Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Driveway & Pavers: The Irvine Owner’s Guide
We install and repair Oldcastle driveway and paver systems across Irvine, and most replacement work runs $7,000 – $18,000 for a full paver driveway (concrete driveways sit at $4,500 – $12,000). Replacement of a failed section or joint is usually handled within days of your estimate, and we hold firm, upfront pricing so the number you see is the number you pay. Groundwork Construction Co. of Irvine is an independent service provider and is not affiliated with Oldcastle.
Owners in Irvine usually find the problem the same way: a paver pops loose after a Santa Ana wind and rain cycle, a joint sand line washes out toward the street, or a hairline crack in a retaining edge turns into a wobbly corner after a hot summer. Oldcastle’s pavers and retaining-wall block hold up well in Southern California, but the base and joint system under them is what fails first. That’s the part we get called about most.
Which Oldcastle Models This Applies To
Oldcastle (now operating under the Oldcastle APG family of brands, including Belgard) makes a wide range of pavers and retaining-wall block, and matching the right piece matters more than most homeowners expect. The most common lines we see on Irvine properties are the standard 60mm and 80mm interlocking pavers, the larger-format slab pavers used on modern driveways near Woodbridge and Northwood, and Oldcastle’s segmental retaining-wall block for sloped driveways in Turtle Rock and Quail Hill.
To identify what you have, measure a single paver’s length, width, and thickness in millimeters and photograph the surface texture and edge profile. Thickness is the gotcha: a 60mm paver and an 80mm paver look similar from above but are not interchangeable, and installing the wrong thickness creates a lip that catches tires and traps water. If a label is intact, the model or color name is usually printed on the pallet band or stamped on the box. Bring that photo and measurement to your estimate and we can match the exact line.
On the OEM-versus-aftermarket question: for color matching and edge profile, sticking with the original Oldcastle line is the safe move. For base material, joint sand, and polymeric jointing, a quality aftermarket equivalent performs as well or better and costs less. We’ll tell you which is which instead of upselling the whole system.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Driveway & Pavers Is Failing
- Loose or rocking pavers. The base under the paver has settled or washed out, usually from poor drainage or a base that wasn’t compacted enough. One loose paver often means a larger pocket of instability nearby.
- Joint sand washing away. Irvine’s dry stretches followed by heavy rain push sand out of the joints toward the street. Once joints empty, pavers shift against each other and edges chip.
- Sunken or uneven sections. A dip that holds water after rain points to base failure or a settled subgrade. Left alone, water works deeper and the dip grows each season.
- Cracked or tilted retaining edge. The edge restraint is what keeps the whole field from spreading. A cracked edge on a sloped driveway lets pavers creep downhill and open gaps.
- Efflorescence and surface staining. A white chalky film or dark patches usually mean trapped moisture under the surface, sometimes from a failing sealer or poor drainage rather than the paver itself.
Replacement Cost & What’s Included
In Irvine, a full paver driveway installation runs $7,000 – $18,000. A concrete driveway replacement is $4,500 – $12,000, asphalt paving $3,500 – $9,000, and a targeted driveway replacement or section repair $5,000 – $14,000. Resealing an existing paver or concrete surface is $250 – $700 and is often the right call when the pavers are sound but the sealer has worn through.
What drives the range: square footage, whether the old surface has to be removed and hauled, base depth and compaction, drainage corrections, and edge restraints. The price includes removal, base prep, compaction, the paver material, joint sand, and cleanup. Labor and material are quoted as separate line items so you can see exactly where the money goes. Every job is backed by our 730-Day Done Right Promise, so if the workmanship fails, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself. Walk the driveway and note which pavers rock underfoot, hose it down and watch where water pools, and photograph any cracked edge restraints. Replacing joint sand on a small area is a reasonable weekend job for a careful homeowner.
Where DIY goes wrong is the base. Pulling a paver at the edge can open a pocket that lets water under the field and turns a small repair into a full re-lay. Cutting and setting edge restraints on a sloped Irvine driveway is also harder than it looks; a bad edge lets the whole field creep. If pavers are rocking or the surface is dipping, that’s the point to call us at (888) 578-4462. Estimates are free, and we’ll tell you honestly whether you need a patch or a full replacement.
FAQs
A properly installed Oldcastle paver driveway typically lasts 25 to 30 years or more in Irvine’s climate, though the joint sand and base system need attention sooner. Southern California’s dry heat and occasional heavy rain wear the joints faster than the pavers themselves, so resealing and joint refill every few years keeps the surface intact. Call (888) 578-4462 for an exact quote on your driveway; estimates are free.
Yes, in many cases. Loose pavers, washed-out joints, and a single sunken section can often be pulled, re-based, and reset without replacing the whole driveway. Full replacement makes sense when the base has failed across large areas or the pavers are chipped and mismatched beyond repair. We’ll show you which situation you’re in before recommending anything.
A targeted repair of a few pavers usually finishes in under a day, while a full Irvine driveway replacement typically takes a few days depending on square footage and base work. Weather and access affect the timeline, but we give you a realistic schedule upfront and stick to it.
We match your paver by measuring thickness, length, and width, then matching the surface texture and color line to the original Oldcastle product. We don’t keep pavers on a truck; material is sourced to your project once we’ve confirmed the match, so the new section blends with what’s already there.
We also service other brands on Irvine driveways and patios, including KraftMaid, Cambria, and Silestone for connected outdoor and interior projects.
Get Your Oldcastle Driveway Priced Right
Whether your Oldcastle driveway needs a patch, a reseal, or a full replacement, we’ll give you a written line-item quote with no change-order surprises, plus our 730-Day Done Right Promise behind the work. Upfront pricing, no surprises. Call (888) 578-4462 and a live person will answer, 24/7, to schedule your free estimate in Irvine.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.