Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Fence Installation: The Irvine Owner’s Guide
Jerith fence installation in Irvine typically runs $3,500 to $9,000 for a standard residential run, and most of that work is scheduled rather than same-day because Jerith panels and posts have to be matched to your exact model line before anyone digs. If your Jerith ornamental aluminum fence has a leaning post, a gate that drags, or a powder-coated rail with rust bleeding through, you’re in the right place. Most Irvine owners notice the problem after a Santa Ana wind event or when they finally try to latch a gate that’s been off for months. These fences are built well, but the parts that fail are predictable, and knowing which one you’re dealing with saves you from paying for a full replacement you don’t need.
Which Jerith Models This Applies To
Jerith builds ornamental aluminum fencing in several residential series, and the parts aren’t interchangeable across all of them. The key differences come down to rail spacing, picket width, post size, and how the panels attach. Jerith’s “Traditional” and “Regency” style lines use different picket spacings and rail profiles, and a gate hinge or post cap sized for one won’t seat correctly on the other. Before you order anything, find the model tag, usually a small sticker or stamped mark on the inside of a post or a bottom rail, then measure your post face and rail height. Those two numbers narrow it down fast.
On the OEM-versus-aftermarket question, our honest take: for structural parts like posts, rails, and hinges, stick with Jerith-compatible OEM or a manufacturer-spec equivalent, because the powder-coat finish and alloy thickness match the rest of the run. For fasteners, post caps, and finials, quality aftermarket is fine and cheaper. We’re an independent installer and not affiliated with Jerith, so we source to spec rather than selling you a brand name. If you’re also reworking interiors, we handle KraftMaid, Cambria, and Silestone cabinetry and countertop work too, but fencing is its own trade and we treat it that way.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Fence Installation Is Failing
- Posts leaning or pulling out of the ground. Irvine’s clay-heavy soil expands and contracts with our wet winters and dry summers, and a post set in shallow concrete eventually works loose. This is usually a footing problem, not a fence problem.
- A gate that sags or won’t latch. Gate hinges carry the full weight of the leaf and wear faster than any other part on the fence. Once the hinge pin wears, the gate drops and drags on the ground or the strike post.
- Rust bleeding through the powder coat. Coastal humidity and irrigation overspray get into a scratched or chipped finish and start corrosion underneath. Left alone, a small chip becomes a compromised rail.
- Loose or missing pickets and fasteners. Vibration from wind and normal use backs out screws over time. A picket that wobbles is a fast fix now and a bent panel later.
- Bent rails after wind or impact. Santa Ana winds and the occasional vehicle or landscaping mishap bend aluminum panels that don’t spring back. A single bent panel can often be swapped without touching the rest of the run.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Jerith-compatible repair or partial replacement in Irvine, most jobs land in the $3,500 to $9,000 range for a full residential run installation, and smaller repairs sit well below that depending on how many posts need resetting and how many panels get swapped. What drives the number: linear footage, post count and whether footings need re-pouring, gate hardware, and finish color matching. We quote parts and labor as separate line items so you can see exactly what the part costs versus the install. Every job carries our 730-Day Done Right Promise, and the number you see on the upfront quote is the number you pay, with no change-order surprises. Financing at 0% for 18 months is available, plus $1,000 off projects over $10,000.
DIY or Call Us?
Some of this you can safely check yourself. Walk the run and note which posts lean, measure your post face and rail height for model identification, and tighten any visibly loose fasteners with a screwdriver. Where DIY goes wrong: resetting a post footing. Aluminum posts sitting in concrete carry real tension, and a post that lets go while you’re working around it can swing a gate leaf or dump a panel on you. That’s a two-person job with the right bracing, not a Saturday project. If a post is loose, a gate is sagging, or you can’t confirm the model, call us at (888) 578-4462 and we’ll walk you through what you’re looking at.
FAQs
How long does a Jerith aluminum fence last in Irvine? A properly installed Jerith fence with an intact powder-coat finish will hold up well past 20 years in Irvine’s climate, though posts and gate hinges are the first to show wear. The finish does the heavy lifting, so touch up chips early. Call (888) 578-4462 for an assessment if you’re unsure of your fence’s condition.
Can it be repaired instead of replaced? Yes, in most cases. A single bent panel, a worn hinge, or a loose post can usually be repaired or partially replaced without tearing out the whole run. A licensed installer can tell you within minutes whether repair or replacement makes financial sense. Call (888) 578-4462 for a free estimate.
How long does the swap take? A single panel or hinge replacement is typically a same-visit job, while a post reset or a longer run takes a scheduled half-day to full day depending on footings. We’ll give you a realistic window in the quote, not a guess. Call (888) 578-4462 to schedule.
How do you source the part? We match your Jerith model line and measurements to a Jerith-compatible part, quoting OEM or manufacturer-spec equivalents with the finish and alloy that match your fence. We don’t stock parts or carry them on a truck, so we source to your specific model. Call (888) 578-4462 and have your model tag or measurements ready.
Ready to get your Jerith fence sorted? Call Groundwork Construction Co. of Irvine at (888) 578-4462 for a free estimate. Live person, 24/7, and upfront pricing with no surprises, backed by our 730-Day Done Right Promise. From foundation to finish line, built to last and backed in writing.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.