A Groundwork company - serving Irvine, CA
Custom & Geometric Windows in Irvine, CA | Groundwork Construction Co. of Irvine

Custom & Geometric Windows in Irvine - Free Measure, Exact Written Quote

Free in-home measure and an exact written price before anything is ordered. Energy-rated units, professional installation by a licensed local installer, and a workmanship warranty on the install.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Custom & Geometric Windows in Irvine: What They Cost and How the Work Runs

Custom and geometric windows in Irvine typically run $8,000 to $25,000 for a multi-opening project, with most single feature windows landing between $2,500 and $6,500 each once templating, fabrication and stucco integration are included. Lead time is the real story: six to twelve weeks for fabrication, then two to four days on site per opening cluster. Call (888) 578-4462 and we’ll walk your plan through it, permit path included, at no charge.

Call (888) 578-4462

Arched, round, trapezoid, angled eyebrow and full-height radius units behave differently from a rectangle. Nothing is off the shelf, nothing gets swapped from a warehouse rack, and every unit is measured to your actual opening. Here’s how that plays out in Irvine’s planned-community housing.

How we build Custom & Geometric Windows in Irvine, stage by stage

Geometric units fail or leak for one reason more than any other: somebody templated off a drawing instead of the framed opening. Our sequence is built to prevent that, and it costs you a little patience up front.

Stage 1: Site measure and field template (day 1, 2 to 3 hours)

We come out, pull trim where needed, and check the opening for square, plumb and true. On arched or angled openings we build a physical template of the radius or pitch and photograph the rough opening with a tape in frame. This is when you decide the operable-versus-fixed question and whether the unit is a picture feature or a venting window.

Stage 2: Specification and written quote (days 2 to 5)

You pick frame material, glass package, grille pattern and finish. We put the whole thing in a line-item quote: unit cost, templating, fabrication, flashing, stucco patching, permit fees and inspection. The number you see is the number you pay. If the opening needs structural work once we’re inside it, that gets flagged and priced before anyone swings a hammer, not after.

Stage 3: Permit and HOA submittal (weeks 1 to 4)

This is the slow stretch and it’s mostly paperwork. Irvine requires a permit for window replacement that changes the opening size or the egress configuration, and a radius or geometric unit almost always qualifies. If you’re in a village with a design-review board, the architectural submittal runs in parallel. We handle both packages.

Stage 4: Fabrication (weeks 4 to 12)

Custom units are built to order. Andersen and Marvin both build radius and polygon units, and lead times move around with glass packages and finish choices. You’ll get a fabrication update, not silence. This is the point where a change to the grille pattern or finish is still possible but adds time.

Stage 5: Installation, flashing, stucco and inspection (days on site, 2 to 4 per cluster)

Old unit comes out, opening gets prepped and squared, new unit sets into a bed of sealant with proper head flashing and a drainage plane. Stucco patching and finish blending follow, then the city inspection. Final walkthrough covers operation, screens, and the warranty paperwork. Everything falls under our 730-Day Done Right Promise.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The options you’ll choose between on a geometric window

Every one of these decisions changes both the price and how the window behaves in Irvine’s dry heat. Here’s the honest read on each.

  • Frame material: vinyl vs. fiberglass vs. wood-clad. Vinyl is the budget path and handles a radius fine, but color options are limited and it can’t be painted. Fiberglass holds shape better on large arched units and takes paint. Wood-clad (Andersen’s 400 Series, for example) is the premium look for a Spanish-revival facade, at the top of the price band.
  • Glass package. Dual-pane low-E is the baseline for Irvine’s UV load. Tempered glass is required where a unit is close to a floor or a door, and laminated glass is worth considering on any opening facing the wildland edge. Each step up adds cost.
  • Grille pattern and divided lites. A true divided-lite arch is hand-built and priced accordingly. Simulated divided lites give the look for less; a clean single pane is the cheapest and the most modern.
  • Fixed vs. operable. Most geometric units are picture windows. Making one operable adds hardware, a screen and real cost. Ask whether you actually need it.
  • Trim and interior finish. Drywall return, wood casing or a stained jamb. Simple decision, real visual difference.

