A Groundwork company - serving Irvine, CA

Ameristar Driveway & Pavers in Irvine, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Ameristar Driveway & Pavers: The Irvine Owner’s Guide

We install and repair Ameristar-compatible driveway and paver systems throughout Irvine, with paver driveway installation running $7,000 – $18,000 and concrete driveway installation at $4,500 – $12,000. Most Irvine owners discover a failing Ameristar system the same way: a section of pavers heaves after a hard rain and won’t settle back, or a hairline crack in a retaining edge keeps widening with each seasonal swing. Because Irvine’s clay-heavy soils expand and contract through our dry summers and wet winters, an edge that wasn’t set on a proper base won’t hold. Groundwork Construction Co. of Irvine is an independent service provider and is not affiliated with Ameristar. Quoting is done from your actual driveway measurements, not a square-foot guess.

Call (888) 578-4462

Which Ameristar Models This Applies To

Ameristar’s paver and driveway edge products are commonly sold through the models carried at big-box and masonry suppliers, and part numbers change by series and by finish. The first real check is the label or stamp on the underside of an edge restraint, a step face, or a loose retaining block: the series code printed there tells you the exact profile and the compatible replacement. Without that code, anyone matching a part is guessing. Owners who can’t find it should measure the thickness, width, and the depth of any interlock lip and compare that against the current Ameristar catalog.

OEM vs aftermarket is a real decision. An OEM Ameristar replacement gives you the exact interlock face and the same color or finish so the repair blends into the existing field. A quality aftermarket paver or edge restraint can cost less, but profile and radius differences show up quickly, especially on a curved apron or a transition at a driveway-to-walkway joint. For a single failed paver or a short run of edge, matching the OEM profile is usually worth the small premium. For a larger renovation where you’re replacing the whole driveway, finish-matching matters more than brand-matching, and that’s where we quote it honestly.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Ameristar Driveway & Pavers Is Failing

Watch for these before a small repair becomes a full replacement.

  • Heaved or rocking pavers after rain. Water is pooling under the base course and pushing the paver up. This almost always traces to a compacted base too thin for the soil conditions, or a missing edge restraint letting the field spread.
  • Widening cracks along the edge restraint. The edge is separating from the driveway field. Left alone, sand washes out of the joints and each paver in the row loosens in turn.
  • Sand constantly washing out of the joints. The joint sand is failing faster than the pavers. A drive with weak edges sheds sand with every irrigation run and rainstorm.
  • Sinking sections over a utility trench. Old trench lines backfilled with loose soil settle at a different rate than the surrounding drive. This reads as a soft dip or a low corner where water sits.
  • Weeds through the joints and a spongy feel underfoot. Organic matter has infiltrated the base. This is common on older Irvine driveways where the original base was never stabilized.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing in Irvine ranges from $7,000 – $18,000 for a full paver driveway installation, and driveway replacement runs $5,000 – $14,000; sealing alone is $250 – $700. What drives the number up: base excavation depth, the amount of failed edge restraint that needs rebuilding, and tear-out of an old concrete or asphalt surface. What keeps it lower: a sound base that only needs a new surface and fresh joint sand. We quote the real cost broken out line by line, so you see what the materials, the base prep, and the labor each cost. No-hassle upfront pricing, and 0% financing for 18 months plus $1,000 off projects over $10,000 applies to qualifying jobs.

DIY or Call Us?

A homeowner can safely pull up a loose paver, rinse it, and look at the sand and base under it. You can also photograph the stamp on the underside and measure surface dimensions. The line where DIY goes wrong on a driveway is the base and the edge: resetting pavers over a soft base without re-compacting it puts the same failure back in place by the next wet season, and a loose edge restraint can’t be repaired with surface patch alone. Fresh edge repairs also need the surrounding pavers re-bedded, which is fiddly without the right compacter and joint sand. If you want it right the first time, call Groundwork Construction Co. of Irvine at (888) 578-4462 for a free estimate.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch