Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Costa Mesa: What the Job Actually Costs and How Long It Takes
New cabinets and countertops in Costa Mesa typically run $14,000 – $45,000 for the combined job, with cabinet installation at $4,000 – $13,000 and countertop installation at $2,000 – $6,500 before you add an island or backsplash. Plan on 2 – 4 weeks from demo to final countertop template, depending on whether you’re moving plumbing or gas. Call (888) 578-4462 for a free on-site estimate. We pull the permits, write a line-item quote, and back the work with our 730-Day Done Right Promise.
That price spread is wide because cabinets and countertops aren’t one project. They’re two trades that have to meet in the middle, and the gap between a straight swap and a full reconfiguration is where budgets get lost. Here’s how we keep that from happening.
How We Run a Cabinet and Countertop Job, Stage by Stage
The sequence matters more than most homeowners expect. Countertops can’t be templated until cabinets are set, and cabinets can’t be set until the room is square and the electrical rough-in is final. Skipping a step is how you end up with a $6,000 slab cut wrong. Our process in Costa Mesa breaks into five stages.
Stage 1: Site Visit and Written Scope (Day 1, about 90 minutes)
We measure the room, check wall plumb and floor level, and photograph the existing plumbing and electrical locations so nothing gets a surprise later. You’ll get a written line-item quote covering demo, cabinetry, countertop material by the square foot, install, and haul-away. This is also when we confirm whether your layout changes trigger a permit. Upfront pricing, no surprises: the number you see is the number you pay.
Stage 2: Demo and Rough-In (Days 2 – 4)
Old cabinets and counters come out, and we protect the flooring and adjacent rooms. If the layout moves, this is when the plumber relocates a sink drain or a gas line for a range, and the electrician pulls new circuits for a dishwasher, disposal, or under-cabinet lighting. Allow 2 – 3 days for demo plus rough-in, longer if walls need patching or the subfloor has soft spots near the sink.
Stage 3: Cabinet Set and Blocking (Days 5 – 8)
We set base and wall cabinets, shim and level them, scribe fillers to out-of-square walls, and install the crown or light rail you chose. Doors and drawers go on last so they don’t get banged during countertop work. This is where you confirm final hardware placement and any pull-out or lazy-Susan inserts before we lock the boxes in.
Stage 4: Template and Fabrication (Days 9 – 15, mostly waiting)
A fabricator templates the installed cabinets with a digital measuring arm, and the slab gets cut and edge-profiled at the shop. Natural stone and quartz typically take 5 – 10 business days. You’ll pick your edge profile (eased, bullnose, beveled) and the sink cutout at templating. Nothing happens on-site during most of this window, which is a good time to schedule painting or flooring if you’re doing those too.
Stage 5: Countertop Install and Final Walkthrough (Days 16 – 20)
The slab or slabs arrive, get set and seamed, the sink and faucet go in, and we caulk, clean, and walk the room with you. Backsplash tile, if you’re adding it, usually follows a few days later so the adhesive cures properly. Most jobs land between 3 and 4 weeks end to end once materials are on order.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most of the decisions that move your price get made in one sitting. Here’s the honest trade-off on each.
- Stock vs. semi-custom vs. full custom cabinets. Stock boxes are the cheapest and quickest but come in fixed sizes and few finishes. Semi-custom (KraftMaid is what we specify most in Costa Mesa) hits the sweet spot with real size flexibility and durable finishes. Full custom gets you anything you want and adds weeks and thousands to the job.
- Quartz vs. natural stone vs. laminate. Quartz is non-porous and needs no sealing, which suits a busy household. Granite and marble look great but require periodic sealing, and marble etches if you leave citrus or vinegar on it. Laminate is the budget option and holds up better than it used to, but it won’t survive a hot pan.
- Slab thickness and edge profile. Standard 2cm and 3cm slabs price differently, and a thick mitered edge reads expensive in an open-plan room for a modest upcharge.
- Drawer and door hardware. Soft-close is standard now. Full-extension, undermount drawer glides and integrated pull-outs are worth the upgrade in a working kitchen.
- Under-cabinet lighting and outlets. Add these during rough-in or you’ll be running surface conduit later. A handful of outlets in the backsplash makes a big difference.
