A Groundwork company - serving Irvine, CA

Dvele Driveway & Pavers in Irvine, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Dvele Driveway & Pavers: The Irvine Owner’s Guide

We install Dvele-compatible driveway and paver systems across Irvine, and most full driveway replacements land between $5,000 and $14,000 depending on square footage, base condition, and paver selection. Paver driveway installations typically run $7,000 to $18,000, while concrete driveway work in Irvine runs $4,500 to $12,000. We’re an independent service provider – not affiliated with Dvele – and we handle the sourcing, removal, and reinstallation as one scope of work.

Call (888) 578-4462

Owners usually discover the problem the same way: a paver lifts slightly after a rain, water pools where it never used to, or a hairline crack in the driveway base widens through an Irvine summer. One shifted paver on a Dvele system usually means the bedding layer underneath has already failed. If you’re calling because a single tile or paver looks off, that’s the right instinct. The visible symptom is almost never the whole story.

Key Takeaways

  • Installed paver driveway replacement in Irvine: $7,000 – $18,000. Concrete: $4,500 – $12,000.
  • Dvele installations use specific base and bedding specs – matching them matters more than matching the paver color.
  • Every project is covered by our 730-Day Done Right Promise.
  • Free estimate and design consult – call (888) 578-4462 and a live person answers, day or night.

Which Dvele Models This Applies To

Dvele builds prefab and modular homes across several product lines, and the exterior hardscape spec differs between them. The important thing to know: Dvele doesn’t manufacture pavers or driveway systems – it specifies them. That means “Dvele-compatible” isn’t a single part number. It’s a set of specs your home was built to: base depth, bedding sand gradation, edge restraint type, drainage slope, and the paver unit dimensions called out in your construction documents.

Here’s the part most Irvine owners miss. The paver style on your Dvele home may be discontinued at the manufacturer level even when the color name still exists on a spec sheet. Colors get renamed, molds get retired, and the “same” paver from a different production run can read a full shade off in Irvine’s afternoon light. Before you order anything, pull three things: the paver dimensions (measure a full unit, not a half), the color and finish name from your project documents, and the edge restraint profile at the driveway perimeter.

On the OEM-versus-aftermarket decision, our position is straightforward. The base and bedding specs are non-negotiable – they drive how the driveway performs for the next two decades. The paver unit itself is where a quality equivalent is often the better call, especially when the original is discontinued. We source from verified partners including Belgard, and we’ll show you side-by-side samples against your existing pavers before anything is ordered. We also work with KraftMaid, Cambria, and Silestone on interior projects, but this page stays on your driveway.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Dvele Driveway & Pavers Is Failing

  • Individual pavers rocking or lifting. The bedding sand underneath has washed out or compacted unevenly. In Irvine, this typically shows up first at the driveway apron where irrigation runoff concentrates. A rocking paver is a base failure signal, not a paver quality issue.
  • Ruts or depressions in the driveway surface. The sub-base was undercompacted at install, or water has been infiltrating through joints for years. Once a rut forms, adding sand on top only hides it for a season.
  • Efflorescence – the white chalky haze. Mineral salts migrating to the surface as moisture moves through the paver. Some of this is cosmetic and seasonal, but persistent efflorescence on a Dvele driveway usually points to poor drainage or a bedding layer staying wet.
  • Joint sand washing out after every rain. The joint sand is the system’s first line of defense against water reaching the base. If you’re refilling joints more than once a year, the drainage plane has failed somewhere – often at the edge restraint.
  • Visible cracks in concrete or settled sections at the apron. On concrete portions of a Dvele driveway, cracking usually starts at the apron or where the slab meets the street. Irvine’s expansive clay soils move seasonally, and an unreinforced slab will telegraph that movement within a few years.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what Irvine homeowners actually pay with us. Paver driveway installation runs $7,000 to $18,000. Concrete driveway installation runs $4,500 to $12,000. A full driveway replacement – removal of the old surface, base repair, and new install – runs $5,000 to $14,000. If your Dvele driveway just needs sealing, that’s $250 to $700. Paver patio installation, if you’re extending hardscape, runs $3,500 to $11,000.

What drives your number: square footage, how far the base has failed, accessibility for equipment, and paver selection. Every quote is upfront and line-itemed – the number you see is the number you pay. Parts and labor are broken out separately so you can see exactly what the paver unit costs versus the base work. All work is covered by the 730-Day Done Right Promise, and there’s $1,000 off projects over $10,000 plus 0% financing for 18 months if you’re planning a larger hardscape scope.

Service Irvine Price Range
Paver driveway installation $7,000 – $18,000
Concrete driveway installation $4,500 – $12,000
Asphalt driveway paving $3,500 – $9,000
Driveway replacement (full) $5,000 – $14,000
Driveway sealing $250 – $700
Paver patio installation $3,500 – $11,000

DIY or Call Us?

Some of this you can safely check yourself. Walk the driveway after a rain and note where water pools. Try rocking individual pavers by hand. Photograph the edge restraint along the perimeter. Measure a paver unit so you know the exact dimensions before you call anyone. None of that involves risk, and it makes the estimate conversation faster.

Where DIY goes wrong: re-sanding joints over a failed base, or pulling pavers to “fix one” and resetting them without compacting the bedding. You’ll spend a weekend and the problem returns within a season, because the actual cause is underneath. On the concrete side, don’t attempt to patch or lift settled slabs on your own – a slab that fails while you’re working around it can cause real injury. For a hardscape system, the base work is the whole job. Call (888) 578-4462 and we’ll walk you through what to check and give you a free estimate.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 578-4462
Local Service Coverage

Request a Free Estimate in Irvine

Tell us what you need - Groundwork Construction Co. of Irvine responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch