Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Tustin: What the Job Actually Involves
Vanities, tile & fixtures work in Tustin runs $9,000 – $28,000 for a full bathroom’s worth of surfaces and fittings, and most projects land between three and five weeks from demo to final caulk. That number covers the vanity and top, floor and shower tile, and the fixtures themselves – not a full layout change. Call (888) 578-4462 and we’ll walk your bathroom and put real line items against it.
How We Run a Vanities, Tile & Fixtures Job, Stage by Stage
Bathroom surface work looks simple from the doorway. It isn’t. Waterproofing, substrate condition and the order you install things in decide whether the job holds for fifteen years or leaks in three. Here’s the actual sequence we follow.
Stage 1: Measure, Select, and Lock the Spec (days 1 – 3)
We measure the room, check what’s behind the current tile, and confirm whether the vanity footprint matches standard sizing. This is where you make the biggest decisions: vanity width and depth, tile format, fixture finish. You’ll want those locked before anything is ordered because lead times on a KraftMaid vanity can run two to four weeks, and tile from a discontinued dye lot can’t be matched later. We write the spec sheet and you sign off on it.
Stage 2: Demo and Substrate Check (days 4 – 5)
We pull the old vanity, tile, and fixtures and expose the wall and floor. This is the honest moment. On older Tustin homes we regularly find drywall where cement board should be, or a shower pan that was never waterproofed properly. If the substrate is soft or the framing behind the shower is compromised, that’s a change we bring to you before we proceed – with a price, not a surprise.
Stage 3: Rough-In and Waterproofing (days 6 – 8)
If the vanity is moving or you’re adding a second sink, this is when the plumbing and electrical get relocated – and it only happens once the wall is open. We install cement board, then a bonded waterproofing membrane on the shower walls and floor, then a flood test on the pan. Tile laid over a bad pan fails no matter how good the tile is. This stage is where the job is won or lost.
Stage 4: Tile Setting and Grouting (days 9 – 14)
Floor tile first, then shower walls, then grout and seal. Large-format tile takes longer to set level and needs a flatter substrate. We lay out the pattern before a single piece goes down so cuts land where you won’t stare at them. You’ll see the layout on day one of setting, and that’s your last easy chance to change direction.
Stage 5: Vanity, Fixtures, and Final Walkthrough (days 15 – 20)
The vanity gets set and shimmed level, the top goes on, the sink and faucet get connected, and the toilet, mirror, and lighting go in. Then we run water, check for leaks, and walk the room with you. Anything on the punch list gets handled before we call it done. The whole thing is backed by our 730-Day Done Right Promise – if it’s not right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Matter: Vanities, Tile & Fixtures Options
Most homeowners spend their decision energy on paint color and regret it. The materials below are where the money and the longevity live.
- Vanity construction: Furniture-grade plywood boxes hold up to moisture far better than particleboard. A stock particleboard vanity is cheaper up front and swells at the toe kick within a few years in a steamy bathroom. KraftMaid’s semi-custom line is a solid middle path if you want a specific width and door style.
- Vanity top: Quartz is the default for good reason – it doesn’t stain, doesn’t need sealing, and handles a hot curling iron. Marble looks better and etches from toothpaste and lemon. Cultured marble is the budget option and shows scratches.
- Floor tile: Porcelain is denser and more chip-resistant than ceramic; both are fine, but porcelain wins in a wet room. Large-format (12×24 and up) means fewer grout lines to scrub. Small hex or penny tile is period-correct for older Tustin homes but means a lot more grout.
- Shower wall tile: Glazed porcelain is easy to clean. Natural stone needs sealing every year or two. A slab wall is the low-maintenance high-end choice and costs accordingly.
- Fixtures: Kohler and similar mid-tier brands balance finish durability and parts availability. Cheap faucets fail at the cartridge first, usually around year four.
- Grout: Epoxy grout costs more, resists staining, and doesn’t need resealing. Cementitious grout is cheaper and needs attention.
What Vanities, Tile & Fixtures Costs in Tustin, CA
Plan on $9,000 – $28,000 for the full scope. A straightforward swap – same layout, stock vanity, porcelain tile – sits near the bottom. A larger primary bath with a custom vanity, slab shower walls, and relocated plumbing lands near the top.
Five things move that number:
- Room size and tile area: a shower and floor alone can run 120 square feet of tile; a large primary bath can double that.
- Existing condition: a failed shower pan or rotted framing behind the wall adds demo and rebuild.
- Moving plumbing or electrical: relocating a drain or adding an outlet means opening walls and an inspection.
- Material grade: stock versus semi-custom vanity, porcelain versus natural stone, epoxy versus cement grout.
- Permit scope: a like-for-like surface replacement usually doesn’t need one; moving plumbing or changing the layout does.
A written estimate from us itemizes tile, vanity, fixtures, labor, waterproofing, and disposal, and states what’s excluded. What it doesn’t include: structural repair found mid-demo, which we price before we proceed. The number you see is the number you pay on the scope we agreed to.
See the difference
Before
After
Before
After
Before
AfterWhat Tustin Homes Specifically Do to This Job
Tustin runs two different housing markets side by side, and they fail differently. In the 1950s – 1970s tract and ranch homes around Old Town and throughout ZIP 92780, we’re often opening a wall for the first time and finding original plumbing and drywall where waterproofing should be – the tile may look fine while the pan underneath has been quietly failing for years.
Up in Tustin Ranch and ZIP 92782, the homes are newer two-story stucco subdivisions from the 1980s – 2000s, and many sit under HOA design review. That review matters here: exterior changes need architectural approval, and interior work that touches a window or exterior wall can also fall into it. We handle ARB-compliant paperwork and match existing finishes so the work doesn’t trigger a violation. If your project grows into a full Bathroom Remodeling in Tustin, that scope gets its own conversation – this page stays focused on surfaces and fittings.
Serving Tustin, CA – Our Local Coverage Area
We serve Tustin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Vanities, Tile & Fixtures in Tustin
Most run three to five weeks once materials are on site, with lead time on the vanity adding two to four weeks before that. Call (888) 578-4462 for a timeline based on your actual selections.
Like-for-like replacement usually doesn’t require a permit; moving plumbing, electrical, or the layout does. We pull the permits and pass the inspections when the scope needs them, and we’ll tell you up front which category your job falls into.
Yes, and most jobs stay within the existing footprint. Keeping the drain and supply locations where they are shaves cost and time. We’ll show you what a same-layout refresh looks like against a layout change so you can weigh the difference before committing.
The range is $9,000 – $28,000, and it holds on the scope in your signed estimate. If demo uncovers rot or a failed pan, we bring you the price before we touch it – no surprise invoices. Call (888) 578-4462 for a free on-site estimate.
Every job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers our workmanship, and manufacturer warranties ride on top for vanities and fixtures. Homeowners often pair this work with Specialty Roofing in Tustin or Tile Roofing in Tustin when they’re freshening the exterior at the same time; both fall under our Bathroom Remodeling and broader construction work across Tustin.
Ready to Price Your Tustin Bathroom Surfaces?
Call (888) 578-4462 to schedule a free on-site estimate. We’ll measure the room, look at what’s behind the existing tile, and give you a written line-item quote for vanities, tile & fixtures in Tustin – usually within a few days of the visit. Our technicians have up to 12 years of experience, pricing is upfront with no surprises, and 0% financing for 18 months is available, plus $1,000 off projects over $10,000. Calls are answered by a live person 24/7.
Written by the team at Groundwork Construction Co.