A Groundwork company - serving Irvine, CA

Cambridge Pavers Windows & Doors in Irvine, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Cambridge Pavers Windows & Doors: The Irvine Owner’s Guide

We install Cambridge Pavers-compatible windows and doors across Irvine, with most replacement window and door projects landing between $4,500 and $15,000 installed. Impact-rated window installation in Irvine runs $8,000 to $25,000, since California’s wildfire zones and Irvine’s inland heat push many homeowners toward tempered, laminated, or impact glass. Most single openings are measured, quoted, and scheduled in one visit once we confirm the model and glazing spec. We’re an independent service provider and not affiliated with Cambridge Pavers.

Call (888) 578-4462

Owners usually find the problem the same way: a window that won’t stay up, a door that drags on the threshold, fog between the panes, or a seal that lets the Irvine summer heat straight through the glass. Cambridge Pavers makes the surrounding hardscape systems, and the windows and doors tied to those outdoor living projects are where the hardware starts to fail first. A stuck slider or a rotted threshold is your signal to get the opening inspected before water finds the wall.

Which Cambridge Pavers Models This Applies To

Cambridge Pavers hardware shows up on homes built with their outdoor living systems: pool decks, patios, and covered outdoor kitchens where the windows and doors interface with the paver edge and the patio door frame. The window and door itself is typically a third-party unit, so the “Cambridge Pavers part” you’re chasing is usually the frame, sill, threshold, or screen assembly where the paver system meets the opening, not a proprietary Cambridge Pavers window.

Identify your unit before you order anything. Check the glass for an etched logo and a series code in the corner, measure the rough opening in three places (top, middle, bottom) because Irvine’s stucco-and-frame construction rarely produces a perfectly square opening, and photograph the sill and threshold. For the OEM-versus-aftermarket call, Cambridge Pavers-specific trim and sill pieces are worth matching exactly when the opening sits against a paver edge, because a generic sill can’t shed water the same way. For the glass unit itself, a quality aftermarket replacement matched to the same U-factor and SHGC spec performs fine in Irvine’s climate. We also service KraftMaid, Cambria, and Silestone installations, so if a remodel touches more than the opening, one team handles it.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Cambridge Pavers Windows & Doors Is Failing

  • Fog or condensation between the panes. The insulated glass seal has failed, letting moisture in. In Irvine’s hot days and cool nights, that trapped moisture clouds quickly and kills the unit’s insulating value.
  • A door that drags or won’t latch. The threshold has shifted or the frame has settled, common where a paver patio meets the door sill and drainage pushes against the base. Left alone, it grinds the weatherstripping and lets water in.
  • Drafts or heat coming through the frame. Failed weatherstripping or a warped sash breaks the seal. Irvine summers make a bad seal obvious fast, since cool air leaks out and heat leaks in.
  • Water stains or soft wood at the sill. The flashing or sill pan under the opening has failed. This is the one that spreads into the wall and the framing if you don’t catch it.
  • A window that won’t stay open, or a broken balance. The balance or hinge hardware has worn out. The glass is usually fine; the hardware isn’t, and it gets worse with every use.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Window replacement in Irvine runs $4,500 to $15,000, and impact window installation runs $8,000 to $25,000. The range is driven by the number of openings, the glass spec (tempered, laminated, or impact-rated for Irvine’s fire and heat conditions), frame material, and whether the paver edge or sill needs reflashing. Every quote is upfront and line-itemed, so the number you see is the number you pay, with no surprise add-ons once work starts.

Here’s what an installed price covers, so you can compare bids honestly:

  • On-site measurement and model identification
  • The new unit or the matched glass and hardware
  • Removal and disposal of the old unit
  • Flashing, sill, and seal work at the opening
  • Finish work and cleanup

All of it is covered by our 730-Day Done Right Promise: if the install isn’t right, we make it right, and that guarantee is one of the longest workmanship warranties in residential construction.

DIY or Call Us?

You can safely check a few things yourself. Look for the etched series code on the glass, measure the opening, photograph the sill, and note whether the glass or just the hardware is failing. That saves time on the call.

What you shouldn’t DIY: reflashing a failed sill, pulling and resetting a full opening, or anything that touches the wall’s water barrier. A bad seal on an Irvine window or door lets water into stucco and framing, and that damage runs far past the cost of a proper install. Full replacement units are best left to a crew that measures, flashes, and seals correctly the first time, with background-checked, uniformed technicians on the job. If the hardware is the only failure, a repair is often the honest answer and we’ll tell you so. For anything structural, call us at (888) 578-4462 and we’ll give you a straight read.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch