Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Driveway & Pavers: The Irvine Owner’s Guide
Quick answer: We install and repair Jerith-compatible driveway and paver systems in Irvine, and a typical paver driveway installation runs $7,000 – $18,000 installed, with most jobs completed in a single visit once the material is on site. Owners usually call us for one of two reasons: a Jerith paver has cracked or heaved out of level after a few seasons, or the base beneath a section has started to settle and the pavers rock when you walk on them. Estimates are free, the pricing is upfront with no surprises, and every job carries our 730-Day Done Right Promise.
Which Jerith Models This Applies To
Jerith is a name most Irvine homeowners recognize from fence and outdoor product catalogs, and the driveway and paver products that carry it share the same family of profiles. We work with the standard paver formats and the driveway-border and jointing components that go with them. Matching the right part starts with identification, not guessing.
- Read the label. Jerith products usually carry a stamp or tag on the underside or the edge of the piece. A photo of that label, plus a tape measure across the face, tells us which profile you have.
- Measure, don’t eyeball. Paver thickness varies by profile, and a piece that’s a few millimeters off won’t lock into the joint correctly. Bring us the exact dimensions and the surface finish.
- Match the color run. Color lots shift between production runs. If only a few pavers need replacing, we tell you honestly whether a new run will blend or whether it makes more sense to swap a full section so the change isn’t visible.
On the OEM-versus-aftermarket question: for standard paver formats, a quality equivalent that matches thickness, color, and joint geometry performs as well as the original, and it usually gets the repair done faster. For border and edge pieces with a specific profile, the Jerith-sourced part is the better call. We’ll tell you which side of that line your repair sits on before you spend anything.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Driveway & Pavers Is Failing
Pavers fail predictably, and the symptoms point to the cause. Here’s what we see most often in Irvine.
- Pavers rocking underfoot. The base layer has settled or washed out. That movement grinds the edges of each paver against its neighbors, so the rocking gets worse the longer you wait.
- Sand washing out of the joints. Joint sand is supposed to stay put. When it disappears, water is getting under the field and moving the base material. In Irvine’s dry spells followed by heavy winter rain, that cycle shows up fast.
- Cracked paver faces. A crack that runs across the face usually means the piece is moving on a soft spot beneath it, not that the paver itself was defective. Replacing the paver without fixing the base underneath just cracks the next one.
- Visible heaved or sunken sections. Look down the driveway after a rain. Any dip that holds water, or any hump that catches a car tire, is a base problem in progress.
- Efflorescence and haze. White cloudy patches on the surface are salts working out of the concrete. Sometimes it’s cosmetic and seasonal. Sometimes it signals water moving through the material where it shouldn’t.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how our Irvine pricing breaks down. We quote line items, not a lump number, and the number you see is the number you pay.
| Scope of work | Installed price range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Driveway replacement | $5,000 – $14,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway sealing | $250 – $700 |
What moves you within a range: square footage, how much base has to be reworked versus replaced, whether the existing edging can be reused, and the profile and color lot you choose. A single-section repair lands at the low end; a full driveway rebuild lands at the top. Labor, base prep, joint sand, and cleanup are all in the quote. The work carries our 730-Day Done Right Promise, and we don’t hand off fine print.
DIY or Call Us?
You can absolutely handle the inspection. Walk your driveway after rain, mark the low and high spots, photograph the label on a failed paver, and check whether the joint sand is off-level with the paver faces. That information makes a quote faster and more accurate.
Where DIY goes wrong: pulling up pavers to check the base is easy to get wrong and hard to reset. Once the field is disturbed, the interlock is gone, and a section that isn’t relayed correctly will move within a season. Base rework is the part that decides whether a repair lasts five years or five months, and it’s not a weekend project. The same goes for any piece of the system tied to a retaining edge, where a wrong fix shifts load onto the adjacent structure.
Call (888) 578-4462 and we’ll talk through what you’re seeing. A live person answers around the clock, and the estimate is free.
FAQs
A properly installed paver surface in Irvine’s climate runs 25 to 30 years before it needs more than maintenance, though that lifespan depends almost entirely on the base, not the paver. Irvine’s dry season and the heavy rain months that follow are what stress the base first, so we look underneath before we quote a surface repair.
Often, yes. A localized repair on a few square feet, where the base is still sound and the color run matches, saves real money over a full replacement. We’ll tell you which one applies once we’ve inspected the base, and we’ll put the pricing in writing so you can compare.
A single-section repair is usually done in one visit. A full driveway installation takes longer and depends on how much base prep is required, which we scope out at the estimate. We schedule around your access needs so you’re not stuck without a usable driveway.
We identify your Jerith profile from the label and measurements, then source the closest available match, OEM or quality equivalent, depending on what your repair actually needs. Parts aren’t carried on our trucks, so we confirm the correct piece before we arrive. We’re an independent service provider and not affiliated with Jerith, but our technicians have up to 12 years of experience matching parts to installed systems, and we also work with other premium lines including KraftMaid, Cambria, and Silestone on the interior side.
If your driveway is failing, call (888) 578-4462 for a free estimate. Upfront pricing, no surprises, and a live person on the line any hour of the day.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.