Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cover Kitchen Remodeling: The Irvine Owner’s Guide
Cover kitchen remodeling installed by an independent Irvine contractor typically runs $14,000 – $45,000 for a full remodel, with smaller scope projects landing in the $9,000 – $20,000 range. We install and service Cover-compatible kitchen systems across Irvine, quote line items in writing before work starts, and schedule most projects within a normal lead time, not same-day. The 730-Day Done Right Promise backs every job. Groundwork Construction Co. of Irvine is an independent service provider and is not affiliated with Cover.
Most Irvine owners find out something is failing the same way: a cabinet door that won’t stay shut, a drawer that grinds halfway out, or a countertop seam that’s started to show a hairline crack near the sink. In a 1980s Woodbridge kitchen or a newer Great Park build, the failure usually traces back to hardware fatigue, moisture from coastal air, or an install that skimped on fasteners. Once one hinge or glide goes, the rest are typically on the same clock.
Which Cover Models This Applies To
Cover cabinetry and kitchen systems come in distinct series lines that differ in box construction, hinge type, and drawer glide standard. Before we quote a replacement, we pull the model number from the label inside the cabinet door or on the back panel of the base cabinet. Some older Cover boxes used a 32mm system with specific hinge cup bore spacing; get that measurement wrong and a new door won’t sit flush no matter how carefully it’s hung.
The OEM-versus-aftermarket call matters more on Cover than on some brands. Cover-specific hinges and glide clips are often proprietary, and a generic “fits most” replacement can fail again in 18 months. Where a quality aftermarket equivalent exists with matching bore spacing and load rating, we’ll quote it and tell you why it works. Where it doesn’t, we source the Cover-spec part. KraftMaid, Cambria, and Silestone also get serviced here, so if your kitchen mixes brands across cabinets and counters, we handle the whole scope in one visit wherever possible.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cover Kitchen Remodeling Is Failing
These are the symptoms Irvine homeowners describe most often, and what’s usually behind each one.
- Doors that sag or won’t close flush. The hinge plate has loosened from the box or the hinge itself has lost tension. In Cover cabinets with the clip-on style, a worn clip is a common culprit.
- Drawers that grind or pull out crooked. The glide has worn unevenly or a track fastener has backed out of the box side. Left alone, the drawer box warps and the whole unit needs replacing.
- Hairline cracks at countertop seams. Usually a failed seam adhesive or movement from a cabinet that’s shifted. Irvine’s seasonal temperature swings put stress on seams that weren’t set with the right adhesive.
- Soft or swollen cabinet bottoms under the sink. A slow leak or condensation from coastal humidity has soaked the box. This one spreads fast and is worth checking early.
- Doors that stick in summer and free up in winter. Wood movement from humidity, often combined with an out-of-square box. A hinge adjustment sometimes fixes it; sometimes the door needs rehanging on new hardware.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how the Irvine numbers break down for the work tied to a Cover kitchen failure. These are installed ranges, parts and labor together.
| Scope | Installed range (Irvine) |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range moves based on cabinet box count, whether you’re keeping boxes and swapping hardware and doors, and counter material (Cambria quartz sits higher than a laminate). We quote line items in writing with upfront pricing, so the number you see is the number you pay. All work carries the 730-Day Done Right Promise. 0% financing for 18 months is available, plus $1,000 off projects over $10,000.
DIY or Call Us?
You can safely check a few things yourself: open the cabinet and read the model label, measure the hinge cup bore, and tighten a loose hinge screw with a screwdriver. That’s diagnostics, and it helps us quote accurately.
Where DIY goes wrong: rehanging doors on a box that’s out of square, cutting a countertop seam without the right adhesive, or swapping a glide for a “fits most” part that fails again. Cabinet work involves live plumbing under the sink and, in a full remodel, electrical and gas connections that belong with a trained professional. Hardwired appliance circuits and gas lines aren’t a homeowner job, and we won’t hand out instructions that could get someone hurt.
Call (888) 578-4462 for a free estimate. A live person answers around the clock, and our technicians are background-checked and uniformed.
FAQs
A well-installed Cover kitchen typically holds up 15 to 25 years before hardware fatigue sets in, and Irvine’s coastal humidity tends to shorten that on sink-side cabinets. Humidity swings and moisture near the sink are the two biggest lifespan factors here. Call (888) 578-4462 for an exact quote on your setup.
Often yes. Hinges, glides, and clips can be swapped without touching the box, and that’s usually the cheaper path when the cabinet structure is sound. Once a box has swollen or a countertop seam has cracked through, replacement is the honest answer.
Hardware and door swaps are often completed in a single visit. A cabinet or countertop replacement takes longer depending on scope, and we’ll give you a written timeline up front. Most jobs are finished in one appointment.
We source Cover-spec parts from authorized suppliers and match the model number, bore spacing, and load rating before ordering. We don’t claim to carry parts on a truck; we order the exact part your model needs. KraftMaid, Cambria, and Silestone parts are also available.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.