Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Kitchen Remodeling: The Irvine Owner’s Guide
If your Ameristar kitchen is showing its age, we handle furniture-grade cabinet repair, refacing and full kitchen remodeling work for Ameristar-installed homes across Irvine, and typical installed kitchen remodels here run $14,000 to $45,000 depending on scope. Smaller refreshes like a cabinet and countertop swap land closer to the low end. Ameristar cabinetry was common in Irvine tract homes built through the 1980s and 1990s, so we see a specific pattern: doors that closed fine two years ago now drag on the bottom rail, drawer boxes separate at the dado joint, and the particleboard behind the hinge plate crumbles into sawdust when you touch it. That’s usually how owners find us.
Which Ameristar Models This Applies To
Ameristar isn’t one cabinet line. It’s a brand that supplied several product families over the decades, and the construction differs enough that the repair path changes with it. Most Irvine homes we open up fall into three groups: framed oak and maple cabinets from the late 1980s and early 1990s (solid wood face frames, plywood or particleboard boxes), thermofoil-wrapped doors from the mid-1990s (a vinyl skin over MDF, prone to peeling at the edges), and later laminate-face cabinets where the box is fine but the door skins delaminate.
Before you order anything, find your cabinet label. It’s usually a paper sticker on the inside of the sink base door or stapled to the back of a drawer box, and it lists the series and door style. Measure the opening, the door overlay and the hinge cup bore (35mm is the modern standard, but older Ameristar doors used smaller bores). That last detail is the compatibility gotcha most homeowners miss: a 35mm hinge won’t seat in an old 26mm cup without a boring jig and a steady hand.
For Irvine kitchens we generally steer toward quality aftermarket door and drawer fronts over chasing discontinued Ameristar OEM parts, because the original suppliers have moved on and “new old stock” from a reseller often means a door that’s been sitting in a hot warehouse. Our partner lines, KraftMaid among them, can be matched to your existing face frame color and profile so the whole kitchen reads as one.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Kitchen Remodeling Is Failing
- Doors dragging on the bottom rail: the hinge plate screws have stripped out of the particleboard behind them, or the door has warped from years of steam near the range. Both are fixable, but a stripped screw hole in old board won’t hold a bigger screw for long.
- Thermofoil peeling at door edges: the vinyl skin has shrunk and lifted, usually near the dishwasher and sink where humidity swings hardest. Once it lifts, it doesn’t lay back down; the door skin has to be replaced or refaced.
- Drawer boxes separating at the corner: Ameristar drawer boxes were assembled with glue and staples, and Irvine’s dry summers and humid coastal air over the Tustin hills work that joint loose over 20 to 25 years. A box that wobbles when you pull it is close to failing.
- Soft or crumbling cabinet floor under the sink: slow leaks around the disposal flange and trap saturate the board from underneath. If a screwdriver sinks in with light pressure, the cabinet floor needs replacing, not sealing.
- Sagging shelves and bowed cabinet bottoms: the original shelf pins have wallowed out their holes or the adjustable shelf was overloaded with cast iron and stoneware. Lighter-duty Ameristar shelf construction has a real weight ceiling, and it’s lower than most people load it to.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what cabinet and kitchen work runs in Irvine, installed, with parts and labor in one upfront number:
| Scope | Installed range |
|---|---|
| Cabinet installation (full run) | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Full kitchen remodel | $14,000 – $45,000 |
| Smaller kitchen remodel | $9,000 – $20,000 |
What pushes you toward the top of a range: cabinet count, whether we’re refacing versus replacing boxes, specialty corner configurations, and countertop material (quartz and stone move the number more than laminate). What keeps it down: keeping your existing layout and reusing the boxes where the structure is sound. You get a written line-item quote before anything starts, so the number you see is the number you pay. Every kitchen we finish is covered by our 730-Day Done Right Promise.
DIY or Call Us?
There’s real ground you can cover yourself. Tighten hinge screws, swap pulls, replace a single drawer box with a pre-made aftermarket unit, and seal the cabinet floor under the sink with an oil-based primer to slow moisture creep. Those are reasonable weekend jobs.
Where it goes wrong is structural. Refacing requires dead-flat doors, precise veneer cuts and a face frame that’s still square, and a kitchen that’s even a quarter inch out of plumb will show it in every seam. Ripping out and reinstalling full boxes means disconnecting the sink, disposal and sometimes a gas line to the range, and that’s where a homeowner gets into trouble. If gas is involved, stop and call a licensed pro. Our cabinet and remodel crews bring years of finish-carpentry experience, arrive in uniform and are background-checked, and we quote the whole job upfront so there’s no mid-project surprise. Call us at (888) 578-4462 for a free estimate and design consult.
FAQs
Expect 20 to 25 years for the original boxes and longer for solid wood doors, with the thermofoil and particleboard components failing first because humidity wins that race. In Irvine, the bigger factor is our swing between dry inland heat and coastal moisture, which speeds up glue-line failure in drawer boxes and peels the vinyl at door edges. If your cabinets are past that window, a targeted reface often buys another decade. Call us at (888) 578-4462 for a free estimate on what your Ameristar setup actually needs.
Often yes, if the boxes are solid and only the doors, drawers and hardware have failed, and a reface or door-front swap can save most of the cost of a full replacement. The decision point is the cabinet floor and sides: if the board is sound under the sink and the frames are square, repair is the honest answer. If the boxes are water-damaged or falling apart, patching won’t hold. Call (888) 578-4462 and we’ll tell you which category you’re in at no charge.
A door-and-drawer-front reface is typically a couple of days, while a full cabinet replacement with countertop and backsplash runs one to two weeks depending on size and material lead times. The wait is almost always countertop fabrication, not the installation itself. Your written schedule comes with the quote, so you’ll know exactly which days we’re in your Irvine kitchen. Call (888) 578-4462 to get that timeline for your specific layout.
We match to your existing Ameristar series using the label and measurements, then source through our partner cabinet lines when OEM stock is gone, which it usually is. That means your new fronts match your old frames in profile and finish instead of a parts-bin guess. We also work with KraftMaid, Cambria and Silestone for cabinets and counters. Call (888) 578-4462 and we’ll confirm what’s available for your model.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.