Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in North Tustin, CA: What It Costs and What the Job Involves
A chain link fence in North Tustin typically runs $3,500 – $9,000 for a standard residential run, and most jobs are installed in 2 – 4 working days. The number moves with linear footage, height, gauge, gates, and terrain. On the half-acre-plus parcels around 92711, we usually quote 150 – 400 linear feet, often with one or two drive or walk gates. Call (888) 578-4462 for a free on-site estimate with a written line-item quote.
How the job runs, stage by stage
Chain link is one of the few fences that rewards careful prep more than fancy materials. The wire and posts are commodities; the layout, the digging, and the concrete are where a job either lasts 25 years or sags by year three. Here’s the sequence we follow on North Tustin properties.
Stage 1: Walk the line and flag utilities (day 1, roughly 1 – 2 hours)
We meet you on site, confirm the property line against your plat or survey, and mark corners, gates, and any tree roots or drainage swales in the path. On larger lots we call in the 811 utility locate before anyone puts a shovel in the ground. This is where you decide fence height (4, 5, or 6 feet), gate count, and whether the fence ties into an existing wall or structure.
Stage 2: Demo and clearing (day 1 – 2, 2 – 5 hours)
Old wire, posts, and concrete footings come out, along with brush along the run. On hillside parcels we also check the slope transitions: a fence that steps cleanly in 8-foot drops reads as intentional, one that racks at odd angles looks like a mistake. You’ll approve the step pattern before we set line posts.
Stage 3: Layout, augering, and setting posts (day 2, 4 – 6 hours)
Terminal posts get set in concrete first, then line posts every 8 – 10 feet, then top rail. We use 2⅜-inch galvanized line posts and heavier 2⅞-inch terminal posts, set 24 – 30 inches deep in concrete. This is where the site matters most: canyon-edge property and graded pads sometimes hit rock or old footings, and that adds time and cost.
Stage 4: Mesh, gates, and tension (day 3, 3 – 5 hours)
We stretch the fabric with a come-along and tie it to the top rail and tension wire. Gates get their own frames and hinges, and we adjust latches and swing before we leave. If the job includes a driveway gate, that’s usually a separate discussion – mention it early so it’s in the written scope.
Stage 5: Cleanup and final walk (day 3 – 4, under an hour)
Excess soil and old material go with us. We walk the entire run with you, test every gate, and hand over the workmanship warranty. Any adjustment you want – a sagging hinge, a post cap addition – gets handled before we consider the job closed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Chain link isn’t one product. The choices you make in the first 48 hours decide what the fence looks like at year 15.
- Gauge: 11½-gauge is the lightest residential option and the cheapest; 9-gauge is heavier and resists sagging much better, especially on long runs or with dogs. Most North Tustin homeowners choosing a perimeter fence for acreage go with 9-gauge. The price difference is real, usually a few hundred dollars per 100 feet.
- Coating: Galvanized steel is the budget baseline and weathers to a dull gray. Vinyl-coated (usually green or black) costs 15 – 25% more but blends into mature oak and sycamore and holds up better to inland sun.
- Height: 4-foot is common for property-line marking; 5- and 6-foot give you more separation and better dog containment. Anything over 6 feet triggers structural questions and often a permit.
- Gates: Walk gates run 3 – 4 feet; drive gates run 10 – 12 feet. Single vs. double, and swing direction, matter more than people expect when the gate serves a shop or RV pad.
- Brands and finishes: For gate frames and hardware we work with quality options like ActiveYards and Jerith where the product line fits, though chain link is largely a commodity market – the install quality does most of the work.
