Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Huntington Beach, CA: What It Costs and How Long It Takes
A tub-to-shower conversion in Huntington Beach typically runs $3,500 – $10,000 and takes 5 to 10 working days once work starts. The job means pulling the old tub and its surround, reworking the drain and valve to fit a shower pan, building a waterproofed base and walls, and setting new tile and glass. In the older tract homes we work on here, the honest range often lands closer to the middle because the drain and rough framing need attention once the tub comes out. Call (888) 578-4462 for a free on-site estimate with a written line-item quote.
How a Tub-to-Shower Conversion Actually Unfolds, Day by Day
Tub-to-shower conversion is not a swap. It is a small, controlled demolition followed by a rebuild of a wet wall and a floor, and each stage has a decision the homeowner owns. Here is the real sequence.
Stage 1: Site protection and tear-out (day 1)
We mask the paths, lay floor protection, and cut the water. The tub, surround, and any existing backer come out in a few hours. This is the moment we find the truth: rotted subfloor near the drain, a valve that no longer matches available trim kits, or a surprise of galvanized pipe in a 1950s home. Most single-day teardowns reveal at least one item to decide on, and we show you photos before anything changes the number.
Stage 2: Rough plumbing and framing (days 1 – 2)
The drain gets moved to the new shower pan location and the valve gets set at a height that satisfies the code official. Here you decide whether to keep the existing shower valve location or shift it, which changes the scope. We bring in licensed rough plumbing and, where the wall needs it, new framing. This is where we build the pan and set the waterproofing.
Stage 3: Waterproofing and inspection (days 2 – 3)
We install a pan liner or a bonded waterproofing membrane, then a flood test, which holds water for a defined period before an inspection. That test cannot be skipped or hurried, and we don’t. You get the pass notification, and the tile layout is next.
Stage 4: Tile, glass, and trim (days 3 – 8)
Wall tile, floor tile, niches, and trim go up, then cure. This is your big decision point: tile size (large-format 12×24 cuts cleaning time but shows layout math), grout type, and whether the glass is framed or frameless. We set the glass enclosure after thinset cure to avoid shifting.
Stage 5: Fixtures, finish, and walkthrough (days 8 – 10)
Shower head, valve trim, drain cover, caulk, and a final clean. We walk the pan, check the slope, and confirm the door swings and seals. The last step is the record of the job for your 730-Day Done Right Promise, which covers workmanship for two years from completion.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Shape Your Conversion: Materials and Configuration
Two showers at the same price can feel entirely different. These are the real forks in the road.
- Tub-out layout vs. full pan rebuild. The tub alcove is often 60 inches long and 30 to 32 inches deep. A code-compliant shower needs a minimum interior of 30 by 30 inches. If the alcove is long enough, you keep the footprint; if not, we rework framing. Keeping the footprint is the cheaper path.
- Tile vs. prefab surround. A solid-surface or acrylic panel system is faster, easier to clean, and cheaper, but it looks like a hotel. Ceramic or porcelain tile looks custom and lasts decades, but the waterproofing and labor push the number up. Most Huntington Beach owners choose tile on the visible walls and accept a panel on the back wall.
- Shower pan material. A preformed acrylic pan is quick and forgiving. A custom-tiled pan with a liner lets us set patterns, but it depends on the flood test and slope, and it costs more in labor.
- Glass type. A framed semi-frameless enclosure with tempered glass runs at the low end of the glass line-item. A frameless glass panel with heavier hinges costs more, and it needs a stable wall and a level curb.
- Grab bars and aging-in-place fixtures. A shower is the right place to add blocking for future grab bars. Doing it now costs little; opening the wall later costs much more.
What a Tub-to-Shower Conversion Costs in Huntington Beach, CA
Across Huntington Beach, the job runs $3,500 to $10,000. Most of our conversions land in the middle of that range, with a small, fast acrylic-panel job at the low end and a tile-and-frameless-glass job at the top. Here is roughly where the money goes:
| Line item | Typical range |
|---|---|
| Demo, haul-away, site protection | $300 – $900 |
| Rough plumbing (drain and valve) | $500 – $1,500 |
| Waterproofing and pan | $600 – $1,800 |
| Tile, setting, and grout | $1,200 – $3,500 |
| Glass enclosure | $600 – $1,800 |
| Shower head, valve trim, drain | $250 – $800 |
Five variables push a job toward the bottom or the top of the $3,500 – $10,000 window:
- Footprint. Keeping the existing tub alcove is the biggest lever. Reworking the drain or framing adds labor and time.
