Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Costa Mesa: What It Takes and What It Costs
Backsplash, tile and flooring work in Costa Mesa typically runs $14,000 – $45,000 for a full kitchen scope that combines new floor tile, a backsplash, and the countertops that sit between them, with most projects taking two to four weeks from demo to final grout. A backsplash alone lands at $800 – $2,500. Call (888) 578-4462 for a free on-site estimate and a written line-item price.
How the work actually runs, stage by stage
We don’t hand you a schedule and disappear. Here’s the real sequence, with the decisions you’ll be making along the way and when we need them.
Stage 1: Measure, moisture check, and material lock-in (days 1 – 3)
We measure every plane the tile will cover, check the subfloor for deflection and moisture, and confirm what’s under the existing floor. In older Costa Mesa homes that last part matters, because a 1950s slab or a plywood subfloor that’s seen a few decades of coastal humidity will tell you which tile you can actually use. You’ll finalize tile, grout color, and trim at this stage, since lead times on specialty tile run two to four weeks.
Stage 2: Demo and substrate prep (days 3 – 6)
We pull the old backsplash, floor tile, and thinset down to the substrate. On a 92627 west-side ranch house, that often means cutting out drywall behind the backsplash that’s been softened by years of marine air and patching it flat before anything new goes up. Floors get leveled with self-leveling compound or a cement backer board, and we photograph the wall cavities so you have a record of what’s inside.
Stage 3: Layout and dry-fit (half a day)
Before a single tile is set, we dry-lay the floor and mark the backsplash grid so grout lines line up with cabinet seams, outlets, and the window. This is the stage where you sign off on pattern direction, offset, and where the tile terminates at an open edge. It’s a 20-minute walkthrough that prevents the “I didn’t realize it would look like that” conversation later.
Stage 4: Setting tile and grouting (days 6 – 14)
Floor tile goes down first, then backsplash after the countertop is set. Large-format floor tile takes longer per square foot than a small mosaic, and a herringbone backsplash takes roughly twice the labor of a straight stack. Grout and caulk come last, with a full cure before we touch the fixtures back on.
Stage 5: Final walkthrough and sign-off (day 14 – 20)
We check every grout line, verify outlets and switches sit flush in the new backsplash, and clean the floor to a haze-free finish. You get the closeout walkthrough and the 730-Day Done Right Promise in writing, which covers workmanship for two full years. If a tile pops or a grout joint fails inside that window, we come back and fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll be choosing between
- Porcelain vs. ceramic floor tile: Porcelain is denser, handles the humidity better, and runs $4 – $9 per square foot installed. Ceramic is cheaper at $3 – $7 but chips more easily in high-traffic kitchens.
- Natural stone: Travertine, slate, and marble look great in a Costa Mesa kitchen and cost $8 – $15 per square foot, but they need sealing every year or two, and coastal humidity makes that non-negotiable.
- Luxury vinyl plank: $3 – $7 installed, warm underfoot, and forgiving of a subfloor that isn’t perfectly flat. The trade-off is a shorter lifespan than tile, usually 15 – 20 years with good care.
- Backsplash material: Ceramic subway at $800 – $1,500, glass mosaic at $1,200 – $2,200, and full-slab quartz or marble at $2,000 – $2,500. Slab looks striking but needs a fabricator, not just a tile setter.
- Grout and layout: Epoxy grout costs more upfront but resists staining and doesn’t need sealing. Herringbone and chevron patterns add 30 – 50% to labor over a straight stack.
The honest trade-off is time versus durability. Ceramic and vinyl get you a finished kitchen faster and cheaper. Porcelain and stone cost more and take longer to set, but they don’t need replacing in a decade. Our technicians have up to 12 years of experience setting both, and we’ll tell you plainly which one fits your floor and your budget.
What Backsplash, Tile & Flooring costs in Costa Mesa, CA
Expect $14,000 – $45,000 for a combined floor, backsplash, and countertop scope in Costa Mesa, with the floor and backsplash alone in the $4,000 – $12,000 range and the countertop carrying the rest. Here’s what moves the number:
- Square footage and layout: A galley kitchen at 120 square feet sits near the low end. An L-shaped kitchen with an island pushes toward the top.