What Chain Link Fence costs in North Tustin, CA
Plan on $3,500 – $9,000 for a typical residential chain link fence in North Tustin, with the most common projects landing near $5,000 – $6,500. Here’s a rough line-item picture before a walkthrough:
| 4-foot galvanized, 150 ft, one gate | $3,500 – $5,000 |
| 5- or 6-foot vinyl-coated, 250 ft, two gates | $5,500 – $7,500 |
| 9-gauge heavy mesh, 300+ ft, drive gate | $7,000 – $9,000 |
| Extra gate (walk) | $400 – $900 |
| Rock or slope surcharge | $300 – $1,200 |
The variables that push a job to the top of the range: total footage (most of the cost is linear, not per-post), terrain (hillside runs need stepped panels and deeper concrete), rock or hardpan that slows the auger, gate count and hardware, and gauge or coating upgrades. What’s in a written estimate from us: the fence line, height, gauge, coating, gate specs, footings, haulaway, and the 730-Day Done Right Promise. What’s usually not included unless we say so: property-line survey (we work from yours), grade changes beyond a standard step, and moving irrigation or landscaping that’s in the path.
See the difference
Before
After
Before
After
Before
AfterWhat North Tustin properties specifically do to this job
North Tustin is an unincorporated pocket of half-acre-plus ranch and custom homes on the hills above Tustin and Santa Ana, and that geography shows up in every chain link job we quote here. Because the area falls under Orange County’s unincorporated permitting (OC Public Works) rather than the city of Tustin, fence height and setback questions can land in a different office than homeowners expect – worth confirming before we order material, especially on anything over 6 feet or along a canyon edge. The 1950s – 1970s single-story homes and later custom builds often have original drainage and retaining walls at the slope transitions, and a chain link line that ignores those will get undermined during the first heavy winter rain after a dry Santa Ana season. We scout slope drainage and wall stability before setting posts. Lots in the 92711 area tilt toward site work, grading, and long runs past workshops and detached structures, so projects here are about heavy-duty, one-trip installation rather than decorative fencing – homeowners on acreage want it done right the first time, with heavier posts and 9-gauge mesh that won’t sag by next summer. Wildfire exposure along the canyons also means we keep the fence line clear of defensible-space corridors, and we’ll flag any run that crosses one before we start.
Serving North Tustin, CA – Our Local Coverage Area
We serve North Tustin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Chain Link Fence in North Tustin
Most residential chain link runs in North Tustin take 2 – 4 working days from material on site to final walk. A short 100-foot run can finish in a day; a 400-foot perimeter with a drive gate and stepped hillside panels will run 3 – 4 days, with the augering and post-set stages pulling most of the time. Call (888) 578-4462 to get a firmer timeline for your property.
Short fences at property lines usually don’t require a permit, but anything over 6 feet, corner-vision concerns, or fencing along a slope in the unincorporated area may need review through OC Public Works. We confirm the requirement before we order material and handle the paperwork as part of the project. Call (888) 578-4462 with your address and we’ll tell you what applies.
In most cases, yes. Chain link is a post-and-concrete system, so we don’t need to disturb irrigation mains, drainage lines, or structures unless the fence line runs directly over them. Utility locates catch most conflicts before digging, and we adjust the line where needed. Call (888) 578-4462 to walk the route with us.
Expect $3,500 – $9,000 for a typical residential job, with the most common projects landing in the $5,000 – $6,500 range. Footage, gauge, coating, terrain, and gate count drive the number. Every quote comes in writing as a line-item estimate, so the number you see is the number you pay. Call (888) 578-4462 for an exact quote – estimates are free.
Every fence we install is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right, for two full years. That covers workmanship: posts, tension, gate swing, and alignment. Manufacturer coverage on the mesh and hardware is separate and comes with the material. Call (888) 578-4462 to schedule your free estimate.
Get a Free Chain Link Fence Estimate in North Tustin
If you’re fencing acreage, a workshop perimeter, or a property line on a North Tustin lot, call (888) 578-4462 for a free on-site estimate. We’ll walk the line, confirm utility locates, quote gauge and gate options with line-item pricing, and schedule the install around your timeline. Calls are answered by a live person, 24/7. If the fence is part of a Fence Installation in North Tustin project that includes other fencing, our Fence Installation team covers the wider scope. Homeowners often pair this with Concrete Driveways & Concrete Work in North Tustin or Asphalt Driveways & Resurfacing in North Tustin when the fence line touches a driveway. We serve all of North Tustin, including the hillside parcels and canyon-edge lots that need the heavier-duty install done in one trip.
Written by the team at Groundwork Construction Co.