- Condition behind the wall. Rot, galvanized pipe, or undersized framing in a 1960s home adds cost.
- Material grade. Prefab panels and basic ceramic tile cluster at the low end; large-format porcelain and frameless glass cluster at the top.
- Glass. A framed kit versus a frameless custom panel is a meaningful jump.
- Permit scope. The plan review and inspection fees are part of the job. We pull the permits and pass the inspections, so nothing gets skipped to save money.
Your written estimate shows the line items and a fixed price. The number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Huntington Beach Homes Specifically Do to This Conversion
Huntington Beach is a mix of eras sitting a few blocks apart, and that shapes the job. The city is dominated by 1950s – 1970s single-family tract homes in the 92648 and 92646 grids, many with original galvanized plumbing and older slab or pier-and-beam foundations. Pull the tub on one of those and you sometimes find a drain line that has to be replaced to meet current code, and a wall that was never built for a shower’s weight. Oceanfront salt air and marine humidity accelerate corrosion on fasteners and metal trim, so we specify stainless and corrosion-resistant hardware here rather than standard fasteners. In 92648 the patchwork of old beach bungalows beside new three-story homes means drainage has been redirected on some blocks, which shows up as damp subfloor edges. The job also has to respect the coastal zone requirements and the floodplain and seismic upgrades that apply to some lots, so we check the property and the permit path early. Huntington Beach HOA and coastal review boards can add a step when glass or an exterior window changes, which is why we confirm the scope in writing before we order materials. If you are also replacing the roof around the same time, some owners pair this with Metal Roofing in Huntington Beach or Tile Roofing in Huntington Beach to keep the exterior trades under one plan.
Serving Huntington Beach, CA – Our Local Coverage Area
We serve Huntington Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tub-to-Shower Conversion in Huntington Beach
Most conversions take 5 to 10 working days from teardown to final clean, with the pan flood test and inspection adding a fixed 1 to 3 days in the middle. If we find plumbing or framing that has to be rebuilt, add 2 to 4 days. Call (888) 578-4462 and we’ll give you a schedule with your estimate.
Yes, in nearly every case. A conversion changes the drain and valve and involves waterproofing and an inspection, and the city treats it as a bathroom alteration requiring a permit and inspection. We pull the permit and coordinate the inspection as part of the job. Call (888) 578-4462 to talk through your property’s situation.
Often yes, if your tub alcove is at least 60 inches long and roughly 30 inches deep, which most are. In that case we keep the footprint, re-set the drain to the new pan, and avoid the extra framing. We confirm the footprint at the free estimate, before any work starts.
It runs $3,500 to $10,000, with the low end for a prefab panel and acrylic pan and the high end for full tile and frameless glass. Repairs behind the wall and a moved drain push toward the top. Call (888) 578-4462 for a written line-item quote; estimates are free.
Every tub-to-shower conversion is covered by our 730-Day Done Right Promise, so if the workmanship isn’t right, we make it right for two years from completion. That covers our installation, not just the materials. Call (888) 578-4462 with questions about the warranty.
Get a Free Tub-to-Shower Conversion Estimate in Huntington Beach
Schedule a free on-site estimate and we’ll measure the alcove, check what’s behind the wall, and leave you with a written, itemized price, a realistic schedule, and the permit path spelled out. You’ll also hear about our $1,000 off projects over $10,000 and 0% financing for 18 months. Call (888) 578-4462 and a live person picks up. If you’re planning a broader rebuild, start with Bathroom Remodeling in Huntington Beach. We serve the whole city, from the 92648 beach blocks to the 92646 tract grids, all through our Huntington Beach service area and our Bathroom Remodeling team.
Written by the team at Groundwork Construction Co.