- Subfloor condition: A failed subfloor in an older home adds $1,500 – $4,000 for leveling, backer board, and possible joist repair.
- Material grade: Porcelain versus travertine can swing $3,000 – $6,000 on the same floor.
- Moving plumbing or electrical: Relocating a sink line or adding an outlet inside the backsplash adds $400 – $1,200.
- Countertop selection: Quartz runs $2,000 – $6,500; a natural stone slab can exceed that.
A written estimate from us lists tile material, thinset, grout, trim, labor, and disposal line by line, so the number you see is the number you pay. What it doesn’t cover: structural repair found after demo, or tile you supply yourself that arrives short. Those get a change order in writing before anyone lifts a trowel. If you’re pairing this with a wider scope, see our Kitchen Remodeling service or the full Kitchen Remodeling in Costa Mesa page. Many homeowners also pair the floor and backsplash refresh with a Vanities, Tile & Fixtures in Costa Mesa upgrade in the adjoining bath.
See the difference
Before
After
Before
After
Before
AfterWhat Costa Mesa homes specifically do to this job
Costa Mesa splits into two very different jobs. On the west side in 92627, most of the housing is 1950s – 60s single-story stucco on small lots near the beach, and we regularly see original tile set on a mud bed that’s cracked or drummy after sixty years of marine air. That old mud bed has to come out, not just get skimmed over, or the new tile telegraphs every crack within a year. The salt air west of the 55 also eats at exterior stucco and wood, which is why we check the wall behind a backsplash for soft drywall before deciding how far demo goes. Over in 92626, near South Coast Metro, we’re working in 1960s – 70s tracts and rental units where the subfloor is often sound but the tile is dated.
Permits for tile and backsplash work are usually not required unless you’re moving plumbing or electrical, which is one reason this job moves faster than a full build-out. Where permits do come in is any change to the electrical inside the backsplash, and the city looks closely at that detail on remodeled kitchens. We pull those permits and pass the inspection before closing out. Costa Mesa’s alleys and shared driveways mean material deliveries stage from the street, so we schedule tile drops around your block’s parking reality.
If the project grows into a larger layout change, our crew carries it through from foundation to finish line, and you can see the full range of what we cover on our Costa Mesa service-area page. Some homeowners also pair this with a Tub-to-Shower Conversion in Costa Mesa while the tile setter is already on site.
Serving Costa Mesa, CA – Our Local Coverage Area
We serve Costa Mesa and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Backsplash, Tile & Flooring in Costa Mesa
A combined floor and backsplash runs 10 – 20 working days once materials are on site, with the floor taking about a week and the backsplash 2 – 4 days after the countertops are set. Specialty tile or slab backsplash can add a week of lead time. Call (888) 578-4462 for a schedule based on your actual kitchen.
Not for tile itself. A permit is required when you move plumbing or add electrical inside the backsplash, and we pull those and pass the inspection before closing out. If your job is tile-only, no permit is needed.
Yes, in most cases. We cut the old backsplash out and patch the wall behind it, and if the countertop is solid the backsplash can be reset against it. If the counter is going too, we sequence the tile so it sits on top of the new counter edge, which is the cleaner finish.
A tile floor runs $3 – $15 per square foot installed, so a 150-square-foot kitchen floor lands around $1,800 – $4,500 depending on material. That’s a fraction of the $14,000 – $45,000 full kitchen remodel range. Call for an exact quote on your square footage.
Our 730-Day Done Right Promise covers workmanship for two full years. If grout fails, tile pops, or a joint opens, we come back and make it right at no charge. Contact us at (888) 578-4462 to schedule your free estimate.
Get a written estimate for your Costa Mesa tile and flooring project
We’ll walk your kitchen, check the subfloor and the wall behind the backsplash, and hand you a line-item estimate with tile, labor, and timeline spelled out, including the 0% financing for 18 months and $1,000 off projects over $10,000. A live person answers the phone any hour, any day. Call (888) 578-4462 to schedule your free on-site estimate.
Written by the team at Groundwork Construction Co. of Irvine.