the inspection side yourself: photograph the failed section, check for puddling after a rain, measure a loose paver, and note any weeds pushing through joints. That information helps us quote accurately. Where DIY goes wrong is base prep. A paver driveway lives or dies on six to eight inches of properly compacted aggregate base, and hand-tamping a wheelbarrow of gravel into a hole doesn’t get you there. We’ve seen plenty of Irvine driveways where a homeowner patched a sinking section and it failed again within a year because the subgrade underneath was never corrected. Concrete work carries its own risks too – fresh concrete is caustic, and a bad pour with the wrong slope sends water toward the house. If your driveway is moving, puddling, or cracking in more than one spot, call us at (888) 578-4462 and we’ll take a look before you spend on a patch that won’t hold.
FAQs
A properly installed paver driveway typically lasts 25 – 30 years or more in Irvine’s climate, and individual pavers can be replaced without tearing out the whole surface. Longevity depends far more on base prep and joint sand maintenance than on the paver itself. Call (888) 578-4462 for an honest assessment of what your existing install needs.
Often yes – if the failure is isolated to a section and the surrounding base is sound, we can lift the affected pavers, correct the base underneath, and relay them. Full replacement makes more sense when movement is widespread or the base has failed across the whole footprint. A free estimate will tell you which one you’re looking at.
Most paver driveway installs run several days from tear-out to final sanding, depending on square footage and site access, and concrete needs additional cure time before you drive on it. We schedule the work and give you a clear timeline in writing before we start. Call (888) 578-4462 to get your project on the calendar.
We source through our curated network of verified brand partners, matching your existing ViewLux profile or specifying the closest quality equivalent when a line is discontinued. We’ll walk you through the match before you commit to anything. We’re an independent service provider and not affiliated with ViewLux – we simply know the product lines and how to work with them.
We also service KraftMaid, Cambria, and Silestone on the interior side of the house, so if your project grows once we’re on site, you’re already working with a team that handles it from foundation to finish line. Every job is staffed by background-checked, uniformed technicians, and our technicians have up to 12 years of experience with driveway and hardscape work. Calls are answered by a live person, 24/7 – no voicemail, no waiting until Monday. Ready to price your Irvine driveway? Call Groundwork Construction Co. of Irvine at (888) 578-4462 to schedule your free estimate and design consult. Projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months is available.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.