Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Roofing: The Irvine Owner’s Guide
If your Oldcastle roof is leaking, shedding granules, or showing failed flashing, we install and repair Oldcastle-compatible roofing across Irvine. Most residential roof replacements here land between $8,000 and $20,000 installed, and targeted repairs usually run $400 to $1,800. We don’t promise same-day turnaround on a full roof – that’s not how real roofing works – but we do answer the phone live, 24/7, and we’ll get an estimator out to look at your Oldcastle system with a written, line-item quote.
Most Irvine owners find out something’s wrong the same way: a brown ring on the ceiling after a Santa Ana wind-driven rain, granules collecting in the gutter downspout, or a roofer hired for something else pointing at the ridge and saying “that’s been patched before.” Oldcastle roofing products show up on a lot of the tract homes and mid-century builds across Irvine, and the failure pattern is usually predictable once we see it.
Which Oldcastle Models This Applies To
Oldcastle’s roofing line covers concrete and clay tile, plus the underlayment and accessory components that hold a tile system together – battens, fasteners, ridge and hip closures, and the flashing profiles that make or break a tile roof in Irvine’s climate. Identifying the right part starts with the tile itself: flip a loose or broken tile over and look for the stamp on the back. Most Oldcastle tile carries a profile name and a color code there. If the stamp is worn, measure the tile’s exposed length and width and match the profile against the adjacent field – a 12-inch exposure tile will not accept a closure sized for a 9-inch one, and that mismatch is one of the most common reasons a repair leaks again within a year.
On the OEM-vs-aftermarket question: for visible tile, matching the profile and color matters because a mismatched tile is obvious from the street and from a home inspection. For underlayment, battens, and fasteners, a quality aftermarket equivalent from a known manufacturer is often a better long-term choice than tracking down an older OEM spec, because underlayment technology has moved forward. Be careful here: many “Oldcastle” listings online are actually sold as roofing supplies by distributors that source from multiple mills, and the box label won’t always say Oldcastle even when the product is compatible. If you’re matching a color, order a physical sample first.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Roofing Is Failing
Irvine’s dry summers and occasional heavy winter rain put stress on different parts of a tile roof than most homeowners expect. Here’s what actually signals a problem:
- Granules in the gutter or at the downspout outlet. On a shingle-under-tile or composition section, shedding granules mean the mat is breaking down. On a pure tile roof, look instead for tile dust at the eave – a sign of freeze-thaw or wind abrasion.
- Interior ceiling stains after a wind-driven rain. Almost always points to failed underlayment, not cracked tile. Irvine’s Santa Ana winds push water sideways under intact tile, so the tile looks fine while the felt beneath has torn.
- Lifted, cracked, or slipped tiles along the ridge and hips. Ridge and hip tiles are mortar-set or mechanically fastened, and the fasteners or mortar fail first because that’s where thermal movement is greatest.
- Rust streaks or corrosion at flashing and penetrations. Old flashing at chimneys, skylights, and vent pipes is a top leak source. The metal corrodes and the sealant under it dries out and pulls away.
- Sagging or soft spots when you walk the roof. This is a structural symptom, not a cosmetic one – it can mean sheathing rot or a compromised batten system. Stop walking on it and get it looked at.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Irvine, a full roof replacement runs $8,000 to $20,000 depending on square footage, tile vs shingle, and how much decking or underlayment needs replacing underneath. Targeted roof repairs run $400 to $1,800, and tile-specific repairs sit between $600 and $2,500 when we’re matching profiles and re-bedding hips or ridges. Metal roofing, if you’re considering an upgrade, runs $15,000 to $40,000.
Here’s what drives the range: the number of penetrations (chimneys, skylights, vents), whether the existing underlayment can stay, and the type of tile being matched. On tinted concrete tile, a color-match order can add lead time. Every quote we give is line-itemed – materials, labor, tear-off, and disposal are separate lines so you see exactly what you’re paying for. Work is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. No surprise add-ons. The number you see is the number you pay.
DIY or Call Us?
You can safely do a few things yourself: check your gutters for granule buildup, look at your ceiling for water stains after a rain, and walk your yard to spot lifted ridge tiles from the ground with binoculars. Do not get on a tile roof yourself. Tile is brittle, the slope is often steeper than it looks from below, and a slip on a two-story roof is a serious injury. Worse, when a well-meaning homeowner walks a tile roof, they crack tiles that were fine – and each crack becomes a future leak point.
For anything involving the underlayment, flashing, or ridge and hip repair, call us. Our technicians have up to 12 years of experience, arrive in uniform, and are background-checked. Call (888) 578-4462 for a free estimate.
FAQs
Concrete tile under Oldcastle systems typically lasts 40 to 50 years, and clay tile can exceed that. That’s the tile, though, not the underlayment or flashing – those are the parts that fail first, often in 15 to 25 years in Irvine’s climate, because UV exposure breaks down the felt long before the tile itself wears out. Call (888) 578-4462 if your roof is in that age window.
Yes, if the failure is localized – a few cracked tiles, a failed ridge, or damaged flashing can be repaired for $400 to $1,800. If the underlayment is failing across large sections, though, repairs patch the symptom and the leaks return. We’ll tell you honestly which side of that line you’re on.
A localized tile or flashing repair is usually a single visit. A full residential roof replacement typically takes one to three days depending on size and weather. We don’t claim same-day on a replacement – that’s not realistic for a job of that scope.
We source from authorized roofing distributors and manufacturers that carry Oldcastle profiles and accessories, and we match the physical tile stamp or dimensions before ordering. We don’t claim to stock parts locally or carry them on a truck – parts are ordered to your job. Groundwork Construction Co. of Irvine is an independent service provider and is not affiliated with Oldcastle.
If you’ve got an Oldcastle roof in Irvine that’s leaking, shedding, or just showing its age, get a straight answer on cost and scope before anything else. Call (888) 578-4462 to schedule your free project estimate and design consult – a live person answers, day or night. We’re proud to serve Irvine and surrounding communities with upfront pricing, verified brand partners including KraftMaid, Cambria, and Silestone, and a 730-Day Done Right Promise on every job.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.