What Custom & Geometric Windows cost in Irvine, CA

For a typical project of three to five feature openings, budget $8,000 to $25,000. That range holds because the variables are knowable once we’ve templated your opening. Here’s what pushes a job to the low or high end.

  • Unit geometry and count. One arched unit is a modest job. Six trapezoids around a great room is a production. Every opening carries its own template, fabrication and install labor.
  • Opening condition. A clean, square rough opening costs less. Rot, sag, or a previous window installed without flashing adds demo and framing work.
  • Material grade. Vinyl sits at the low end. Fiberglass and wood-clad move toward the high end.
  • Stucco and finish integration. A radius in a stucco wall needs careful patching and blending. On a Spanish-revival facade this is where craftsmanship shows, and it’s priced accordingly.
  • Permit and HOA scope. Structural changes, egress changes or a design-review resubmittal add time and fees.

A written estimate includes units, templating, fabrication, flashing, installation labor, stucco patching, permit fees and inspection. It does not include structural repairs discovered mid-job, HOA resubmittal fees if the design changes, or interior paint touch-up beyond the immediate opening. We spell out the exclusions so there are no surprises. Call (888) 578-4462 for an exact quote on your Irvine project.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Irvine homes specifically do to this job

Irvine is a master-planned city, and that shape shows up in the paperwork before it shows up in the framing. Most of our custom and geometric window work happens inside village-specific HOAs and design-review boards, not across a patchwork of independent jurisdictions. The architectural standards here are uniform and strict, and the city’s building division runs a plan check that neighbors like Tustin or Santa Ana rarely match. A radius unit that would sail through elsewhere can stall for weeks on an HOA submittal if the grille pattern or finish color doesn’t line up with the village palette.

The housing stock is overwhelmingly post-1965 planned-community construction: Mediterranean and Spanish-revival stucco tract homes in Woodbridge, Northwood and Turtle Rock, plus the dense 2000s-era condo clusters near the Spectrum and UCI. On the 30-to-50-year-old tract homes we’re often replacing an original arched unit that has fogged, lost its seal, or opened a stucco crack above the header. Along the city’s eastern and southern edges, where homes abut open space and the Santa Ana foothills, WUI fire-hardening rules apply: ember-resistant vents, Class A assemblies, noncombustible detailing. A geometric window on that edge wants a tempered or laminated glass package and a fire-rated assembly that a contractor from outside Irvine often misses on the first plan check. We cover Irvine village by village.

Serving Irvine, CA – Our Local Coverage Area

We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently asked: Custom & Geometric Windows in Irvine

Get a free estimate on Custom & Geometric Windows in Irvine

If your Irvine home has an arched, round, trapezoid or angled opening that needs a real window, call (888) 578-4462. A live person answers around the clock. We’ll schedule a free on-site estimate, template your opening, and hand you a written line-item quote with permits, HOA submittal and stucco work already in the number. No sales pressure. Just a straight answer on cost and timeline.

Written by the team at Groundwork Construction Co.

Why Irvine Chooses Groundwork Construction Co. of Irvine

We set the standard for custom & geometric windows in Irvine.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Irvine

Getting your custom & geometric windows project started is simple.

1

Call or Request a Free Estimate

Tell us about your custom & geometric windows project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local custom & geometric windows pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Irvine Customers Say

Trusted by homeowners across Irvine and surrounding areas.

★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan
★★★★★

"Change orders were written down and priced before the work happened, every single time. No surprise at the end."

Keisha Robinson

Ready for Custom & Geometric Windows in Irvine?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Irvine.

(888) 578-4462

Request a Free Estimate in Irvine

Tell us about your custom & geometric windows needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - 24/7 Dispatch