Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Fountain Valley, CA: What It Costs and How Long It Takes
An aluminum fence in Fountain Valley generally runs $4,000 – $10,000, and most residential jobs are finished in three to five working days once the layout is confirmed and the permit is in hand. That price covers posts, panels, gates, digging and setting posts in concrete, and cleanup. Call (888) 578-4462 and we’ll walk your property, check the setbacks and HOA rules that apply, and give you a written line-item number before anything is ordered.
How an Aluminum Fence Goes In, Stage by Stage
An aluminum fence is a different animal from wood or block. The panels arrive pre-assembled, the posts rack to follow grade, and almost nothing gets built on site. That shortens the job but puts most of the risk into layout and post setting, which is where a good install is won or lost.
Stage 1: Site walk and layout (day 1, roughly two hours)
We mark every post location against your property line, which matters more in Fountain Valley than in most cities because the lots are tight and the side yards are narrow. You confirm gate swings, the fence height, and whether you want the fence to step down a slope or follow it on a racked panel. This is also when we spot sprinkler lines, low-voltage landscape wiring, and gas stub-outs that need to be avoided or relocated.
Stage 2: Permit and HOA approval (one to three weeks, done in parallel)
Most residential aluminum fence work here needs a fence permit, and if you’re in a neighborhood with architectural review, the HOA has to sign off on height, color, and style first. We prepare the drawings and the submittal packet. This is the longest single stretch of the schedule, and it runs while we finalize the order.
Stage 3: Demo and post setting (day 2, one to two days)
If there’s an old fence, it comes out and gets hauled away. Posts go in 24 to 30 inches deep in concrete, spaced to the panel width, and everything gets checked for plumb and line before the concrete sets. Post day is the day you can’t rush. Everything after it is bolt-together work.
Stage 4: Panel, gate, and hardware install (day 3, one long day)
Panels hang, gates get set with self-closing hinges and a latch, and the whole run gets checked for racking and alignment. You walk it with us before we leave. If you’re pairing this with Patios, Walkways & Pool Decks in Fountain Valley, we coordinate the two so the concrete pour and the fence posts don’t fight each other.
Stage 5: Inspection and final walkthrough (within a week)
The city inspects, we touch up anything that shifted, and you get your documentation. Anything that isn’t right under our 730-Day Done Right Promise gets fixed, not argued about.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
- Residential grade vs. heavy commercial grade: Standard residential aluminum is around 1⅜-inch square pickets with a thinner wall. Commercial grade uses thicker walls and bigger posts. On a tight Fountain Valley side yard with foot traffic, the heavier grade holds up better, but it pushes the job toward the top of the range.
- Racking vs. stepping: Racked panels follow the slope of the ground in one continuous line. Stepped panels are level and drop in little stairs. Racked looks cleaner on gentle grade, stepped is the only option on steep drops.
- Color and finish: Powder coat is standard, and black or bronze are the two colors most HOAs here will approve. Custom colors add lead time, not usually cost.
- Picket spacing and height: Four feet is the typical pool-safe height, five feet gives more privacy. Narrow spacing costs more per foot but looks tighter and keeps small dogs in.
- Gates: A single walk gate is the baseline. Pool code often requires self-closing, self-latching hardware, and double driveway gates need a drop rod or an automatic opener.
Brands matter less than gauge and finish quality. Jerith and ActiveYards both make solid residential lines with good powder coat warranties, and we’ll show you the sample racks so you can feel the wall thickness yourself.
What an Aluminum Fence Costs in Fountain Valley, CA
Plan on $4,000 – $10,000 for a typical residential aluminum fence. The low end covers a short run with a single gate and standard residential grade; the high end is a long perimeter, commercial-grade panels, pool-code hardware, and a double gate.
Five things move the number:
- Linear feet: The biggest driver. Every additional 10 feet of run adds roughly $300 – $600 depending on grade and gate count.
- Gate count and type: A walk gate runs $400 – $900 installed; a double driveway gate can run $1,200 – $2,500 with hardware.
- Old fence removal: Demo and haul-off of an existing wood or chain link fence adds $300 – $800 and a dumpster.
- Grade and soil: A flat lot sets fast. A sloped run with rock or roots takes longer to dig and pushes labor up.
- Permit scope and HOA submittals: Standard fence permit is modest, but architectural review and any pool-code upgrades add time and cost.
Our written estimate includes panels, posts, concrete, hardware, gates, permit pulling, haul-off, and cleanup. It does not include relocating sprinkler lines or utility stub-outs that need to come out of the fence line, or repairing damaged concrete or pavers at the post locations. Those are line items you’ll see in writing before work starts, not surprises halfway through.
See the difference
Before
After
Before
After
Before
AfterWhat Fountain Valley’s Housing Stock Does to This Job
Fountain Valley was built out almost entirely as a master-planned bedroom suburb in the 1960s and 70s, so nearly every aluminum fence we install here goes into a fixed, aging single-story tract home on a standard suburban lot. That changes the job in specific ways. Tight side-yard access is the rule, not the exception, and a lot of our estimates include hand-carrying panels through a gate because a truck can’t reach the back line.
The original tract fences are long gone or falling apart, and the fence line often sits against mature trees or a wall that’s seen fifty years of sun. Marine-influenced dampness off the coast accelerates rust on anything not powder coated, and the Santa Ana winds in fall push grit and debris against the panels, which is one reason a heavier gauge pays off here.
If your fence project is part of a full Fence Installation in Fountain Valley plan that includes a shared property line or a driveway gate, we sequence the lay-out with any Driveway Repair & Replacement in Fountain Valley so the gate posts land on solid footing, not cracked concrete. We install aluminum fence across all of Fountain Valley, including the 92708 and 92728 ZIP codes, and the work is scheduled like any other exterior job here: on the calendar, in writing, with the permit pulled first.
Serving Fountain Valley, CA – Our Local Coverage Area
We serve Fountain Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Aluminum Fence in Fountain Valley
Most aluminum fence installs take three to five working days on site once permits clear, with the permit phase adding one to three weeks before that. Post setting and hardware day are the two long days; everything else is clearing and inspection.
Yes, most residential aluminum fence work here requires a fence permit, and HOA architectural review typically comes first if your neighborhood has it. We prepare the drawings and the submittal packet and pull the permit as part of the job, not as a separate errand you handle.
In most cases yes, because we can shift a post a few inches off layout to miss a sprinkler head or a low-voltage line. When a gas stub-out or a main water line sits exactly where a post must go, we flag it before work starts and show you the relocation cost up front.
Not on day one, but it’s often cheaper over the life of the fence because aluminum doesn’t rot, termites don’t care about it, and the powder coat holds its color for years with a rinse. A wood perimeter here has to be restained regularly and replaced in a decade or so; aluminum perimeter fencing runs $4,000 – $10,000 and stays put.
Every aluminum fence we install is covered by our 730-Day Done Right Promise on workmanship, and the manufacturer’s powder coat and structural warranty covers the panels. If a post leans or a gate sags in the first two years, one call gets it corrected.
Get a Free Aluminum Fence Estimate in Fountain Valley
Call (888) 578-4462 and we’ll schedule a free on-site estimate. We’ll walk the line with you, note the setbacks, the gate locations, and the slope, and give you a written number the same visit. No change orders, no surprises. If you want the broader plan first, our Fence Installation service page covers the full scope we handle. Live person on the line, every day.
Written by the team at Groundwork Construction Co. of Irvine.