Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Kitchen Remodeling: The Irvine Owner’s Guide
Unilock kitchen remodeling in Irvine typically runs $14,000 to $45,000 installed, and the work is scheduled in planned phases, not squeezed into a single day. Owners usually land on this page mid-project, when a material or finish from the Unilock specification stops behaving: a grout joint opening at the counter edge, a floor tile sounding hollow underfoot, or a backsplash that has started to lift behind the range. We install and repair Unilock-compatible kitchen work across Irvine and can tell you within one visit whether you’re looking at a repair or a replacement. Groundwork Construction Co. of Irvine is an independent service provider and is not affiliated with Unilock.
Key Takeaways
- Most Unilock kitchen failures in Irvine trace back to moisture, thermal movement, or substrate prep, not the tile itself.
- Installed kitchen remodeling for Irvine homes prices from $14,000 to $45,000 depending on scope.
- Single-surface repairs (backsplash, a run of floor tile) are smaller jobs; full replacements get a written line-item quote.
- Every job carries our 730-Day Done Right Promise, and calls reach a live person 24/7.
Which Unilock Models This Applies To
Unilock makes a wide catalog, and the part you need depends on which line is actually in your Irvine kitchen. The company’s offerings range from structural pavers and retaining wall systems to permeable and textured finishes, and the kitchen applications you’ll find in Irvine homes usually involve a specific product family named on the original spec sheet. Before you order anything, find the product name and the nominal dimensions. Pull a spare from the attic or garage if the installer left one, measure it, and photograph both the face and the back. A 12×24 field tile and a 16×16 tile from two different lines are not interchangeable, and the box label often carries a dye-lot or batch code that matters for color match.
That’s the OEM-versus-aftermarket decision for Unilock. Getting the exact current production run of the same line is the cleanest match, but supply and lead times on a discontinued line can push a homeowner in Irvine toward a close equivalent from a current Unilock family or a compatible thin-set and leveling system. We’ll tell you honestly when an identical match isn’t realistic and walk through the color and finish trade-offs before you commit. Call (888) 578-4462 with the product name and dimensions, and we’ll help you pin down what’s compatible.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Kitchen Remodeling Is Failing
- Hollow sound underfoot. A drummy tile means the thin-set didn’t bond fully or the substrate flexed. In Irvine’s slab-on-grade kitchens, this often shows up where a floor transitions to a different material.
- Grout cracking in straight lines. Movement, not bad grout, is the usual culprit. If the cracks follow a seam or a joist line, the subfloor or backer board is moving.
- Backsplash lifting behind the range. Heat and moisture from cooking break down an adhesive that wasn’t rated for the spot. This is common above gas ranges in Irvine kitchens.
- Efflorescence or dark grout lines. White powder or darkened joints point to moisture working behind the surface. Check for a slow leak or a missing seal at the counter edge.
- Lippage at the counter or island edge. Uneven edges mean the substrate wasn’t flattened before install. It’s a prep problem, and the fix is usually re-setting the affected run, not the whole floor.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed kitchen remodeling in Irvine falls in the $14,000 to $45,000 range for a full scope. Line-item pricing runs roughly $4,000 to $13,000 for cabinet installation, $2,000 to $6,500 for countertop installation, $800 to $2,500 for a backsplash, and $3,000 to $10,000 for a kitchen island. A small kitchen remodel sits at $9,000 to $20,000. What drives the range is substrate condition, whether the layout changes, and the finish you choose. We quote parts and labor separately so you can see exactly what the Unilock-compatible material costs versus the installation. Every job is backed by the 730-Day Done Right Promise, and the written quote includes the numbers you’ll actually pay, with no change orders sneaking in mid-job.
DIY or Call Us?
You can safely check a few things yourself: tap the surface for hollow spots, look for cracked or darkened grout, and pull the spare tile and label so you know exactly which Unilock line you have. What goes wrong in DIY is the layer underneath. Cutting and re-setting tile or material over a substrate that’s out of flat will fail again, and a backsplash behind a range involves adhesive and heat ratings most homeowners don’t have on hand. That’s where a trained setter earns their keep. If the repair is small and prep is sound, we’ll tell you. If it needs a proper tear-out and re-set, call (888) 578-4462 to schedule your free estimate.
FAQs
A properly set Unilock surface in an Irvine kitchen should hold up for decades, and most problems show up within the first few years when prep was skipped. Irvine’s dry summers and occasional marine moisture swings put pressure on grout and adhesive, so the installation matters more than the product lifespan printed on the box. Call (888) 578-4462 for an exact quote on your repair or replacement.
Often yes. A localized hollow tile or a short run of cracked grout can be re-set and re-grouted without tearing out the whole floor or backsplash. If the movement runs across the full surface, a partial repair just delays the failure, and we’ll say so plainly. Call (888) 578-4462 and we’ll assess it on site.
A single-surface repair is often completed in one visit, while a full kitchen scope is scheduled in phases over a longer window. The timeline depends on how much needs to come out and whether we’re matching a discontinued Unilock line. We give you the phase schedule in writing before work starts. Call (888) 578-4462 for your free estimate and a realistic timeline.
We source compatible materials through our vetted brand network and match against your Unilock product name, dimensions, and dye-lot when possible. We don’t carry stock or parts on a truck; the material is ordered to your project so you get the right match, not whatever happens to be handy. KraftMaid, Cambria, and Silestone are among the brands we also service for Irvine kitchens. Call (888) 578-4462 to start.
Planning a Unilock-compatible kitchen repair or remodel in Irvine? Call Groundwork Construction Co. of Irvine at (888) 578-4462 for a free Project Estimate & Design Consult. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and every job is covered by the 730-Day Done Right Promise. Live person, 24/7. Upfront pricing, no surprises – plus $1,000 off projects over $10,000 and 0% financing for 18 months.
Written by the team at Groundwork Construction Co. of Irvine.