Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Driveway & Pavers: The Irvine Owner’s Guide
We install Unilock-compatible driveways and paver systems across Irvine, with hardscape projects typically landing between $7,000 and $18,000 depending on square footage, base prep, and the specific Unilock series you choose. Because Irvine sits on clay-heavy soils that expand and contract with our wet winters and dry summers, base failure is the most common reason we get called out, not surface wear. Most Irvine owners discover a problem the same way: a paver in the driveway rocks underfoot, a hairline crack spreads across a walkway, or the edge course starts creeping toward the street after a rainstorm. That shifting is your first sign the base or edge restraint has given way, and it rarely fixes itself.
Which Unilock Models This Applies To
Unilock makes several distinct paver systems, and each one has its own failure points and replacement method. Brussel’s Block, Holland Stone, and Beacon Hill are the three you’ll most often see on Irvine driveways, and they behave differently. Brussel’s Block has a thicker profile and interlocks well under vehicle traffic; Holland Stone is the classic 60mm workhorse; Beacon Hill is a tumbled, more decorative option that shows edge chipping faster when the base is unstable. Unilock’s permeable line (Techo-Bloc and similar systems aside) uses specific joint aggregate that must be replaced with the same grade or the drainage path fails quietly. If you’re trying to identify your series, look at the color and texture: Holland Stone is a uniform rectangular shape with a flat face, Beacon Hill has softened, tumbled edges, and Brussel’s Block shows a larger format with a subtly varied surface. When the original install predates the current owner, we size-match against the existing course rather than guess. For OEM precision, Unilock’s own replacement guidance is a useful reference; quality aftermarket pavers that meet the same ASTM freeze-thaw and compressive-strength spec (roughly 8,000 psi for standard concrete pavers) install interchangeably, which is often the better move when the original color has been discontinued. If you’re also sourcing kitchen finishes, we work with KraftMaid, Cambria, and Silestone in other trades, but driveway work stays on the hardscape line.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Driveway & Pavers Is Failing
- Paver rocking or “oil-canning.” When a paver dips underfoot and springs back, the bedding sand has washed out or the base aggregate has compacted unevenly. In Irvine this typically traces back to thin base prep over expansive clay.
- Edges shifting outward. If your driveway edges are creeping toward the street or into the planter, the edge restraint has failed. In Irvine, a missing or undersized plastic edge restraint combined with root intrusion is the usual culprit.
- Weeds and sand loss in the joints. Persistent weeds and sand washing out of open joints mean the joint aggregate is gone or the wrong grade was used. The paver isn’t failing, but the joint system is, and that opens the door to water penetration.
- Cracks in pavers (not between them). A cracked paver usually means a hard point under it: an uneven base, a rock, or a tree root pushing up. Isolated cracks are a single-paver swap; spreading cracks signal base failure.
- Standing water after rain. Puddles that linger for hours mean the surface drainage grade is off or the base is holding water. In Irvine’s clay soil, that trapped moisture accelerates settling and frost heave over time.
Replacement Cost & What’s Included
A full Unilock paver driveway install in Irvine runs $7,000 to $18,000, and replacement work after base failure typically tracks the higher end because it requires removing existing pavers, re-excavating the base, and re-compacting. Paver patio installs run $3,500 to $11,000. What drives the range: square footage, whether base and sub-base both need rework, edge restraint replacement, and the specific Unilock series. We write line-item quotes that itemize pavers, base aggregate, edge restraint, joint aggregate, and labor separately, so you see exactly what you’re paying for; there are no change orders for items that were visible during the estimate. Every install is covered by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things without touching anything structural: photograph the failing area, measure the paver dimensions (a tape measure across the long edge confirms the size), note whether the failure is single-paver or across a course, and check whether water pools after a hose test. What we don’t recommend is pulling base layers or re-compacting by hand, because the base is where 90% of paver failures start, and a hand tamp on a half-inch of sand won’t hold up to Irvine clay movement. The work itself is heavy and the tooling matters, so the honest call is to let a trained crew handle it. If you’re not sure whether it’s a single paver or a base issue, call us at (888) 578-4462 and we’ll tell you straight.
FAQs
A properly installed Unilock paver driveway lasts 25 to 50 years, and the pavers themselves often outlast the base. The failure point in Irvine is almost always the base, not the paver. Call (888) 578-4462 if yours is showing movement and we’ll give you an honest read.
Yes, if the failure is isolated, a single-paver or small-area repair can restore function in a single visit, and we’ll tell you plainly if that’s the better option. If anything more than 20% of the surface is moving, base repair or replacement is the more cost-effective path.
Small repairs can be completed in a single visit, typically half a day to a full day. Full driveway replacement typically takes three to six working days depending on square footage and drying time.
We match against the existing pavers by measuring thickness and dimensions, then confirm the exact series against Unilock’s current product line or a spec-compatible equivalent. If your original color is discontinued, we show you the closest matches before ordering.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.
Get a Straight Answer on Your Unilock Driveway in Irvine
Whether you’re looking at a single wobbling paver or a full replacement, we’ll give you an upfront estimate with line-item pricing and a 730-Day Done Right Promise behind the work. We’re an independent installer and not affiliated with Unilock, so every recommendation is based on what’s actually best for your Irvine property. Call (888) 578-4462 to schedule your free estimate today.