If you’re pairing new cabinets with a larger overhaul, our kitchen remodeling service covers the whole scope from one contract. Many Costa Mesa homeowners also refresh the adjoining bath at the same time, and we can quote a Walk-In Showers & Shower Remodeling in Costa Mesa or a Tub-to-Shower Conversion in Costa Mesa on the same visit so the trades don’t collide.
What Cabinets & Countertops Cost in Costa Mesa, CA
Combined cabinet and countertop work in Costa Mesa runs $14,000 – $45,000. Here’s how the line items break out.
| Line item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
Five things push you toward the top of that range:
- Size and layout. A galley with 12 linear feet of cabinets is a different job than an L-shape with an island.
- Existing condition. Out-of-square walls, soft subfloor near the sink, or old knob-and-tube-era wiring mean repair before you install.
- Moving plumbing, gas, or structure. Relocating a sink or range adds trades and inspection time. Keeping services in place saves real money.
- Material grade. Stock boxes with laminate sit at one end; semi-custom with quartz and a mitered edge sit at the other.
- Permit scope. A like-for-like swap usually needs no permit. Moving walls, plumbing, or gas does, and the city scrutinizes the paperwork.
A written estimate from us includes demo, install, permit fees where required, and haul-away. It doesn’t include the cost of the appliances or flooring you might add mid-project, so we flag those separately. 0% financing for 18 months is available, and projects over $10,000 get $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Costa Mesa Homes Specifically Do to This Cabinet Job
Costa Mesa splits into two very different construction realities, and both shape how we install cabinets here. On the west side in 92627, you’re mostly working in 1950s – 60s single-story stucco tract homes on small lots, and the walls are rarely plumb or square after six decades of settling. We plan for extra scribe fillers and shimming there. That same housing stock often has original early-panel wiring, so when the scope touches a dishwasher or disposal circuit we open the wall and check before we quote the electrical portion, rather than discovering it mid-install.
Over toward 92626 and the commercial corridor near South Coast Metro, the mix shifts to 1960s – 70s tracts and tenant-improvement work, where the framing is often straighter but the electrical and plumbing were modified by previous owners in ways that need verifying. The marine layer and salt air west of the 55 also take their toll on wood and finishes, another reason we steer most west-side clients toward the more moisture-tolerant semi-custom KraftMaid lines and phenolic or thermofoil faces over plain painted MDF. Alleys and shared driveways mean material deliveries sometimes can’t reach the back of the lot, so we stage from the street and hand-carry cabinet boxes in.
Serving Costa Mesa, CA – Our Local Coverage Area
We serve Costa Mesa and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Costa Mesa
Most jobs run 2 – 4 weeks once materials are on order, and 3 – 4 weeks is the typical figure when countertops are involved. The cabinet install itself is 3 – 4 working days; the countertop template and fabrication window adds the rest. Call (888) 578-4462 for a timeline built around your exact scope.
A straight like-for-like swap usually needs no permit. Moving plumbing, gas, or a load-bearing wall does, and we pull it and schedule the inspection. We’ll tell you up front in the written quote whether your job requires one and what it costs.
Yes, and that’s the most cost-effective path. Keeping the sink, range, and outlets where they are means no plumbing or electrical rough-in and a faster job. If you want a different layout, we’ll show you what it adds before you commit.
Typically $14,000 – $45,000 for cabinets and countertops combined, with cabinet install at $4,000 – $13,000 and countertop install at $2,000 – $6,500. The number moves on size, material grade, and whether you’re relocating services. Call (888) 578-4462 for an exact quote. Estimates are free.
Every cabinet and countertop job is covered by our 730-Day Done Right Promise. If something isn’t right, we make it right, for two years from completion, in writing. That’s the coverage on the install, and it’s uniform across every project we do.
If this is part of a bigger scope, the Kitchen Remodeling in Costa Mesa page shows how cabinets and counters fit the rest of the room. And for homeowners across the wider area, our Costa Mesa page covers the neighborhoods and ZIPs we work.
Ready for a Free On-Site Estimate?
Call (888) 578-4462 to schedule a free on-site estimate for cabinets and countertops in Costa Mesa. A live person answers around the clock, so there’s no voicemail and no waiting until Monday. On the visit we measure, photograph the existing plumbing and electrical, and hand you a written line-item quote. A background-checked, uniformed technician handles the walkthrough. Most estimates are scheduled within a few days, and you’ll know your number before you commit.
Written by the team at Groundwork Construction Co. of Irvine.