Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Bathroom Remodeling: The Irvine Owner’s Guide
Oldcastle bathroom remodeling in Irvine typically runs $9,000 – $28,000 for a full gut-and-rebuild, and we quote it with a written line-item price before any tile comes up. Smaller scopes like a vanity swap or a shower replacement land far lower, anywhere from $800 to $12,000 depending on what’s coming out and what’s going in. When an Oldcastle vanity, shower surround, or floor system fails, Irvine owners usually find out the same way: soft, dark grout lines around the shower pan, a vanity top that’s cracked along a seam, or a floor tile that flexes underfoot because the substrate underneath has given up. Oldcastle products are common in Irvine homes built between the late 1990s and the mid-2000s, and most of what we replace has simply reached the end of its realistic service life.
Which Oldcastle Models This Applies To
Oldcastle isn’t a single product line – it’s a family of building materials companies, and in bathrooms the name most often appears on cultured marble and cultured granite vanity tops, fiberglass shower pans and surrounds, and a run of ceramic and porcelain tile. That spread matters, because the part you need depends entirely on which one you have. On a fiberglass shower surround, the model and casting number are stamped directly into the back wall of the unit; you’ll need to pull the surround or reach behind it with a phone camera to read it. Cultured marble vanities usually have the series name molded into the underside of the bowl. Ceramic and porcelain tile don’t carry model numbers at all – the box, if you still have one, does, but after a few years it’s gone. In that case we match by dimension, glaze, and edge profile instead.
For fiberglass units, OEM replacement parts are the safer bet because the pan and surround are cast to fit each other. Aftermarket pans from other manufacturers will often fit the rough opening but not the surround’s overlap, and that gap is where water gets in. For cultured marble, aftermarket vanity tops from brands like Silestone or Cambria are a real upgrade rather than a compromise – you get a modern material at a similar or lower price point. We’re an independent service provider, not affiliated with Oldcastle, so we’ll tell you honestly when the OEM part isn’t worth chasing down.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Bathroom Remodeling Is Failing
- Grout that recedes and darkens around the shower pan. This usually means the pan itself has cracked or the membrane underneath has failed, and water is getting behind the tile. Re-grouting over it buys a few months, not a fix.
- A fiberglass floor that feels springy underfoot. In Irvine, we see this most on pans installed over a wood subfloor that took on moisture during a slow leak. The fiberglass hasn’t necessarily failed – the support under it has, and it needs to be rebuilt.
- Cracks radiating from the drain or along the pan’s low point. Cultured marble and fiberglass both crack at stress points. Once a pan cracks through, it’s leaking, and a patch kit won’t hold at the drain collar.
- A vanity top that’s chipped at the edge or separating from the cabinet. Cultured marble delaminates at the seams and chips where it overhangs. Silicone caulk hides it briefly, then the chip grows.
- Mold or efflorescence on the backer board behind the tile. This is the one most Irvine owners miss. It means the waterproofing layer has failed and the wall cavity is wet, which is a remodel scope, not a repair.
Replacement Cost & What’s Included
Bathroom remodeling in Irvine runs $9,000 – $28,000 as a full-scope number, and that’s where most Oldcastle replacement work lands once you’re into substrate, waterproofing, and tile. A small bathroom remodel comes in at $5,000 – $12,000. Isolated pieces price out lower: a shower replacement is $3,000 – $8,500, a walk-in shower install is $4,500 – $12,000, a tub-to-shower conversion is $3,500 – $10,000, and a bathroom vanity install runs $800 – $3,000. What drives the range is what’s behind the surface – whether the pan substrate is sound, whether the waterproofing is intact, and how much tile has to come out to reach it.
Every quote is a written line-item, so you see the part cost, the labor, and the disposal separately. No-hassle upfront pricing means the number you see is the number you pay. All work is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things on your own. Read the model number off the back of the shower surround with a phone camera, measure the rough opening of your pan, and photograph the crack or separation so you know what you’re dealing with. What we’d steer you away from: pulling a fiberglass pan or cultured marble top yourself. Both are usually set on a mortar bed or adhesive, and prying one out without knowing where the supply and drain lines run is how you end up with a hole in the subfloor and a shutoff valve in your hand. Water damage behind a failed surround or pan is also a hidden problem – the visible crack is often the smallest part of it. If you’re unsure what you’re looking at, call us. Live person on the line, 24/7.
FAQs
How long should an Oldcastle fiberglass shower pan or cultured marble vanity actually last? A fiberglass pan under normal use lasts about 15 to 25 years, and cultured marble tops about the same before they chip or delaminate. In Irvine’s hard water, the finish can dull noticeably by year 12, but dullness isn’t a failure – cracks, flex, and water behind the wall are. Call (888) 578-4462 for a free estimate if you’re past the 15-year mark and unsure.
Can the old part be repaired instead of fully replaced? Often yes, if the crack is small and the substrate is dry. A fiberglass pan crack or a cultured marble chip can be repaired with a casting kit when there’s no structural failure behind it. If the pan flexes or the grout keeps receding after repair, the substrate under it has failed and a patch won’t hold. Call (888) 578-4462 and we’ll tell you honestly which category yours is in.
How long does the swap take? A vanity top swap is a half-day job. A shower pan or surround replacement is typically two to three days, once the demo, substrate, waterproofing, and finish are done properly. A full bathroom remodel runs longer and depends entirely on tile and fixture lead times. Call (888) 578-4462 for a real timeline on your specific scope.
How do you source the Oldcastle part for my model? We read the casting number off the unit, match it against the manufacturer’s parts catalog by series and dimension, and quote you the OEM part alongside a quality aftermarket equivalent so you can compare. We don’t carry parts on a truck or hold local stock, so the timeline is a real number. We also service bathroom products from KraftMaid, Cambria, and Silestone if you’re exploring an upgrade. Call (888) 578-4462 for a free estimate.
Get a Written Quote on Your Oldcastle Bathroom Project
Groundwork Construction Co. of Irvine has been in business since 2014, and we’re proud to serve homeowners across Irvine and nearby areas. Our technicians have up to 12 years of experience, are background-checked, and arrive in uniform on every project. We offer no-hassle upfront pricing, 0% financing for 18 months, $1,000 off projects over $10,000, and a free project estimate and design consult. Call (888) 578-4462 to schedule your free estimate – a live person answers 24/7, and we’ll tell you straight whether your Oldcastle bathroom needs a repair or a full replacement.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.