Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Home Additions & ADU: The Irvine Owner’s Guide
We install and service Mighty Buildings-compatible home additions and ADUs in Irvine, with typical installed projects running $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a full ADU. Most Irvine owners find us after their panelized Mighty Buildings structure develops a problem the factory warranty doesn’t cleanly cover: a leaking seam at a module joint, a failed expansion gasket, cracked joint sealant, or a connector or flashing component that’s no longer pulling its weight. The good news is that Mighty Buildings structures are engineered around replaceable components, and the right fix is usually a specific part matched to your panel system, not a rebuild.
Groundwork Construction Co. of Irvine is an independent service provider. We’re not affiliated with Mighty Buildings, and we don’t claim to be. What we do is match the correct compatible part to your model, quote it upfront with no surprises, and back the install with our 730-Day Done Right Promise.
Which Mighty Buildings Models This Applies To
Mighty Buildings builds its panels and ADU kits across a few product lines, and the components are not interchangeable between them. The joint gaskets, structural connectors, and flashing profiles that fit one panel series often won’t seat correctly on another, which is the number-one source of failed repairs we see in Irvine. Before we quote anything, we identify your exact system. Every structure has a data plate or serial label, usually near the main entry frame or on the panel closest to the electrical panel, that lists the panel series and production line.
If the label is gone or painted over, we measure panel module dimensions directly. The width and joint tolerance of the panels tell us which series we’re dealing with. This matters because Mighty Buildings changed joint sealing profiles between production runs, and a gasket that looks identical on a shelf can be a different durometer (hardness) and fail within a year in Irvine’s heat.
On OEM versus aftermarket: the OEM part is always the safest match for a Mighty Buildings system because the tolerances are exact. For some components, like certain sealants and flashing profiles, a high-quality aftermarket equivalent performs as well as or better than OEM and costs less. We tell you honestly which is which on every quote. We don’t stock parts and we don’t carry them on a truck; we source the correct component for your specific model, whether that’s OEM or a vetted equivalent, and bring it to the job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mighty Buildings Home Additions & ADU Is Failing
- Water staining or dampness at a module joint. The expansion gasket has lost its seal or the joint sealant has cracked. In Irvine, this shows up most after the first hard rain following a dry summer, when panels have expanded and contracted through months of heat.
- Visible gaps or daylight at seams. A structural connector or shim has shifted, or the gasket has compressed past its service life. Daylight at a panel seam means water and air are getting in too.
- Musty smell or elevated humidity inside the addition. That usually points to a failed flashing component at a roof-to-wall transition allowing moisture behind the panel. Left alone, it reaches the framing.
- Bubbling or peeling paint or sealant at panel edges. Moisture is trapped behind the surface. This is an early warning, before visible leaks start.
- Rattling or movement you can feel at a wall. A connector or anchor has loosened, which is a structural concern, not a cosmetic one. Stop using that area and get it assessed.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Most Mighty Buildings component repairs and replacements in Irvine fall inside our standard project range. A gasket or sealant failure at a single joint runs toward the low end of the additions range; a larger structural connector, flashing, or multi-panel repair sits higher. We quote the part and the labor separately, line by line, so you see exactly what you’re paying for, and the number you see is the number you pay.
- Home Addition (installed): $45,000 – $130,000
- ADU Construction (installed): $90,000 – $220,000
- Garage Conversion: $30,000 – $80,000
What drives the number: how many joints or panels are involved, whether the flashing is accessible, whether we’re replacing OEM or sourcing a vetted equivalent, and permit requirements through the City of Irvine. Every job is covered by the 730-Day Done Right Promise, plus 0% financing for 18 months and $1,000 off projects over $10,000. We pull the permits and pass the inspections; that’s part of the quote, not a surprise line item.
DIY or Call Us?
Here’s the honest split. You can safely check and note: photograph the joint or seam in question, check the data plate for your panel series, and clear away any debris that’s collecting at a flashing edge. That’s information-gathering, not repair. What goes wrong in DIY on these structures is the sealing and structural work itself. Panel joints are engineered with specific compression tolerances; a homeowner-applied tube of caulk that isn’t the right durometer can trap moisture, hide a failing gasket, and make the real repair more expensive later. Structural connectors are worse: a wrong fastener or over-torqued anchor can compromise a load path on a factory-built wall.
Mighty Buildings panels are precision components, and precision components don’t tolerate guesswork. If a joint is leaking, daylight is showing, or a wall feels loose, that’s a call to us, not a trip to the hardware store. Call (888) 578-4462 and a live person answers, around the clock. We’ll tell you straight whether it’s a quick component swap or something bigger.
FAQs
Expect a properly installed gasket or joint sealant to hold for roughly 10 to 15 years in Irvine’s climate, with UV exposure and the seasonal heat-and-dry cycle being the main factors that shorten it. Sealant that sees full afternoon sun on a south-facing panel can fail sooner, closer to 8 to 10 years. Call (888) 578-4462 for an exact quote on a replacement; estimates are free.
Sometimes, yes. A single gasket that’s compressed but intact can often be re-seated and re-sealed, while a cracked or torn gasket needs replacement. A flashing with a small lifted edge may be re-adhered; one that’s rusted or deformed has to go. We diagnose in person and tell you which path is honest. Call (888) 578-4462 to schedule a free assessment.
A single-joint gasket or sealant replacement is typically a single-day job. A multi-panel connector or flashing repair can run two to three days depending on access and how many joints are involved. Planned work is scheduled around your calendar, not squeezed into a false same-day promise. Call (888) 578-4462 for a realistic timeline on your specific repair.
We start from your panel series, identified by the data plate or by measuring the panel modules, then order the matching OEM component or a vetted equivalent with the correct dimensions and durometer. We don’t claim to stock parts; we source the exact match for your model and bring it to the job. Call (888) 578-4462 to get your part matched and quoted.
If you’re weighing kitchen, bath, or window work alongside your Mighty Buildings project, we also install KraftMaid, Cambria, and Silestone in Irvine homes. But if it’s the panel joint, the gasket, or the flashing that’s failing, that’s the call to make first. Reach us at (888) 578-4462 for a free estimate, upfront pricing, and a fix backed in writing by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Irvine, serving Irvine and nearby areas.